Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper

Efe, Mert; Gwalani, Bharat; Tao, Jinhui; Song, Miao; Kaspar, Tiffany C.; Devaraj, Arun; Rohatgi, Aashish

doi:10.1016/j.apsusc.2021.150132

Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper

Journal Article · Fri Oct 01 00:00:00 EDT 2021 · Applied Surface Science

DOI:https://doi.org/10.1016/j.apsusc.2021.150132· OSTI ID:1828480

Efe, Mert; Gwalani, Bharat; Tao, Jinhui; Song, Miao; Kaspar, Tiffany C.; Devaraj, Arun; Rohatgi, Aashish

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 1828480

Alternate ID(s):: OSTI ID: 1811288

Journal Information:: Applied Surface Science, Journal Name: Applied Surface Science Journal Issue: C Vol. 562; ISSN 0169-4332

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (43)

The friction of diamond sliding on diamond Samuels, B.; Wilks, J. Journal of Materials Science, Vol. 23, Issue 8 https://doi.org/10.1007/BF00547459	journal	August 1988
The effect of stacking fault energy on the microstructural development during room temperature wire drawing in Cu, Al and their dilute alloys Varma, S. K.; Caballero, V.; Ponce, J. Journal of Materials Science, Vol. 31, Issue 21 https://doi.org/10.1007/BF01160807	journal	November 1996
The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery Rohatgi, Aashish; Vecchio, Kenneth S.; Gray, George T. Metallurgical and Materials Transactions A, Vol. 32, Issue 1 https://doi.org/10.1007/s11661-001-0109-7	journal	January 2001
Building on Gleiter: The Foundations and Future of Deformation Processing of Nanocrystalline Metals Mathaudhu, Suveen N. Metallurgical and Materials Transactions A, Vol. 51, Issue 12 https://doi.org/10.1007/s11661-020-06031-5	journal	October 2020
Twinning in copper deformed at high strain rates Cronje, S.; Kroon, R. E.; Roos, W. D. Bulletin of Materials Science, Vol. 36, Issue 1 https://doi.org/10.1007/s12034-013-0445-4	journal	February 2013
Deformation and recovery of [001] oriented copper crystals Van Drunen, G.; Saimoto, S. Acta Metallurgica, Vol. 19, Issue 3 https://doi.org/10.1016/0001-6160(71)90148-9	journal	March 1971
Deformation behaviour of copper in ultramicrotomy Stobbs, W. M.; Kallend, J. S.; Williams, J. A. Acta Metallurgica, Vol. 24, Issue 12 https://doi.org/10.1016/0001-6160(76)90025-0	journal	December 1976
Extusion-cutting De Chiffre, L. International Journal of Machine Tool Design and Research, Vol. 16, Issue 2 https://doi.org/10.1016/0020-7357(76)90032-9	journal	January 1976
Formation of white-etching layers on rail treads Baumann, G.; Fecht, H. J.; Liebelt, S. Wear, Vol. 191, Issue 1-2 https://doi.org/10.1016/0043-1648(95)06733-7	journal	January 1996
Molecular Dynamics Analysis as Compared with Experimental Results of Micromachining Shimada, Shoichi; Ikawa, Naoya CIRP Annals, Vol. 41, Issue 1 https://doi.org/10.1016/S0007-8506(07)61165-2	journal	January 1992
Aspects of Surface Generation in Orthogonal Ultraprecision Machining Lucca, D. A.; Seo, Y. W.; Rhorer, R. L. CIRP Annals, Vol. 43, Issue 1 https://doi.org/10.1016/S0007-8506(07)62160-X	journal	January 1994
Nano- to microscale wear and mechanical characterization using scanning probe microscopy Bhushan, Bharat Wear, Vol. 251, Issue 1-12 https://doi.org/10.1016/S0043-1648(01)00804-3	journal	October 2001
Towards a deeper understanding of wear and friction on the atomic scale—a molecular dynamics analysis Zhang, Liangchi; Tanaka, Hiroaki Wear, Vol. 211, Issue 1 https://doi.org/10.1016/S0043-1648(97)00073-2	journal	October 1997
Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach Komanduri, R.; Chandrasekaran, N.; Raff, L. M. Wear, Vol. 219, Issue 1 https://doi.org/10.1016/S0043-1648(98)00229-4	journal	August 1998
A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper Brown, Travis L.; Saldana, Christopher; Murthy, Tejas G. Acta Materialia, Vol. 57, Issue 18 https://doi.org/10.1016/j.actamat.2009.07.052	journal	October 2009
Controlling deformation and microstructure on machined surfaces Guo, Yang; Saldana, Christopher; Dale Compton, W. Acta Materialia, Vol. 59, Issue 11 https://doi.org/10.1016/j.actamat.2011.03.076	journal	June 2011
Scratching the surface: Elastic rotations beneath nanoscratch and nanoindentation tests Kareer, Anna; Tarleton, Edmund; Hardie, Christopher Acta Materialia, Vol. 200 https://doi.org/10.1016/j.actamat.2020.08.051	journal	November 2020
Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process Zhang, J. J.; Sun, T.; Yan, Y. D. Applied Surface Science, Vol. 254, Issue 15 https://doi.org/10.1016/j.apsusc.2008.01.096	journal	May 2008
Scratch direction and threshold force in nanoscale scratching using atomic force microscopes Tseng, Ampere A.; Kuo, Chung-Feng Jeffrey; Jou, Shyankay Applied Surface Science, Vol. 257, Issue 22 https://doi.org/10.1016/j.apsusc.2011.04.065	journal	September 2011
Orientation dependence of subsurface deformation in dry sliding wear of Cu single crystals Tarasov, S. Yu.; Lychagin, D. V.; Chumaevskii, A. V. Applied Surface Science, Vol. 274 https://doi.org/10.1016/j.apsusc.2013.02.018	journal	June 2013
Evolution of plasticity in nanometric cutting of Fe single crystals Gao, Yu; Urbassek, Herbert M. Applied Surface Science, Vol. 317 https://doi.org/10.1016/j.apsusc.2014.08.020	journal	October 2014
Subsurface defects structural evolution in nano-cutting of single crystal copper Wang, Quanlong; Bai, Qingshun; Chen, Jiaxuan Applied Surface Science, Vol. 344 https://doi.org/10.1016/j.apsusc.2015.03.061	journal	July 2015
Recent Advances in Mechanical Micromachining Dornfeld, D.; Min, S.; Takeuchi, Y. CIRP Annals, Vol. 55, Issue 2 https://doi.org/10.1016/j.cirp.2006.10.006	journal	January 2006
Size effect and friction in cutting of metals on the small scale Feng, Gan; Sagapuram, Dinakar CIRP Annals, Vol. 69, Issue 1 https://doi.org/10.1016/j.cirp.2020.04.029	journal	January 2020
Nanometric cutting of copper: A molecular dynamics study Pei, Q. X.; Lu, C.; Fang, F. Z. Computational Materials Science, Vol. 37, Issue 4 https://doi.org/10.1016/j.commatsci.2005.10.006	journal	October 2006
Machining induced surface integrity in titanium and nickel alloys: A review Ulutan, Durul; Ozel, Tugrul International Journal of Machine Tools and Manufacture, Vol. 51, Issue 3 https://doi.org/10.1016/j.ijmachtools.2010.11.003	journal	March 2011
Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing Miyamoto, H.; Fushimi, J.; Mimaki, T. Materials Science and Engineering: A, Vol. 405, Issue 1-2 https://doi.org/10.1016/j.msea.2005.05.091	journal	September 2005
Homogenization and texture development in rapidly solidified AZ91E consolidated by Shear Assisted Processing and Extrusion (ShAPE) Overman, N. R.; Whalen, S. A.; Bowden, M. E. Materials Science and Engineering: A, Vol. 701 https://doi.org/10.1016/j.msea.2017.06.062	journal	July 2017
Friction stir welding and processing Mishra, R. S.; Ma, Z. Y. Materials Science and Engineering: R: Reports, Vol. 50, Issue 1-2 https://doi.org/10.1016/j.mser.2005.07.001	journal	August 2005
Fabrication of a gradient nano-micro-structured surface layer on bulk copper by means of a surface mechanical grinding treatment Li, W. L.; Tao, N. R.; Lu, K. Scripta Materialia, Vol. 59, Issue 5 https://doi.org/10.1016/j.scriptamat.2008.05.003	journal	September 2008
Subsurface microstructure evolution and deformation mechanism of Ag–Cu eutectic alloy after dry sliding wear Cai, W.; Bellon, P. Wear, Vol. 303, Issue 1-2 https://doi.org/10.1016/j.wear.2013.04.006	journal	June 2013
Mixing instabilities during shearing of metals Pouryazdan, Mohsen; Kaus, Boris J. P.; Rack, Alexander Nature Communications, Vol. 8, Issue 1 https://doi.org/10.1038/s41467-017-01879-5	journal	November 2017
Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip Merchant, M. Eugene Journal of Applied Physics, Vol. 16, Issue 5 https://doi.org/10.1063/1.1707586	journal	May 1945
Energetic basis for the molecular-scale organization of bone Tao, Jinhui; Battle, Keith C.; Pan, Haihua Proceedings of the National Academy of Sciences, Vol. 112, Issue 2 https://doi.org/10.1073/pnas.1404481112	journal	December 2014
Some aspects of machining with negative-rake tools simulating grinding: A molecular dynamics simulation approach Komanduri, R.; Chandrasekaran, N.; Raff, L. M. Philosophical Magazine B, Vol. 79, Issue 7 https://doi.org/10.1080/13642819908214852	journal	July 1999
Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu–Zn alloys Ma, X. L.; Xu, W. Z.; Zhou, H. Philosophical Magazine, Vol. 95, Issue 3 https://doi.org/10.1080/14786435.2014.1000418	journal	January 2015
Stacking fault energy and microstructure effects on torsion texture evolution Hughes, Darcy A.; Lebensohn, Ricardo A.; Wenk, Hans Rudolf Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 456, Issue 1996 https://doi.org/10.1098/rspa.2000.0543	journal	April 2000
Nonequilibrium Roughening of Interfaces in Crystals under Shear: Application to Ball Milling Bellon, P.; Averback, R. S. Physical Review Letters, Vol. 74, Issue 10 https://doi.org/10.1103/PhysRevLett.74.1819	journal	March 1995
A New Analytical Model for Estimation of Scratch-Induced Damage in Brittle Solids Jing, Xiaoning; Maiti, Spandan; Subhash, Ghatu Journal of the American Ceramic Society, Vol. 90, Issue 3 https://doi.org/10.1111/j.1551-2916.2006.01471.x	journal	March 2007
A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool Manjunathaiah, Jairam; Endres, William J. Journal of Manufacturing Science and Engineering, Vol. 122, Issue 3 https://doi.org/10.1115/1.1285886	journal	September 1999
New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting Albrecht, P. Journal of Engineering for Industry, Vol. 82, Issue 4 https://doi.org/10.1115/1.3664242	journal	November 1960
Nanofabrication by scanning probe microscope lithography: A review Tseng, Ampere A.; Notargiacomo, Andrea; Chen, T. P. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, Vol. 23, Issue 3 https://doi.org/10.1116/1.1926293	journal	January 2005
Wear and mechanical characterisation on micro- to picoscales using AFM Bhushan, B. International Materials Reviews, Vol. 44, Issue 3 https://doi.org/10.1179/095066099101528243	journal	March 1999

Similar Records

Nanomechanical Scratching Induced Local Shear Deformation and Microstructural Evolution in Single Crystalline Copper

Journal Article · Fri Oct 01 00:00:00 EDT 2021 · Applied Surface Science · OSTI ID:1811288

Alloying effects on deformation induced microstructure evolution in copper

Journal Article · Sat Oct 12 20:00:00 EDT 2024 · Scientific Reports · OSTI ID:2570757

Microstructure evolution and strain localization during shear deformation of an aluminum alloy

Journal Article · Tue Oct 01 00:00:00 EDT 1996 · Acta Materialia · OSTI ID:415411

Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper

Citation Formats

References (43)

Similar Records

Related Subjects