Isothermal and isobaric desorption of carbon dioxide by purge
- Air Products and Chemicals, Inc., Allentown, PA (United States)
Adsorption and desorption constitute the two most basic steps in all pressure swing adsorption (PSA) processes for gas separation. The desorption steps are the primary energy-consuming steps in the PSA process. They also dictate the overall separation efficiency. Isothermal and isobaric desorption of carbon dioxide was experimentally evaluated by purging adsorbent columns saturated with pure carbon dioxide with pure hydrogen, nitrogen, and methane. Three different activated carbons and two zeolites were investigated as adsorbents. The effects of purge gas flow rate, system pressure and temperature, strength of carbon dioxide adsorption, and selectivity of adsorption between carbon dioxide and the purge gas on the desorption process were measured. Instantaneous local equilibrium between gas and adsorbed phases was established under the conditions of the experiments. An analytical mathematical model for isothermal and isobaric desorption of binary gas mixtures by purge was developed. It was demonstrated that the efficiency of desorption by purge can be increased by (1) lowering the desorption pressure, (2) increasing the adsorbent temperature, and (3) increasing the selectivity of adsorption of the purge gas over the desorbing component.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 183056
- Journal Information:
- Industrial and Engineering Chemistry Research, Journal Name: Industrial and Engineering Chemistry Research Journal Issue: 8 Vol. 34; ISSN IECRED; ISSN 0888-5885
- Country of Publication:
- United States
- Language:
- English
Similar Records
Carbon dioxide separation using adsorption with steam regeneration
Comparison of activated carbon and zeolite 13X for CO[sub 2] recovery from flue gas by pressure swing adsorption