Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Diagnostic assessment of reservoir response to fracturing: a case study from Hydraulic Fracturing Test Site (HFTS) in Midland Basin

Journal Article · · Journal of Petroleum Exploration and Production Technology

Abstract

This paper outlines a data collection and diagnostics case study involving multiple horizontal shale wells. We look at well production profiles using rate transient analysis, differences in near wellbore complexity, geologic variations within the area of interest, as well as compositional differences in the rocks based on cores obtained from within the stimulated reservoir. The Hydraulic Fracturing Test Site is a multi-well experiment involving stimulation of unconventional shale wells in the southeastern Midland portion of the Permian Basin. The targeted formations include both the upper as well as the middle Wolfcamp formations, also referred alternatively as Wolfcamp A and Wolfcamp B. Data integration and analysis shared in this paper help us understand the various geologic controls impacting well productivity, particularly the wide variance observed between the Wolfcamp A and Wolfcamp B formations. Rate transient analysis indicates similar system permeabilities for stimulated wells. However, we observe higher effective fracture half-lengths for upper Wolfcamp wells. Using observations from 3D seismic interpretations (such as pad scale faults) as well as petrophysical and image log data, we highlight the substantial differences in stimulation as we move along the well laterals from the heel toward the toe sections. These differences are further reconciled with observations from zones with high data density at the core locations through stimulated rock, as well as independent data such as microseismic emissions. At the test site, Wolfcamp A was found to be relatively quartz rich with significant heterogeneity whereas Wolfcamp B is richer in clay and organic content. This impacts the geomechanical characteristics of the rock mass with much higher natural fracture density in the shallower interval. Thus, the fracture growth is more uniform in the deeper interval and more heterogeneous with branching likely in upper interval. Increased complexity also leads to consistently better productivity from the wells in the shallower interval as demonstrated from RTA results. This case study is unique because it provides valuable insights from actual sampling of the stimulated zones in hydraulically fractured wells and helps understand impact of various factors that contribute toward variability in well production. The findings from this study provides insights into need for optimization of completion designs in the various Wolfcamp landing zones, such as optimization of cluster or fracture spacing in various Wolfcamp intervals. In addition, it provides a useful template for data collection and research direction in future field test sites of similar nature in unconventional reservoirs.

Research Organization:
Gas Technology Institute, Des Plaines, IL (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
FE0024292
OSTI ID:
1849142
Journal Information:
Journal of Petroleum Exploration and Production Technology, Vol. 11, Issue 8; ISSN 2190-0558
Publisher:
Springer Nature - Springer Berlin Heidelberg
Country of Publication:
United States
Language:
English

References (31)

Analyzing Well Production Data Using Combined-Type-Curve and Decline-Curve Analysis Concepts October 1999
Well test, rate transient analysis and reservoir simulation for characterizing multi-fractured unconventional oil and gas reservoirs December 2015
A New Modeling Framework for Multi-Scale Simulation of Hydraulic Fracturing and Production from Unconventional Reservoirs January 2021
Decline Curve Analysis for Variable Pressure Drop/Variable Flowrate Systems January 1991
Variable Pump Rate Fracturing Leads to Improved Production in the Marcellus Shale February 2016
Hydraulic Fracturing Test Site (HFTS) – Project Overview and Summary of Results January 2018
Overview of Hydraulic Fracturing Test Sites (HFTS) in the Permian Basin and Summary of Selected Results (HFTS-I in Midland and HFTS-II in Delaware) January 2020
Rate transient analysis of arbitrarily-oriented, hydraulically-fractured media December 2020
Multi-Phase Rate Transient Analysis Considering Complex Fracture Networks October 2020
Fracture Diagnostics in East Texas and Western Colorado Using the Hydraulic-Impedance Method May 1986
A scaling law to characterize fault-damage zones at reservoir depths October 2014
Frictional properties of shale reservoir rocks: SHALE FRICTIONAL PROPERTIES September 2013
Integrated Analysis of Tracer and Pressure-Interference Tests To Identify Well Interference June 2020
Analysis and Interpretations of Pressure Data from the Hydraulic Fracturing Test Site (HFTS) January 2019
Lithology-controlled stress variations and pad-scale faults: A case study of hydraulic fracturing in the Woodford Shale, Oklahoma November 2017
Using microseismic frequency-magnitude distributions from hydraulic fracturing as an incremental tool for fracture completion diagnostics May 2019
An Interpretation of Proppant Transport Within the Stimulated Rock Volume at the Hydraulic-Fracturing Test Site in the Permian Basin March 2019
Assessment of In-situ Proppant Placement in SRV Using Through-Fracture Core Sampling at HFTS January 2018
Digital Fracture Characterization at Hydraulic Fracturing Test Site HFTS-Midland: Fracture Clustering, Stress Effects and Lithologic Controls April 2021
Enhanced Fracture Entry Friction Analysis of the Rate Step-Down Test January 2007
Practical Applications of Water Hammer Analysis from Hydraulic Fracturing Treatments April 2021
To Interpret Rate Transient Analysis for the Determination of Reservoir Properties November 2019
Diagnosing Fracture Network Pattern and Flow Regime Aids Production Performance Analysis in Unconventional Oil Reservoirs March 2012
Sampling a Stimulated Rock Volume: An Eagle Ford Example January 2017
Stage-Level Data Integration to Evaluate the Fracturing Behavior of Horizontal Wells at the Hydraulic Fracturing Test Site (HFTS): An Insight into the Production Performance January 2020
Mechanical properties of shale-gas reservoir rocks — Part 2: Ductile creep, brittle strength, and their relation to the elastic modulus September 2013
Effect of clay content and mineralogy on frictional sliding behavior of simulated gouges: Binary and ternary mixtures of quartz, illite, and montmorillonite January 2010
Water Hammer Effects on Water Injection Well Performance and Longevity February 2008
Interwell Communication Study of UWC and MWC Wells in the HFTS January 2018
Development of a fully implicit 3-D geomechanical fracture simulator August 2019
Modeling Fracture Closure with Proppant Settling and Embedment during Shut-In and Production May 2020