Characterization of an electrically conductive proppant for fracture diagnostics
- Formerly The University of Texas at Austin, Hildebrand Department of Petroleum and Geosystems Engineering, Austin, Texas 78712, USA, presently Schlumberger, Houston, Texas 77042, USA.(corresponding author).; OSTI
- The University of Texas at Austin, Hildebrand Department of Petroleum and Geosystems Engineering, Austin, Texas 78712, USA..
Fracture diagnosis with electromagnetic (EM) and electrical tools requires proppants with high electrical conductivity and mechanical strength. Lab measurements of the electrical and hydraulic conductivity of proppants are critical for selecting the best candidates. Such measurements greatly benefit simulations, field tests, and the ultimate application of such proppants in the field. To that end, a new lab protocol is developed for measuring the electrical and hydraulic conductivity of proppants. The lab setup, which mainly includes a resistivity core holder and a Hassler sleeve core holder, allows for simulation of realistic pressure and temperature conditions when making measurements. Petroleum coke (PC) is proposed as a candidate proppant because of its widespread availability and low cost. Lab measurements show that the effective electrical conductivity of pure PC in a model fracture is approximately 5000 S/m, under a closure stress greater than [Formula: see text] (4000 psi). When PC is mixed with sand, the effective electrical conductivity of the mixture decreases with an increasing weight percentage of sand. Although sand degrades the contact between PC particles, the electrical conductivity stays reasonably high (approximately 1700 S/m) when 50% sand is added. Hydraulic conductivity measurements show that when a fracture is propped with pure PC, the measured fracture conductivity is greater than [Formula: see text] ([Formula: see text]) (dimensionless fracture conductivity greater than 100 for a shale with [Formula: see text] or 100 nD permeability) under a confining pressure of [Formula: see text] (6000 psi). This means that a fracture propped with PC is infinitely conductive in a typical shale formation. When sand is added, the fracture’s hydraulic conductivity becomes even higher, which clearly shows PC’s ability of sustaining high stresses. The proposed protocol provides a robust and effective method that can be generalized for lab testing for other candidate proppants. The data presented clearly show that PC has the potential for field-scale applications in EM hydraulic fracture diagnostics.
- Research Organization:
- E-Spectrum Technologies, Inc., San Antonio, TX (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- SC0015986
- OSTI ID:
- 1852045
- Journal Information:
- Geophysics, Journal Name: Geophysics Journal Issue: 1 Vol. 86; ISSN 0016-8033
- Publisher:
- Society of Exploration Geophysicists
- Country of Publication:
- United States
- Language:
- English
Similar Records
Fracture analysis of ceramic proppants
Proppant backflow: Mechanical and flow considerations