skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Oxidation kinetic modelling of Fe-based oxygen carriers for chemical looping applications: Impact of the topochemical effect

Journal Article · · Applied Energy
 [1];  [1];  [1];  [1];  [1]
  1. The Ohio State Univ., Columbus, OH (United States). William G. Lowrie Dept. of Chemical and Biomolecular Engineering

Chemical looping is a promising technology for fossil fuel utilization due to its high fuel conversion efficiency with in-situ CO2 capture capability. Metal oxide are used as oxygen carriers (OCs) and circulate between a fuel reactor and an air reactor to perform reduction and oxidation reactions, respectively. In general, OC exiting the fuel reactor is not reduced fully to its metallic state due to many factors including carbon deposition and OC deactivation. Therefore, the effect of the initial reduction state on the OC oxidation in the air reactor is a significant parameter for consideration in developing the oxidation kinetic model. The objective of this work is to develop a physically significant kinetic model that applies to the oxidation of both initially fully and partially reduced OC with air. For this study, 1.5 mm Fe-based OC particle supported with TiO2 was used as the model OC particle due to its complex multistep reaction nature. The oxidation kinetics were experimentally investigated in a thermogravimetric analyzer (TGA). Results indicate a significant difference in the oxidation rate profile for the OCs when oxidized from an initially fully reduced compared to an initially partially reduced state. Elemental mapping via energy-dispersive X-ray spectroscopy (EDS) reveals a shrinking-core type topochemical pattern across the OC particle, which was identified to be the cause of the dependency of kinetics on the initial reduction state. A generalized kinetic model was developed based on the observed shrinking-core behavior without presuming any rate-determining steps and experimentally validated over a broad range of temperatures (800–1000 °C) and oxygen concentrations (5, 7, 10, and 15 mol%). Impacts of particle porosity, size, and core-shell structure on the OC oxidation kinetics were analyzed in the developed oxidation kinetic model to suggest methods of improving the oxidation rate of the OC without modifying the chemical composition.

Research Organization:
The Ohio State University, Columbus, OH (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
Grant/Contract Number:
FE0029093
OSTI ID:
1849217
Alternate ID(s):
OSTI ID: 1809535
Journal Information:
Applied Energy, Vol. 279, Issue C; ISSN 0306-2619
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (46)

Particle scale modeling of CuFeAlO4 during reduction with CO in chemical looping applications journal October 2019
Thermodynamic possibilities and constraints for pure hydrogen production by a nickel and cobalt-based chemical looping process at lower temperatures journal February 2008
Reduction and Oxidation Kinetics of a Copper-Based Oxygen Carrier Prepared by Impregnation for Chemical-Looping Combustion journal December 2004
Design and Operations of a 15 kW th Subpilot Unit for the Methane-to-Syngas Chemical Looping Process with CO 2 Utilization journal December 2019
Multicycle Reduction and Oxidation of Different Types of Iron Oxide ParticlesApplication to Chemical-Looping Combustion journal May 2004
Optimization of H2 production with CO2 capture by steam reforming of methane integrated with a chemical-looping combustion system journal September 2013
Morphological Changes and Reduction Mechanism for the Weak Reduction of the Preoxidized Panzhihua Ilmenite journal January 2014
Progress in Chemical-Looping Combustion and Reforming technologies journal April 2012
Reduction and oxidation kinetics of Mn3O4/Mg–ZrO2 oxygen carrier particles for chemical-looping combustion journal December 2007
Scanning Electron Microscopy and X-ray Microanalysis book January 2003
Bimetallic BaFe2MAl9O19 (M = Mn, Ni, and Co) hexaaluminates as oxygen carriers for chemical looping dry reforming of methane journal January 2020
Role of isoconversional methods in varying activation energies of solid-state kinetics journal October 2005
Phase interactions in Ni-Cu-Al2O3 mixed oxide oxygen carriers for chemical looping applications journal February 2019
Thermodynamic possibilities and constraints for pure hydrogen production by iron based chemical looping process at lower temperatures journal December 2007
Chemical-Looping Combustion with NiO and Fe 2 O 3 in a Thermobalance and Circulating Fluidized Bed Reactor with Double Loops journal April 2006
Solid-State Kinetic Models:  Basics and Mathematical Fundamentals journal September 2006
Kinetics of the reduction of hematite (Fe2O3) by methane (CH4) during chemical looping combustion: A global mechanism journal October 2013
A particle-scale reduction model of copper iron manganese oxide with CO for chemical looping combustion journal March 2020
Oxidation Kinetics of Cement-bonded Natural Ilmenite Pellets. journal January 1992
Fate of sulfur in coal-direct chemical looping systems journal December 2017
Kinetics of Hematite to Wüstite by Hydrogen for Chemical Looping Combustion journal July 2014
The investigations of hematite-CuO oxygen carrier in chemical looping combustion journal June 2017
Shale gas-to-syngas chemical looping process for stable shale gas conversion to high purity syngas with a H2: CO ratio of 2 : 1 journal January 2014
Reduction Kinetics of Cu-, Ni-, and Fe-Based Oxygen Carriers Using Syngas (CO + H2) for Chemical-Looping Combustion journal July 2007
NiO/CaAl2O4 as active oxygen carrier for low temperature chemical looping applications journal November 2015
Kinetics and reaction mechanism of isothermal oxidation of Iranian ilmenite concentrate powder journal September 2012
Temperature variations in the oxygen carrier particles during their reduction and oxidation in a chemical-looping combustion system journal February 2005
Kinetics of the oxidation of ilmenite journal February 1975
Recent advancements in chemical looping water splitting for the production of hydrogen journal January 2016
Reduction and oxidation properties of Fe2O3/ZrO2 oxygen carrier for hydrogen production journal November 2014
Reactivity of Some Metal Oxides Supported on Alumina with Alternating Methane and Oxygen - Application for Chemical-Looping Combustion journal May 2003
CO2-free conversion of CH4 to syngas using chemical looping journal December 2020
Reduction of hematite (Fe2O3) to wüstite (FeO) by carbon monoxide (CO) for chemical looping combustion journal April 2014
New Method for Prediction of Binary Gas-Phase Diffusion Coefficients journal May 1966
A novel chemical looping partial oxidation process for thermochemical conversion of biomass to syngas journal July 2018
Ilmenite oxidation kinetics for pressurized chemical looping combustion of natural gas journal March 2019
Hydrogen reduction mechanisms of ilmenite between 823 and 1353 K journal March 1991
A unified approach to kinetic processing of nonisothermal data journal January 1996
Kinetics of redox reactions of ilmenite for chemical-looping combustion journal February 2011
250 kWth high pressure pilot demonstration of the syngas chemical looping system for high purity H2 production with CO2 capture journal November 2018
Phase transitions, micro-morphology and its oxidation mechanism in oxidation of ilmenite (FeTiO3) powder journal August 2013
Kinetic determination of a highly reactive impregnated Fe2O3/Al2O3 oxygen carrier for use in gas-fueled Chemical Looping Combustion journal December 2014
On the pseudo steady state approximation for gas solid reactions journal June 1968
Gaseous reduction of iron oxides: Part I. Reduction of hematite in hydrogen journal November 1971
Chemical-looping combustion of solid fuels – Status of development journal January 2014
Phase Transitions and Reaction Mechanism of Ilmenite Oxidation journal February 2010