Low level RF system design for the PEP-II B factory
Conference
·
OSTI ID:184291
- and others
Heavy beam loading in PEP-II has driven the design of the low level RF system to contain feedback loops similar to those used in proton rings. The RF feedback loops control longitudinal coupled-bunch instabilities caused by the beam interaction with the accelerating mode of the RF cavities by reducing the cavity impedance observed by the beam. The RF system employs a modular design housed in a VXI environment and uses the EPICS control system. Modem control system design and signal processing is used throughout the system. This paper describes the RF system topology and the signal processing used to fulfill the system requirements.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 184291
- Report Number(s):
- SLAC-PUB--95-6855; CONF-950512--351; ON: DE96005907
- Country of Publication:
- United States
- Language:
- English
Similar Records
Commissioning experience with the PEP-II low-level RF system
Architecture and Performance of the PEP-II Low-Level RF System
Experience with the PEP-II RF System at High Beam Currents
Conference
·
Thu May 01 00:00:00 EDT 1997
·
OSTI ID:532595
Architecture and Performance of the PEP-II Low-Level RF System
Technical Report
·
Wed Apr 14 00:00:00 EDT 1999
·
OSTI ID:10204
Experience with the PEP-II RF System at High Beam Currents
Technical Report
·
Thu Jul 06 00:00:00 EDT 2000
·
OSTI ID:763817