Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

The Geology of The Mt. Simon Sandstone Storage Complex at the Wabash #1 Well, Vigo Co., Indiana (Subtask 7.2, Technical Report)

Technical Report ·
DOI:https://doi.org/10.2172/1866412· OSTI ID:1866412
 [1];  [2];  [3];  [2];  [4];  [2];  [2];  [2];  [2];  [2];  [2];  [2];  [2];  [2];  [2];  [2];  [2]
  1. Univ. of Illinois at Urbana-Champaign, IL (United States); University of Illinois at Urbana-Champaign/Illinois State Geological Survey
  2. Univ. of Illinois at Urbana-Champaign, IL (United States)
  3. Brigham Young Univ., Provo, UT (United States)
  4. Illinois State University (ISU), Normal, IL (United States)

The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for commercial-scale CO2 storage near the site. This report presents an extensive geologic characterization of the Mt. Simon storage complex and relevant data collected from the Wabash #1 well, such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Mt. Simon Sandstone. The Mt. Simon storage complex comprises two major sections: the Mt. Simon Sandstone as the potential reservoir and the overlying Eau Claire Formation as its primary seal. Within the report, an extensive depositional, sedimentological, and geochronologic characterization of the Mt. Simon is included with supportive chapters on the regional geology and the geophysical, petrophysical, and petrologic data collected during the project. An overview of 2D seismic reflection data collected from and around the test well is presented. Also presented are chapters on the characterization of the sealing Eau Claire Formation, including a chapter on the capacity of the primary and secondary seals to the Mt. Simon as well as a chapter on geomechanical testing results of the Eau Claire Formation and Mt. Simon Sandstone. Some of the information discussed in this report was used in the development of static and dynamic geologic models of the Mt. Simon Sandstone storage complex. The static and dynamic modeling of CO2 injection in the Mt. Simon Sandstone are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.

Research Organization:
Univ. of Illinois at Urbana-Champaign, IL (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
FE0031626
OSTI ID:
1866412
Report Number(s):
DOE-FE0031626‐9
Country of Publication:
United States
Language:
English

Similar Records

Wabash CarbonSAFE. Geologic Analysis of the Potosi Dolomite Reservoir Interval and Potential Confining Units, at the Wabash #1 Well, Vigo Co., Indiana, Subtask 7.2, Technical Report
Technical Report · Mon Apr 25 00:00:00 EDT 2022 · OSTI ID:1866416

Wabash CarbonSAFE: Detailed Site Characterization Plan, Task 11.0, Technical Report
Technical Report · Tue Apr 26 00:00:00 EDT 2022 · OSTI ID:1866419

Wabash CarbonSAFE. Final Report
Technical Report · Mon Jun 27 00:00:00 EDT 2022 · OSTI ID:1874030