Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Comparison of Spherical Antennas Fabricated via Conformal Printing: Helix, Meanderline, and Hybrid Designs

Journal Article · · IEEE Antennas and Wireless Propagation Letters
 [1];  [2];  [3];  [4];  [2];  [2]
  1. Univ. of Illinois, Urbana, IL (United States); University of Illinois
  2. Univ. of Illinois, Urbana, IL (United States)
  3. Univ. of California, Santa Barbara, CA (United States)
  4. Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
The design tradeoffs between three spherically conformal electric monopoles-the spherical helix (SH), spherical meanderline (SM), and a hybrid design-are explored through both simulation and measurement. We show that the SH is efficient, but can be difficult to impedance match without external components. On the other hand, the SM antenna has a widely controllable impedance with slightly increased loss. Thus, a hybrid design is proposed that retains the desirable qualities of both the SH and SM. All three designs are fabricated using a conformal printing technique for comparison. Here, we describe the design tradeoffs and physical insights gained through evaluating the efficiency, Q , and matching behavior of these antennas.
Research Organization:
Univ. of Illinois at Urbana-Champaign, IL (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES). Materials Sciences & Engineering Division
DOE Contract Number:
FG02-07ER46471
OSTI ID:
1875093
Journal Information:
IEEE Antennas and Wireless Propagation Letters, Journal Name: IEEE Antennas and Wireless Propagation Letters Vol. 10; ISSN 1536-1225
Publisher:
IEEE
Country of Publication:
United States
Language:
English

References (11)

On the significance of current vector alignment in establishing the resonant frequency of small space-filling wire antennas journal January 2003
New Radiation$Q$Limits for Spherical Wire Antennas journal October 2006
The Radiation Properties of Electrically Small Folded Spherical Helix Antennas journal April 2004
Low Q electrically small linear and elliptical polarized spherical dipole antennas journal March 2005
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces journal January 2011
Limitations in Relating Quality Factor to Bandwidth in a Double Resonance Small Antenna journal January 2007
Tuning Method for a New Electrically Small Antenna With Low $Q$ journal January 2009
A Modal Approach to Tuning and Bandwidth Enhancement of an Electrically Small Antenna journal April 2011
Reactive Energies, Impedance, and ${\rm Q}$ Factor of Radiating Structures journal April 2010
Fundamental Limitations of Small Antennas journal December 1947
Impedance, bandwidth, and Q of antennas journal April 2005

Cited By (5)

A theoretical study of acoustically driven antennas journal January 2020
Inkjet Printed Conductive Pattern and Closed Loop Flash Sintering for Microstrip Antenna book August 2019
Volumetric 3D-printed antennas, manufactured via selective polymer metallization text January 2018
3D-printed spherical dipole antenna integrated on small RF node journal April 2015
Fabrication of conformal array patch antenna using silver nanoink printing and flash light sintering journal August 2018

Similar Records

A Perturbative Solution for Nonlinear Stratified Upwelling over a Frictional Slope
Journal Article · Sun Oct 01 04:00:00 UTC 2023 · Journal of Physical Oceanography · OSTI ID:2580152

Lower Hybrid Antenna Design for MST
Journal Article · Mon Sep 26 04:00:00 UTC 2005 · AIP Conference Proceedings · OSTI ID:20726336

Fundamental cosmology from ANDES precision spectroscopy
Journal Article · Fri May 05 00:00:00 UTC 2023 · Monthly Notices of the Royal Astronomical Society · OSTI ID:1974254