Learning hyperelastic anisotropy from data via a tensor basis neural network

Fuhg, J. N.; Bouklas, N.; Jones, R. E.

doi:10.1016/j.jmps.2022.105022

Learning hyperelastic anisotropy from data via a tensor basis neural network

Journal Article · Tue Nov 01 00:00:00 EDT 2022 · Journal of the Mechanics and Physics of Solids

DOI:https://doi.org/10.1016/j.jmps.2022.105022· OSTI ID:1883243

; Bouklas, N.;

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003525

OSTI ID:: 1883243

Journal Information:: Journal of the Mechanics and Physics of Solids, Journal Name: Journal of the Mechanics and Physics of Solids Journal Issue: C Vol. 168; ISSN 0022-5096

Publisher:: ElsevierCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (64)

Autoprogressive training of neural network constitutive models Ghaboussi, Jamshid; Pecknold, David A.; Zhang, Mingfu International Journal for Numerical Methods in Engineering, Vol. 42, Issue 1 https://doi.org/10.1002/(SICI)1097-0207(19980515)42:1<105::AID-NME356>3.0.CO;2-V	journal	May 1998
Polyconvex energies and symmetry requirements Podio-Guidugli, Paolo Journal of Elasticity, Vol. 26, Issue 3 https://doi.org/10.1007/BF00041891	journal	November 1991
On isotropic integrity bases Smith, G. F. Archive for Rational Mechanics and Analysis, Vol. 18, Issue 4 https://doi.org/10.1007/BF00251667	journal	January 1965
Isotropic integrity bases for vectors and second-order tensors: Part I Spencer, A. J. M.; Rivlin, R. S. Archive for Rational Mechanics and Analysis, Vol. 9, Issue 1 https://doi.org/10.1007/BF00253332	journal	January 1962
Integrity bases for vectors ? The crystal classes Smith, G. F.; Rivlin, R. S. Archive for Rational Mechanics and Analysis, Vol. 15, Issue 3 https://doi.org/10.1007/BF00275631	journal	January 1964
The theory of matrix polynomials and its application to the mechanics of isotropic continua Spencer, A. J. M.; Rivlin, R. S. Archive for Rational Mechanics and Analysis, Vol. 2, Issue 1 https://doi.org/10.1007/BF00277933	journal	January 1958
Finite integrity bases for five or fewer symmetric 3×3 matrices Spencer, A. J. M.; Rivlin, R. S. Archive for Rational Mechanics and Analysis, Vol. 2, Issue 1 https://doi.org/10.1007/BF00277941	journal	January 1958
Convexity conditions and existence theorems in nonlinear elasticity Ball, John M. Archive for Rational Mechanics and Analysis, Vol. 63, Issue 4 https://doi.org/10.1007/BF00279992	journal	December 1976
Material symmetry restrictions on non-polynomial constitutive equations Pipkin, A. C.; Wineman, A. S. Archive for Rational Mechanics and Analysis, Vol. 12, Issue 1 https://doi.org/10.1007/BF00281238	journal	January 1963
Material symmetry restrictions on constitutive equations Wineman, A. S.; Pipkin, A. C. Archive for Rational Mechanics and Analysis, Vol. 17, Issue 3 https://doi.org/10.1007/BF00282437	journal	January 1964
A polyconvex hyperelastic model for fiber-reinforced materials in application to soft tissues Ehret, Alexander E.; Itskov, Mikhail Journal of Materials Science, Vol. 42, Issue 21 https://doi.org/10.1007/s10853-007-1812-6	journal	August 2007
On the anisotropic elastic properties of woods Katz, J. Lawrence; Spencer, Paulette; Wang, Yong Journal of Materials Science, Vol. 43, Issue 1 https://doi.org/10.1007/s10853-007-2121-9	journal	September 2007
State-of-the-Art and Comparative Review of Adaptive Sampling Methods for Kriging Fuhg, Jan N.; Fau, Amélie; Nackenhorst, Udo Archives of Computational Methods in Engineering, Vol. 28, Issue 4 https://doi.org/10.1007/s11831-020-09474-6	journal	August 2020
A Selection of Benchmark Problems in Solid Mechanics and Applied Mathematics Schröder, Jörg; Wick, Thomas; Reese, Stefanie Archives of Computational Methods in Engineering, Vol. 28, Issue 2 https://doi.org/10.1007/s11831-020-09477-3	journal	September 2020
Anisotropy Properties of Tissues: A Basis for Fabrication of Biomimetic Anisotropic Scaffolds for Tissue Engineering Datta, Pallab; Vyas, Veena; Dhara, Santanu Journal of Bionic Engineering, Vol. 16, Issue 5 https://doi.org/10.1007/s42235-019-0101-9	journal	September 2019
Microstructural image analysis applied to fibre composite materials: a review Guild, F. J.; Summerscales, J. Composites, Vol. 24, Issue 5 https://doi.org/10.1016/0010-4361(93)90246-5	journal	July 1993
On the representation of constitutive relations using structure tensors Svendsen, Bob International Journal of Engineering Science, Vol. 32, Issue 12 https://doi.org/10.1016/0020-7225(94)90085-X	journal	December 1994
Material symmetry and the evolution of anisotropies in a simple material—I. Change of reference configuration Negahban, Mehrdad; Wineman, Alan S. International Journal of Non-Linear Mechanics, Vol. 24, Issue 6 https://doi.org/10.1016/0020-7462(89)90017-6	journal	January 1989
Application of polycrystal plasticity to sheet forming Beaudoin, A. J.; Dawson, P. R.; Mathur, K. K. Computer Methods in Applied Mechanics and Engineering, Vol. 117, Issue 1-2 https://doi.org/10.1016/0045-7825(94)90076-0	journal	July 1994
Multilayer feedforward networks are universal approximators Hornik, Kurt; Stinchcombe, Maxwell; White, Halbert Neural Networks, Vol. 2, Issue 5 https://doi.org/10.1016/0893-6080(89)90020-8	journal	January 1989
Polyconvexity of generalized polynomial-type hyperelastic strain energy functions for near-incompressibility Hartmann, Stefan; Neff, Patrizio International Journal of Solids and Structures, Vol. 40, Issue 11 https://doi.org/10.1016/S0020-7683(03)00086-6	journal	June 2003
Microstructural imaging techniques: a comparison between light and scanning electron microscopy Trimby, Patrick W.; Prior, David J. Tectonophysics, Vol. 303, Issue 1-4 https://doi.org/10.1016/S0040-1951(98)00263-7	journal	March 1999
A simple orthotropic, transversely isotropic hyperelastic constitutive equation for large strain computations Bonet, J.; Burton, A. J. Computer Methods in Applied Mechanics and Engineering, Vol. 162, Issue 1-4 https://doi.org/10.1016/S0045-7825(97)00339-3	journal	August 1998
Full-field bulge test for planar anisotropic tissues: Part II – A thin shell method for determining material parameters and comparison of two distributed fiber modeling approaches Tonge, Theresa K.; Voo, Liming M.; Nguyen, Thao D. Acta Biomaterialia, Vol. 9, Issue 4 https://doi.org/10.1016/j.actbio.2012.11.034	journal	April 2013
Simulating anisotropic frictional response using smoothly interpolated traction fields Jones, Reese E.; Papadopoulos, Panayiotis Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issue 7-8 https://doi.org/10.1016/j.cma.2004.11.028	journal	January 2006
A machine learning based plasticity model using proper orthogonal decomposition Huang, Dengpeng; Fuhg, Jan Niklas; Weißenfels, Christian Computer Methods in Applied Mechanics and Engineering, Vol. 365 https://doi.org/10.1016/j.cma.2020.113008	journal	June 2020
Geometric deep learning for computational mechanics Part I: anisotropic hyperelasticity Vlassis, Nikolaos N.; Ma, Ran; Sun, WaiChing Computer Methods in Applied Mechanics and Engineering, Vol. 371 https://doi.org/10.1016/j.cma.2020.113299	journal	November 2020
Sobolev training of thermodynamic-informed neural networks for interpretable elasto-plasticity models with level set hardening Vlassis, Nikolaos N.; Sun, WaiChing Computer Methods in Applied Mechanics and Engineering, Vol. 377 https://doi.org/10.1016/j.cma.2021.113695	journal	April 2021
Unsupervised discovery of interpretable hyperelastic constitutive laws Flaschel, Moritz; Kumar, Siddhant; De Lorenzis, Laura Computer Methods in Applied Mechanics and Engineering, Vol. 381 https://doi.org/10.1016/j.cma.2021.113852	journal	August 2021
Local approximate Gaussian process regression for data-driven constitutive models: development and comparison with neural networks Fuhg, Jan N.; Marino, Michele; Bouklas, Nikolaos Computer Methods in Applied Mechanics and Engineering, Vol. 388 https://doi.org/10.1016/j.cma.2021.114217	journal	January 2022
On physics-informed data-driven isotropic and anisotropic constitutive models through probabilistic machine learning and space-filling sampling Fuhg, Jan N.; Bouklas, Nikolaos Computer Methods in Applied Mechanics and Engineering, Vol. 394 https://doi.org/10.1016/j.cma.2022.114915	journal	May 2022
PRISMS-Plasticity: An open-source crystal plasticity finite element software Yaghoobi, Mohammadreza; Ganesan, Sriram; Sundar, Srihari Computational Materials Science, Vol. 169 https://doi.org/10.1016/j.commatsci.2019.109078	journal	November 2019
Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites Mortazavian, Seyyedvahid; Fatemi, Ali Composites Part B: Engineering, Vol. 72 https://doi.org/10.1016/j.compositesb.2014.11.041	journal	April 2015
Application of the concept of evolving structure tensors to the modeling of initial and induced anisotropy at large deformation Svendsen, B.; Levkovitch, V.; Wang, J. Computers & Structures, Vol. 84, Issue 17-18 https://doi.org/10.1016/j.compstruc.2006.01.037	journal	June 2006
Neural network constitutive model for rate-dependent materials Jung, Sungmoon; Ghaboussi, Jamshid Computers & Structures, Vol. 84, Issue 15-16 https://doi.org/10.1016/j.compstruc.2006.02.015	journal	June 2006
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing Ma, Guowei; Li, Zhijian; Wang, Li Construction and Building Materials, Vol. 202 https://doi.org/10.1016/j.conbuildmat.2019.01.008	journal	March 2019
Mechanical anisotropy of porcine cornea and correlation with stromal microstructure Elsheikh, Ahmed; Alhasso, Daad Experimental Eye Research, Vol. 88, Issue 6 https://doi.org/10.1016/j.exer.2009.01.010	journal	June 2009
Model-data-driven constitutive responses: Application to a multiscale computational framework Fuhg, Jan Niklas; Böhm, Christoph; Bouklas, Nikolaos International Journal of Engineering Science, Vol. 167 https://doi.org/10.1016/j.ijengsci.2021.103522	journal	October 2021
A class of orthotropic and transversely isotropic hyperelastic constitutive models based on a polyconvex strain energy function Itskov, Mikhail; Aksel, Nuri International Journal of Solids and Structures, Vol. 41, Issue 14 https://doi.org/10.1016/j.ijsolstr.2004.02.027	journal	July 2004
A variational approach for materially stable anisotropic hyperelasticity Schröder, J.; Neff, P.; Balzani, D. International Journal of Solids and Structures, Vol. 42, Issue 15 https://doi.org/10.1016/j.ijsolstr.2004.11.021	journal	July 2005
Modeling the anisotropic finite-deformation viscoelastic behavior of soft fiber-reinforced composites Nguyen, T. D.; Jones, R. E.; Boyce, B. L. International Journal of Solids and Structures, Vol. 44, Issue 25-26 https://doi.org/10.1016/j.ijsolstr.2007.06.020	journal	December 2007
Identification of symmetry type of linear elastic stiffness tensor in an arbitrarily orientated coordinate system Zou, W. -N.; Tang, C. -X.; Lee, W. -H. International Journal of Solids and Structures, Vol. 50, Issue 14-15 https://doi.org/10.1016/j.ijsolstr.2013.03.037	journal	July 2013
A strain energy function for arteries accounting for wall composition and structure Zulliger, Martin A.; Fridez, Pierre; Hayashi, Kozaburo Journal of Biomechanics, Vol. 37, Issue 7 https://doi.org/10.1016/j.jbiomech.2003.11.026	journal	July 2004
Machine learning strategies for systems with invariance properties Ling, Julia; Jones, Reese; Templeton, Jeremy Journal of Computational Physics, Vol. 318 https://doi.org/10.1016/j.jcp.2016.05.003	journal	August 2016
Constitutive artificial neural networks: A fast and general approach to predictive data-driven constitutive modeling by deep learning Linka, Kevin; Hillgärtner, Markus; Abdolazizi, Kian P. Journal of Computational Physics, Vol. 429 https://doi.org/10.1016/j.jcp.2020.110010	journal	March 2021
Computational modeling of mechanical anisotropy in the cornea and sclera Pinsky, Peter M.; van der Heide, Dolf; Chernyak, Dimitri Journal of Cataract and Refractive Surgery, Vol. 31, Issue 1 https://doi.org/10.1016/j.jcrs.2004.10.048	journal	January 2005
Using structural tensors for inelastic material modeling in the finite strain regime – A novel approach to anisotropic damage Reese, S.; Brepols, T.; Fassin, M. Journal of the Mechanics and Physics of Solids, Vol. 146 https://doi.org/10.1016/j.jmps.2020.104174	journal	January 2021
Thermodynamics-based Artificial Neural Networks for constitutive modeling Masi, Filippo; Stefanou, Ioannis; Vannucci, Paolo Journal of the Mechanics and Physics of Solids, Vol. 147 https://doi.org/10.1016/j.jmps.2020.104277	journal	February 2021
Polyconvex anisotropic hyperelasticity with neural networks Klein, Dominik K.; Fernández, Mauricio; Martin, Robert J. Journal of the Mechanics and Physics of Solids, Vol. 159 https://doi.org/10.1016/j.jmps.2021.104703	journal	February 2022
Fiber distributed hyperelastic modeling of biological tissues Pandolfi, Anna; Vasta, Marcello Mechanics of Materials, Vol. 44 https://doi.org/10.1016/j.mechmat.2011.06.004	journal	January 2012
Machine-learning convex and texture-dependent macroscopic yield from crystal plasticity simulations Fuhg, Jan N.; van Wees, Lloyd; Obstalecki, Mark Materialia, Vol. 23 https://doi.org/10.1016/j.mtla.2022.101446	journal	June 2022
Computational microstructure characterization and reconstruction: Review of the state-of-the-art techniques Bostanabad, Ramin; Zhang, Yichi; Li, Xiaolin Progress in Materials Science, Vol. 95 https://doi.org/10.1016/j.pmatsci.2018.01.005	journal	June 2018
Nonlinear Solid Mechanics: A Continuum Approach for Engineering Science Holzapfel, Gerhard A. Meccanica, Vol. 37, Issue 4/5, p. 489-490 https://doi.org/10.1023/A:1020843529530	journal	July 2002
Three-dimensional microstructural imaging methods for energy materials Cocco, Alex P.; Nelson, George J.; Harris, William M. Physical Chemistry Chemical Physics, Vol. 15, Issue 39 https://doi.org/10.1039/c3cp52356j	journal	January 2013
Large Sample Properties of Simulations Using Latin Hypercube Sampling Stein, Michael Technometrics, Vol. 29, Issue 2 https://doi.org/10.1080/00401706.1987.10488205	journal	May 1987
A polyconvex model for materials with cubic symmetry Kambouchev, Nayden; Fernandez, Javier; Radovitzky, Raul Modelling and Simulation in Materials Science and Engineering, Vol. 15, Issue 5 https://doi.org/10.1088/0965-0393/15/5/006	journal	June 2007
Predictive constitutive modelling of arteries by deep learning Holzapfel, Gerhard A.; Linka, Kevin; Sherifova, Selda Journal of The Royal Society Interface, Vol. 18, Issue 182 https://doi.org/10.1098/rsif.2021.0411	journal	September 2021
Verification and validation of knowledge-based systems No authors listed IEEE Transactions on Knowledge and Data Engineering, Vol. 11, Issue 1 https://doi.org/10.1109/69.755629	journal	January 1999
Signal Recovery From Random Measurements Via Orthogonal Matching Pursuit Tropp, Joel A.; Gilbert, Anna C. IEEE Transactions on Information Theory, Vol. 53, Issue 12 https://doi.org/10.1109/TIT.2007.909108	journal	December 2007
A Nonlinear Anisotropic Viscoelastic Model for the Tensile Behavior of the Corneal Stroma Nguyen, T. D.; Jones, R. E.; Boyce, B. L. Journal of Biomechanical Engineering, Vol. 130, Issue 4 https://doi.org/10.1115/1.2947399	journal	July 2008
Theory of Representations for Tensor Functions—A Unified Invariant Approach to Constitutive Equations Zheng, Q. -S. Applied Mechanics Reviews, Vol. 47, Issue 11 https://doi.org/10.1115/1.3111066	journal	November 1994
Mechanical Properties of Anisotropic Fiber-Reinforced Composites Chen, C. H.; Cheng, Shun Journal of Applied Mechanics, Vol. 37, Issue 1 https://doi.org/10.1115/1.3408430	journal	March 1970
Frame-Invariant Polyconvex Strain-Energy Functions for Some Anisotropic Solids Steigmann, David J. Mathematics and Mechanics of Solids, Vol. 8, Issue 5 https://doi.org/10.1177/10812865030085004	journal	October 2003
Tensor Basis Gaussian Process Models of Hyperelastic Materials Frankel, Ari L.; Jones, Reese E.; Swiler, Laura P. Journal of Machine Learning for Modeling and Computing, Vol. 1, Issue 1 https://doi.org/10.1615/JMachLearnModelComput.2020033325	journal	January 2020

Similar Records

Accelerating phase-field predictions via recurrent neural networks learning the microstructure evolution in latent space

Journal Article · Fri Jul 01 00:00:00 EDT 2022 · Computer Methods in Applied Mechanics and Engineering · OSTI ID:1873911

Tensor Basis Gaussian Process Models of Hyperelastic Materials

Journal Article · Tue Dec 31 23:00:00 EST 2019 · Journal of Machine Learning for Modeling and Computing (Online) · OSTI ID:1668364

Learning hyperelastic anisotropy from data via a tensor basis neural network

Citation Formats

References (64)

Similar Records

Related Subjects