Evaluating Derivatives
|
book
|
January 2008 |
Design of fracture resistant energy absorbing structures using elastoplastic topology optimization
|
journal
|
June 2017 |
Design of energy dissipating elastoplastic structures under cyclic loads using topology optimization
|
journal
|
April 2017 |
Closed-form matrix exponential and its application in finite-strain plasticity: CLOSED-FORM MATRIX EXPONENTIAL AND FINITE-STRAIN PLASTICITY
|
journal
|
March 2014 |
The Virtual Fields Method for Extracting Constitutive Parameters From Full-Field Measurements: a Review
|
journal
|
November 2006 |
Fast Bayesian optimal experimental design for seismic source inversion
|
journal
|
July 2015 |
Parameter covariance and non-uniqueness in material model calibration using the Virtual Fields Method
|
journal
|
September 2018 |
Aerodynamic-driven topology optimization of compliant airfoils
|
journal
|
May 2020 |
A continuum Lagrangian sensitivity analysis for metal forming processes with applications to die design problems
|
journal
|
June 2000 |
A GPU Accelerated Adjoint Solver for Shape Optimization
|
conference
|
June 2018 |
Digital volume correlation: Three-dimensional strain mapping using X-ray tomography
|
journal
|
September 1999 |
A 10-node composite tetrahedral finite element for solid mechanics: COMPOSITE TETRAHEDRAL FINITE ELEMENT
|
journal
|
February 2016 |
Topology optimization of turbulent flows
|
journal
|
April 2018 |
Integrated digital image correlation applied to elastoplastic identification in a biaxial experiment
|
journal
|
February 2016 |
An updated Lagrangian finite element sensitivity analysis of large deformations using quadrilateral elements
|
journal
|
December 2001 |
Efficient adjoint sensitivity analysis of isotropic hardening elastoplasticity via load steps reduction approximation
|
journal
|
October 2017 |
Shape optimization and preform design in metal forming processes
|
journal
|
December 2000 |
Investigation of assumptions and approximations in the virtual fields method for a viscoplastic material model
|
journal
|
February 2019 |
Bi-material topology optimization for energy dissipation with inertia and material rate effects under finite deformations
|
journal
|
October 2019 |
Applications of automatic differentiation in topology optimization
|
journal
|
May 2017 |
On the identifiability of Hill-1948 plasticity model with a single biaxial test on very thin sheet: On the identifiability of Hill-1948 plasticity model
|
journal
|
June 2017 |
Topology optimization of structures with anisotropic plastic materials using enhanced assumed strain elements
|
journal
|
December 2016 |
Digital Volume Correlation: Review of Progress and Challenges
|
journal
|
June 2018 |
Towards efficient backward-in-time adjoint computations using data compression techniques
|
journal
|
May 2015 |
Validation of finite‐element models using full‐field experimental data: Levelling finite‐element analysis data through a digital image correlation engine
|
journal
|
April 2020 |
Design of microstructure-sensitive properties in elasto-viscoplastic polycrystals using multi-scale homogenization
|
journal
|
October 2006 |
Toward 4D mechanical correlation
|
journal
|
May 2016 |
Adjoint Lattice Boltzmann for topology optimization on multi-GPU architecture
|
journal
|
February 2016 |
Inverse Yield Locus Identification of Sheet Metal Using a Complex Cruciform in Biaxial Tension and Digital Image Correlation
- Coppieters, Sam; Hakoyama, Tomoyuki; Debruyne, Dimitri
-
The International Conference on Experimental Mechanics, The 18th International Conference on Experimental Mechanics
https://doi.org/10.3390/ICEM18-05208
|
conference
|
May 2018 |
A continuum sensitivity method for finite thermo-inelastic deformations with applications to the design of hot forming processes
- Ganapathysubramanian, Shankar; Zabaras, Nicholas
-
International Journal for Numerical Methods in Engineering, Vol. 55, Issue 12
https://doi.org/10.1002/nme.543
|
journal
|
January 2002 |
Calibration of anisotropic plasticity models using a biaxial test and the virtual fields method
|
journal
|
November 2019 |
Comparison of Local and Global Approaches to Digital Image Correlation
|
journal
|
March 2012 |
Failure resistant topology optimization of structures using nonlocal elastoplastic-damage model
|
journal
|
April 2018 |
Automatic differentiation for stress and consistent tangent computation
|
journal
|
November 2014 |
A unified framework for nonlinear path-dependent sensitivity analysis in topology optimization
|
journal
|
March 2018 |
Optimized bi-material layouts for energy dissipating composites under finite deformations
|
journal
|
June 2020 |
Topology optimization for designing periodic microstructures based on finite strain viscoplasticity
|
journal
|
May 2020 |
Aspects on the finite-element implementation of the Gurson model including parameter identification
|
journal
|
January 1999 |
Camera System Resolution and its Influence on Digital Image Correlation
|
journal
|
September 2014 |
Effect of Fragile Speckle Patterns on Accuracy of Digital Volume Correlation
|
journal
|
April 2019 |
Topology optimization for effective energy propagation in rate-independent elastoplastic material systems
|
journal
|
October 2015 |
Application of the virtual fields method to large strain anisotropic plasticity
|
journal
|
October 2016 |
Anisotropic plasticity model forms for extruded Al 7079: Part II, validation
|
journal
|
March 2021 |
A continuum sensitivity method for the design of multi-stage metal forming processes
|
journal
|
February 2003 |
Computational design of deformation processes for materials with ductile damage
|
journal
|
January 2003 |
Simulation of finite-strain inelastic phenomena governed by creep and plasticity
|
journal
|
November 2017 |
Topology optimization approaches: A comparative review
|
journal
|
August 2013 |
Topology optimization of finite strain viscoplastic systems under transient loads: Transient finite strain viscoplastic effects in topology optimization
- Ivarsson, Niklas; Wallin, Mathias; Tortorelli, Daniel
-
International Journal for Numerical Methods in Engineering, Vol. 114, Issue 13
https://doi.org/10.1002/nme.5789
|
journal
|
March 2018 |
A phase-field formulation for fracture in ductile materials: Finite deformation balance law derivation, plastic degradation, and stress triaxiality effects
|
journal
|
December 2016 |
A proper orthogonal decomposition approach to microstructure model reduction in Rodrigues space with applications to optimal control of microstructure-sensitive properties
|
journal
|
October 2003 |
Strength-based topology optimization for anisotropic parts
|
journal
|
January 2018 |
A Newton–Schur alternative to the consistent tangent approach in computational plasticity
|
journal
|
January 2007 |
Higher order stabilized finite element method for hyperelastic finite deformation
|
journal
|
January 2002 |
Design across length scales: a reduced-order model of polycrystal plasticity for the control of microstructure-sensitive material properties
|
journal
|
November 2004 |
Topology optimization of pressure dependent elastoplastic energy absorbing structures with material damage constraints
|
journal
|
October 2017 |
Efficient Expression Templates for Operator Overloading-Based Automatic Differentiation
|
book
|
January 2012 |
Simultaneous full-field multi-experiment identification
|
journal
|
June 2019 |
A theory of the yielding and plastic flow of anisotropic metals
|
journal
|
May 1948 |
Estimation of Elastoplastic Parameters via Weighted FEMU and Integrated-DIC
|
journal
|
May 2014 |
Topology optimization based on finite strain plasticity
|
journal
|
April 2016 |
Topology optimization of energy absorbing structures with maximum damage constraint: TOPOLOGY OPTIMIZATION INELASTIC DAMAGE
|
journal
|
March 2017 |
Identification of sheet metal plastic anisotropy using heterogeneous biaxial tensile tests
|
journal
|
April 2010 |
Identification of plastic constitutive parameters at large deformations from three dimensional displacement fields
|
journal
|
July 2011 |
The continuum sensitivity method for the computational design of three-dimensional deformation processes
|
journal
|
October 2006 |
Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements
|
journal
|
July 2008 |
A stabilized mixed finite element method for finite elasticity.
|
journal
|
November 1999 |
Stabilized finite element formulation for elastic–plastic finite deformations
|
journal
|
February 2005 |
A comprehensive study of a multiplicative elastoplasticity model coupled to damage including parameter identification
|
journal
|
January 2000 |
Automating Embedded Analysis Capabilities and Managing Software Complexity in Multiphysics Simulation, Part I: Template-Based Generic Programming
|
journal
|
January 2012 |
Parameter identification for finite deformation elasto-plasticity in principal directions
|
journal
|
July 1997 |
Methods and applications of digital volume correlation
|
journal
|
August 2008 |
Automating Embedded Analysis Capabilities and Managing Software Complexity in Multiphysics Simulation, Part II: Application to Partial Differential Equations
|
journal
|
January 2012 |
Big Data in Experimental Mechanics and Model Order Reduction: Today’s Challenges and Tomorrow’s Opportunities
|
journal
|
July 2017 |
Comparison of the identification performance of conventional FEM updating and integrated DIC: COMPARISON OF THE PERFORMANCE OF FEMU AND IDIC
- Ruybalid, Andre P.; Hoefnagels, Johan P. M.; van der Sluis, Olaf
-
International Journal for Numerical Methods in Engineering, Vol. 106, Issue 4
https://doi.org/10.1002/nme.5127
|
journal
|
October 2015 |
On the synergy between texture classification and deformation process sequence selection for the control of texture-dependent properties
|
journal
|
February 2005 |
Semi-analytical sensitivity analysis for nonlinear transient problems
|
journal
|
September 2018 |
Tangent operators and design sensitivity formulations for transient non-linear coupled problems with applications to elastoplasticity
|
journal
|
July 1994 |
Stress-constrained continuum topology optimization: a new approach based on elasto-plasticity
|
journal
|
November 2016 |
Deformation process design for control of microstructure in the presence of dynamic recrystallization and grain growth mechanisms
|
journal
|
April 2004 |
Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review
|
journal
|
May 2006 |
Density based topology optimization of turbulent flow heat transfer systems
|
journal
|
March 2018 |
The Virtual Fields Method for Extracting Constitutive Parameters From Full-Field Measurements: a Review
|
journal
|
November 2006 |
Automation of primal and sensitivity analysis of transient coupled problems
|
journal
|
May 2009 |
Theoretical, numerical and identification aspects of a new model class for ductile damage
|
journal
|
July 2002 |
Algorithm 778: L-BFGS-B: Fortran subroutines for large-scale bound-constrained optimization
|
journal
|
December 1997 |
Improving full-field identification using progressive model enrichments
|
journal
|
July 2017 |
On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage
|
journal
|
November 2018 |
Anisotropic yield surface identification of sheet metal through stereo finite element model updating
|
journal
|
September 2016 |
Adjoint-based error estimation and mesh adaptation for stabilized finite deformation elasticity
|
journal
|
August 2018 |
A multi-length scale sensitivity analysis for the control of texture-dependent properties in deformation processing
|
journal
|
September 2008 |
Design of periodic elastoplastic energy dissipating microstructures
|
journal
|
September 2018 |
Current and future trends in topology optimization for additive manufacturing
|
journal
|
May 2018 |
The method of moving asymptotes—a new method for structural optimization
|
journal
|
February 1987 |
Anisotropic finite elastoplasticity with nonlinear kinematic and isotropic hardening and application to sheet metal forming
|
journal
|
May 2010 |
Experimental Validation of the Sensitivity-Based Virtual Fields for Identification of Anisotropic Plasticity Models
|
journal
|
February 2020 |
A sensitivity analysis for the optimal design of metal-forming processes
|
journal
|
February 1996 |