Hydrogen embrittlement of additively manufactured austenitic stainless steel 316&nbsp;L

Bertsch, K. M.; Nagao, A.; Rankouhi, B.; Kuehl, B.; Thoma, D. J.

doi:10.1016/j.corsci.2021.109790

Hydrogen embrittlement of additively manufactured austenitic stainless steel 316 L

Journal Article · Wed Sep 01 00:00:00 EDT 2021 · Corrosion Science

DOI:https://doi.org/10.1016/j.corsci.2021.109790· OSTI ID:1828176

Bertsch, K. M. ^[1]; Nagao, A. ^[2]; Rankouhi, B. ^[3]; Kuehl, B. ^[3]; Thoma, D. J. ^[3]

Univ. of Wisconsin, Madison, WI (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); University of Wisconsin-Madison
Kyushu Univ., Fukuoka (Japan)
Univ. of Wisconsin, Madison, WI (United States)

Additive manufacturing (AM) is a promising means of production of austenitic stainless steel (SS) parts for hydrogen service. The hydrogen embrittlement resistance of SS 316 L parts manufactured by powder-bed-fed selective laser melting (SLM) and directed energy deposition (DED) was examined using slow strain rate tensile testing. The influence of the hierarchical AM microstructures on mechanical response, microstructural evolution, and void formation were analyzed using multiscale electron microscopy. Furthermore, the presence of hydrogen reduced ductility in as-built DED materials, but did not significantly influence the response in as-built SLM material or heat-treated materials. Microstructural features driving these different responses are discussed.

View Accepted Manuscript (DOE)

Research Organization:: Georgia Inst. of Technology, Atlanta, GA (United States); Georgia Tech Research Corporation, Atlanta, GA (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003921; AC52-07NA27344

OSTI ID:: 1828176

Alternate ID(s):: OSTI ID: 1833209
OSTI ID: 1842687

Journal Information:: Corrosion Science, Journal Name: Corrosion Science Vol. 192; ISSN 0010-938X

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (96)

A TEM investigation of hydrogen-induced deformation twinning and associated martensitic phases in 304-type stainless steel Rigsbee, J. M.; Benson, R. B. Journal of Materials Science, Vol. 12, Issue 2 https://doi.org/10.1007/BF00566284	journal	February 1977
Stacking fault energies of seven commercial austenitic stainless steels Schramm, R. E.; Reed, R. P. Metallurgical Transactions A, Vol. 6, Issue 7 https://doi.org/10.1007/BF02641927	journal	July 1975
Evidence for Dislocation Transport of Hydrogen in Aluminum Albrecht, J.; Bernstein, I. M.; Thompson, Anthony W. Metallurgical Transactions A, Vol. 13, Issue 5 https://doi.org/10.1007/BF02642394	journal	May 1982
Effect of weld composition and microstructure on hydrogen assisted fracture of austenitic stainless steels Brooks, J. A.; West, A. J.; Thompson, A. W. Metallurgical Transactions A, Vol. 14, Issue 1 https://doi.org/10.1007/BF02643740	journal	January 1983
Hydrogen-enhanced localization of plasticity in an austenitic stainless steel Abraham, Daniel P.; Altstetter, Carl J. Metallurgical and Materials Transactions A, Vol. 26, Issue 11 https://doi.org/10.1007/BF02669644	journal	November 1995
Dislocation transport and hydrogen embrittlement West, Anton J.; Louthan, MacIntyre R. Metallurgical Transactions A, Vol. 10, Issue 11 https://doi.org/10.1007/BF02811700	journal	November 1979
Understanding Mechanisms and Kinetics of Environmentally Assisted Cracking Lynch, Stan BHM Berg- und Hüttenmännische Monatshefte, Vol. 161, Issue 1 https://doi.org/10.1007/s00501-016-0448-8	journal	January 2016
Hydrogen thermal desorption relevant to delayed-fracture susceptibility of high-strength steels Nagumo, M.; Nakamura, M.; Takai, K. Metallurgical and Materials Transactions A, Vol. 32, Issue 2 https://doi.org/10.1007/s11661-001-0265-9	journal	February 2001
Hydrogen Embrittlement Susceptibility of Fe-Mn Binary Alloys with High Mn Content: Effects of Stable and Metastable ε-Martensite, and Mn Concentration Koyama, Motomichi; Okazaki, Shota; Sawaguchi, Takahiro Metallurgical and Materials Transactions A, Vol. 47, Issue 6 https://doi.org/10.1007/s11661-016-3431-9	journal	March 2016
Interrogating the Effects of Hydrogen on the Behavior of Planar Deformation Bands in Austenitic Stainless Steel Sabisch, J. E. C.; Sugar, J. D.; Ronevich, J. Metallurgical and Materials Transactions A, Vol. 52, Issue 4 https://doi.org/10.1007/s11661-021-06170-3	journal	February 2021
Hydrogen Embrittlement Understood Robertson, Ian M.; Sofronis, P.; Nagao, A. Metallurgical and Materials Transactions B, Vol. 46, Issue 3 https://doi.org/10.1007/s11663-015-0325-y	journal	March 2015
Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel Smith, Thale R.; Sugar, Joshua D.; Schoenung, Julie M. JOM, Vol. 70, Issue 3 https://doi.org/10.1007/s11837-017-2711-1	journal	January 2018
The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700°C Staker, M. R.; Holt, D. L. Acta Metallurgica, Vol. 20, Issue 4 https://doi.org/10.1016/0001-6160(72)90012-0	journal	April 1972
A model of ductile fracture based on the nucleation and growth of voids Le Roy, G.; Embury, J. D.; Edwards, G. Acta Metallurgica, Vol. 29, Issue 8 https://doi.org/10.1016/0001-6160(81)90185-1	journal	August 1981
Hydrogen induced grain boundary fracture in high purity nickel and its alloys—Enhanced hydrogen diffusion along grain boundaries Kimura, A.; Birnbaum, H. K. Acta Metallurgica, Vol. 36, Issue 3 https://doi.org/10.1016/0001-6160(88)90109-5	journal	March 1988
Hydrogen transport in austenitic stainless steel Louthan, M. R.; Derrick, R. G. Corrosion Science, Vol. 15, Issue 6-12 https://doi.org/10.1016/0010-938X(75)90022-0	journal	January 1975
The effect of pre-straining and δ-ferrite on the embrittlement of 304L stainless steel by hydrogen Buckley, J. R.; Hardie, D. Corrosion Science, Vol. 34, Issue 1 https://doi.org/10.1016/0010-938X(93)90261-E	journal	January 1993
Hydrogen embrittlement of metals Louthan, M. R.; Caskey, G. R.; Donovan, J. A. Materials Science and Engineering, Vol. 10 https://doi.org/10.1016/0025-5416(72)90109-7	journal	January 1972
On the thermo-mechanical behavior and hydrogen compatibility of 22-13-5 stainles steel Odegard, B. C.; West, A. J. Materials Science and Engineering, Vol. 19, Issue 2 https://doi.org/10.1016/0025-5416(75)90113-5	journal	June 1975
Void initiation in ductile fracture Bauer, R. W.; Wilsdorf, H. G. F. Scripta Metallurgica, Vol. 7, Issue 11 https://doi.org/10.1016/0036-9748(73)90250-0	journal	November 1973
The effect of plastic deformation on the transport of hydrogen in nickel Kurkela, M.; Latanision, R. M. Scripta Metallurgica, Vol. 13, Issue 10 https://doi.org/10.1016/0036-9748(79)90322-3	journal	October 1979
Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture Birnbaum, H. K.; Sofronis, P. Materials Science and Engineering: A, Vol. 176, Issue 1-2 https://doi.org/10.1016/0921-5093(94)90975-X	journal	March 1994
HVEM studies of the effects of hydrogen on the deformation and fracture of AISI type 316 austenitic stainless steel Rozenak, P.; Robertson, I. M.; Birnbaum, H. K. Acta Metallurgica et Materialia, Vol. 38, Issue 11 https://doi.org/10.1016/0956-7151(90)90070-W	journal	November 1990
Hydrogen-induced strain localization and failure of austenitic stainless steels at high hydrogen concentrations Ulmer, D. G.; Altstetter, C. J. Acta Metallurgica et Materialia, Vol. 39, Issue 6 https://doi.org/10.1016/0956-7151(91)90211-I	journal	June 1991
The effect of hydrogen on dislocation dynamics Robertson, I. M. Engineering Fracture Mechanics, Vol. 68, Issue 6 https://doi.org/10.1016/S0013-7944(01)00011-X	journal	April 2001
Ductile Fracture by Void Growth to Coalescence Benzerga, A. Amine; Leblond, Jean-Baptiste Advances in Applied Mechanics https://doi.org/10.1016/S0065-2156(10)44003-X	book	January 2010
The onset of twinning in metals: a constitutive description Meyers, M. A.; Vöhringer, O.; Lubarda, V. A. Acta Materialia, Vol. 49, Issue 19 https://doi.org/10.1016/S1359-6454(01)00300-7	journal	November 2001
Hydrogen effects on the character of dislocations in high-purity aluminum Ferreira, P. J.; Robertson, I. M.; Birnbaum, H. K. Acta Materialia, Vol. 47, Issue 10 https://doi.org/10.1016/S1359-6454(99)00156-1	journal	August 1999
Hydrogen effects on dislocation activity in austenitic stainless steel Nibur, K.; Bahr, D.; Somerday, B. Acta Materialia, Vol. 54, Issue 10 https://doi.org/10.1016/j.actamat.2006.02.007	journal	June 2006
Alloying effects on the stacking fault energy in austenitic stainless steels from first-principles theory Vitos, L.; Nilsson, J. -O.; Johansson, B. Acta Materialia, Vol. 54, Issue 14 https://doi.org/10.1016/j.actamat.2006.04.013	journal	August 2006
Predicting twinning stress in fcc metals: Linking twin-energy pathways to twin nucleation Kibey, S.; Liu, J. B.; Johnson, D. D. Acta Materialia, Vol. 55, Issue 20 https://doi.org/10.1016/j.actamat.2007.08.042	journal	December 2007
Slip systems extracted from lattice rotations and dislocation structures Winther, Grethe Acta Materialia, Vol. 56, Issue 9 https://doi.org/10.1016/j.actamat.2007.12.026	journal	May 2008
The role of localized deformation in hydrogen-assisted crack propagation in 21Cr–6Ni–9Mn stainless steel Nibur, K. A.; Somerday, B. P.; Balch, D. K. Acta Materialia, Vol. 57, Issue 13 https://doi.org/10.1016/j.actamat.2009.04.027	journal	August 2009
On the formation and nature of quasi-cleavage fracture surfaces in hydrogen embrittled steels Martin, May L.; Fenske, Jamey A.; Liu, Grace S. Acta Materialia, Vol. 59, Issue 4 https://doi.org/10.1016/j.actamat.2010.11.024	journal	February 2011
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels Landron, C.; Maire, E.; Bouaziz, O. Acta Materialia, Vol. 59, Issue 20 https://doi.org/10.1016/j.actamat.2011.08.046	journal	December 2011
Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging Koyama, Motomichi; Akiyama, Eiji; Tsuzaki, Kaneaki Acta Materialia, Vol. 61, Issue 12 https://doi.org/10.1016/j.actamat.2013.04.030	journal	July 2013
Hydrogen-induced intergranular failure of iron Wang, Shuai; Martin, May L.; Sofronis, Petros Acta Materialia, Vol. 69 https://doi.org/10.1016/j.actamat.2014.01.060	journal	May 2014
The effect of nanosized (Ti,Mo)C precipitates on hydrogen embrittlement of tempered lath martensitic steel Nagao, Akihide; Martin, May L.; Dadfarnia, Mohsen Acta Materialia, Vol. 74 https://doi.org/10.1016/j.actamat.2014.04.051	journal	August 2014
Correlation between dislocation organization and slip bands: TEM and AFM investigations in hydrogen-containing nickel and nickel–chromium Girardin, G.; Huvier, C.; Delafosse, D. Acta Materialia, Vol. 91 https://doi.org/10.1016/j.actamat.2015.03.016	journal	June 2015
Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation Tarzimoghadam, Z.; Ponge, D.; Klöwer, J. Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.059	journal	April 2017
Influence of hydrogen on dislocation self-organization in Ni Wang, Shuai; Nagao, Akihide; Edalati, Kaveh Acta Materialia, Vol. 135 https://doi.org/10.1016/j.actamat.2017.05.073	journal	August 2017
Do voids nucleate at grain boundaries during ductile rupture? Noell, Philip; Carroll, Jay; Hattar, Khalid Acta Materialia, Vol. 137 https://doi.org/10.1016/j.actamat.2017.07.004	journal	September 2017
Hydrogen embrittlement of the equi-molar FeNiCoCr alloy Nygren, Kelly E.; Wang, Shuai; Bertsch, Kaila M. Acta Materialia, Vol. 157 https://doi.org/10.1016/j.actamat.2018.07.032	journal	September 2018
Strengthening mechanisms in directed energy deposited austenitic stainless steel Smith, Thale R.; Sugar, Joshua D.; San Marchi, Chris Acta Materialia, Vol. 164 https://doi.org/10.1016/j.actamat.2018.11.021	journal	February 2019
The predominant role of strain-induced vacancies in hydrogen embrittlement of steels: Overview Nagumo, Michihiko; Takai, Kenichi Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.12.013	journal	February 2019
Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials Martin, May L.; Dadfarnia, Mohsen; Nagao, Akihide Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.12.014	journal	February 2019
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L Bertsch, K. M.; Meric de Bellefon, G.; Kuehl, B. Acta Materialia, Vol. 199 https://doi.org/10.1016/j.actamat.2020.07.063	journal	October 2020
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion Voisin, Thomas; Forien, Jean-Baptiste; Perron, Aurelien Acta Materialia, Vol. 203 https://doi.org/10.1016/j.actamat.2020.11.018	journal	January 2021
Hydrogen uptake in 316L stainless steel: Consequences on the tensile properties Brass, A. -M.; Chêne, J. Corrosion Science, Vol. 48, Issue 10 https://doi.org/10.1016/j.corsci.2005.11.004	journal	October 2006
The effect of grain size and aging on hydrogen embrittlement of a maraging steel Tsay, L. W.; Lu, H. L.; Chen, C. Corrosion Science, Vol. 50, Issue 9 https://doi.org/10.1016/j.corsci.2008.06.044	journal	September 2008
Hydrogen-assisted quasi-cleavage fracture in a single crystalline type 316 austenitic stainless steel Koyama, Motomichi; Akiyama, Eiji; Sawaguchi, Takahiro Corrosion Science, Vol. 75 https://doi.org/10.1016/j.corsci.2013.06.018	journal	October 2013
Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Corrosion Science, Vol. 166 https://doi.org/10.1016/j.corsci.2019.108425	journal	April 2020
Effect of dislocation cell walls on hydrogen adsorption, hydrogen trapping and hydrogen embrittlement resistance Chen, Lin; Xiong, Xilin; Tao, Xuan Corrosion Science, Vol. 166 https://doi.org/10.1016/j.corsci.2020.108428	journal	April 2020
Hydrogen-enhanced compatibility constraint for intergranular failure in FCC FeNiCoCrMn high-entropy alloy Bertsch, K. M.; Nygren, K. E.; Wang, S. Corrosion Science, Vol. 184 https://doi.org/10.1016/j.corsci.2021.109407	journal	May 2021
Hydrogen embrittlement in compositionally complex FeNiCoCrMn FCC solid solution alloy Nygren, K. E.; Bertsch, K. M.; Wang, S. Current Opinion in Solid State and Materials Science, Vol. 22, Issue 1 https://doi.org/10.1016/j.cossms.2017.11.002	journal	February 2018
Criteria for determining hydrogen compatibility and the mechanisms for hydrogen-assisted, surface crack growth in austenitic stainless steels Matsuoka, Saburo; Yamabe, Junichiro; Matsunaga, Hisao Engineering Fracture Mechanics, Vol. 153 https://doi.org/10.1016/j.engfracmech.2015.12.023	journal	March 2016
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion Djukic, Milos B.; Bakic, Gordana M.; Sijacki Zeravcic, Vera Engineering Fracture Mechanics, Vol. 216 https://doi.org/10.1016/j.engfracmech.2019.106528	journal	July 2019
Effects of alloy composition and strain hardening on tensile fracture of hydrogen-precharged type 316 stainless steels Sanmarchi, C. International Journal of Hydrogen Energy, Vol. 33, Issue 2 https://doi.org/10.1016/j.ijhydene.2007.10.046	journal	January 2008
Influence of macro segregation on hydrogen environment embrittlement of SUS 316L stainless steel Michler, Thorsten; Lee, Yongwon; Gangloff, Richard P. International Journal of Hydrogen Energy, Vol. 34, Issue 7 https://doi.org/10.1016/j.ijhydene.2009.02.015	journal	April 2009
On the physical differences between tensile testing of type 304 and 316 austenitic stainless steels with internal hydrogen and in external hydrogen San Marchi, C.; Michler, T.; Nibur, K. A. International Journal of Hydrogen Energy, Vol. 35, Issue 18 https://doi.org/10.1016/j.ijhydene.2010.06.018	journal	September 2010
Hydrogen environment embrittlement of stable austenitic steels Michler, Thorsten; San Marchi, Chris; Naumann, Jörg International Journal of Hydrogen Energy, Vol. 37, Issue 21 https://doi.org/10.1016/j.ijhydene.2012.08.071	journal	November 2012
Influence of low temperature prestrain on hydrogen gas embrittlement of metastable austenitic stainless steels Zhang, Lin; Li, Zhiyuan; Zheng, Jinyang International Journal of Hydrogen Energy, Vol. 38, Issue 25 https://doi.org/10.1016/j.ijhydene.2013.01.011	journal	August 2013
Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods Zhang, Lin; Li, Zhiyuan; Zheng, Jinyang International Journal of Hydrogen Energy, Vol. 38, Issue 19 https://doi.org/10.1016/j.ijhydene.2013.01.198	journal	June 2013
Effects of hydrogen on tensile properties and fracture surface morphologies of Type 316L stainless steel Matsuo, Takashi; Yamabe, Junichiro; Matsuoka, Saburo International Journal of Hydrogen Energy, Vol. 39, Issue 7 https://doi.org/10.1016/j.ijhydene.2013.12.099	journal	February 2014
Hydrogen embrittlement of catholically hydrogen-precharged 304L austenitic stainless steel: Effect of plastic pre-strain Wang, Yanfei; Wang, Xiaowei; Gong, Jianming International Journal of Hydrogen Energy, Vol. 39, Issue 25 https://doi.org/10.1016/j.ijhydene.2014.04.122	journal	August 2014
Analysis of the strategies for bridging the gap towards the Hydrogen Economy Moliner, R.; Lázaro, M. J.; Suelves, I. International Journal of Hydrogen Energy, Vol. 41, Issue 43 https://doi.org/10.1016/j.ijhydene.2016.06.202	journal	November 2016
Overview of the DOE hydrogen safety, codes and standards program, part 3: Advances in research and development to enhance the scientific basis for hydrogen regulations, codes and standards San Marchi, C.; Hecht, E. S.; Ekoto, I. W. International Journal of Hydrogen Energy, Vol. 42, Issue 11 https://doi.org/10.1016/j.ijhydene.2016.07.014	journal	March 2017
Overview of hydrogen embrittlement in high-Mn steels Koyama, Motomichi; Akiyama, Eiji; Lee, Young-Kook International Journal of Hydrogen Energy, Vol. 42, Issue 17 https://doi.org/10.1016/j.ijhydene.2017.02.214	journal	April 2017
Effect of pre-strain on hydrogen embrittlement of metastable austenitic stainless steel under different hydrogen conditions Zhou, Chengshuang; Song, Yangyang; Shi, Qiaoying International Journal of Hydrogen Energy, Vol. 44, Issue 47 https://doi.org/10.1016/j.ijhydene.2019.08.046	journal	October 2019
Structural representation of additively manufactured 316L austenitic stainless steel Bronkhorst, C. A.; Mayeur, J. R.; Livescu, V. International Journal of Plasticity, Vol. 118 https://doi.org/10.1016/j.ijplas.2019.01.012	journal	July 2019
Hydrogen-enhanced-plasticity mediated decohesion for hydrogen-induced intergranular and “quasi-cleavage” fracture of lath martensitic steels Nagao, Akihide; Dadfarnia, Mohsen; Somerday, Brian P. Journal of the Mechanics and Physics of Solids, Vol. 112 https://doi.org/10.1016/j.jmps.2017.12.016	journal	March 2018
Influence of solidification structures on radiation-induced swelling in an additively-manufactured austenitic stainless steel Meric de Bellefon, G.; Bertsch, K. M.; Chancey, M. R. Journal of Nuclear Materials, Vol. 523 https://doi.org/10.1016/j.jnucmat.2019.06.012	journal	September 2019
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties Fayazfar, Haniyeh; Salarian, Mehrnaz; Rogalsky, Allan Materials & Design, Vol. 144 https://doi.org/10.1016/j.matdes.2018.02.018	journal	April 2018
Dislocation network in additive manufactured steel breaks strength–ductility trade-off Liu, Leifeng; Ding, Qingqing; Zhong, Yuan Materials Today, Vol. 21, Issue 4 https://doi.org/10.1016/j.mattod.2017.11.004	journal	May 2018
A dimensionless number for predicting universal processing parameter boundaries in metal powder bed additive manufacturing Rankouhi, Behzad; Agrawal, Ankur Kumar; Pfefferkorn, Frank E. Manufacturing Letters, Vol. 27 https://doi.org/10.1016/j.mfglet.2020.12.002	journal	January 2021
Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions Barbier, D.; Gey, N.; Allain, S. Materials Science and Engineering: A, Vol. 500, Issue 1-2 https://doi.org/10.1016/j.msea.2008.09.031	journal	January 2009
Microstructural properties controlling hydrogen environment embrittlement of cold worked 316 type austenitic stainless steels Michler, Thorsten; Naumann, Joerg; Hock, Martin Materials Science and Engineering: A, Vol. 628 https://doi.org/10.1016/j.msea.2015.01.054	journal	March 2015
Neutron diffraction measurements of residual stress in additively manufactured stainless steel Brown, D. W.; Bernardin, J. D.; Carpenter, J. S. Materials Science and Engineering: A, Vol. 678 https://doi.org/10.1016/j.msea.2016.09.086	journal	December 2016
Formation of strain-induced martensite in selective laser melting austenitic stainless steel Hong, Yuanjian; Zhou, Chengshuang; Zheng, Yuanyuan Materials Science and Engineering: A, Vol. 740-741 https://doi.org/10.1016/j.msea.2018.10.121	journal	January 2019
On the influence of grain size on the TWIP/TRIP-effect and texture development in high-manganese steels Sevsek, Simon; Brasche, Frederike; Molodov, Dmitri A. Materials Science and Engineering: A, Vol. 754 https://doi.org/10.1016/j.msea.2019.03.072	journal	April 2019
Hydrogen-induced compatibility constraints across grain boundaries drive intergranular failure of Ni Bertsch, K. M.; Wang, S.; Nagao, A. Materials Science and Engineering: A, Vol. 760 https://doi.org/10.1016/j.msea.2019.05.036	journal	July 2019
Experimental validation and microstructure characterization of topology optimized, additively manufactured SS316L components Rankouhi, B.; Bertsch, K. M.; Meric de Bellefon, G. Materials Science and Engineering: A, Vol. 776 https://doi.org/10.1016/j.msea.2020.139050	journal	March 2020
Additive manufacturing of metallic components – Process, structure and properties DebRoy, T.; Wei, H. L.; Zuback, J. S. Progress in Materials Science, Vol. 92 https://doi.org/10.1016/j.pmatsci.2017.10.001	journal	March 2018
Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service Baek, Seung-Wook; Song, Eun Ju; Kim, Jung Hyun Scripta Materialia, Vol. 130 https://doi.org/10.1016/j.scriptamat.2016.11.020	journal	March 2017
Signatures of the unique microstructure of additively manufactured steel observed via diffraction Pokharel, R.; Balogh, L.; Brown, D. W. Scripta Materialia, Vol. 155 https://doi.org/10.1016/j.scriptamat.2018.06.008	journal	October 2018
On the failure of surface damage to assess the hydrogen-enhanced deformation ahead of crack tip in a cyclically loaded austenitic stainless steel Wang, Shuai; Nygren, Kelly E.; Nagao, Akihide Scripta Materialia, Vol. 166 https://doi.org/10.1016/j.scriptamat.2019.03.010	journal	June 2019
Grain detection from 2d and 3d EBSD data—Specification of the MTEX algorithm Bachmann, Florian; Hielscher, Ralf; Schaeben, Helmut Ultramicroscopy, Vol. 111, Issue 12 https://doi.org/10.1016/j.ultramic.2011.08.002	journal	December 2011
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
Dislocation Cell Formation in Metals Holt, David L. Journal of Applied Physics, Vol. 41, Issue 8 https://doi.org/10.1063/1.1659399	journal	July 1970
Subgrain-controlled grain growth in the laser-melted 316 L promoting strength at high temperatures Saeidi, Kamran; Akhtar, Farid Royal Society Open Science, Vol. 5, Issue 5 https://doi.org/10.1098/rsos.172394	journal	May 2018
Hydrogen related failure of steels – a new aspect Nagumo, M. Materials Science and Technology, Vol. 20, Issue 8 https://doi.org/10.1179/026708304225019687	journal	August 2004
Failure Analysis of SUS316L Flexible Hose for Hydrogen Station and Fatigue Life Prediction Method [水素ステーション水素漏洩トラブルの解析とSUS316Lフレキシブルホースの疲労寿命予測] Murakami, Yukitaka; Kanezaki, Toshihiko; Fukushima, Yoshihiro Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 75, Issue 749 https://doi.org/10.1299/kikaia.75.93	journal	January 2009
The Effect of Pre-Strain on the Resistance to Hydrogen Embrittlement in 316L Austenitic Stainless Steel Park, Il-Jeong; Jung, Jae-Gil; Jo, Seo Yeon MATERIALS TRANSACTIONS, Vol. 55, Issue 6 https://doi.org/10.2320/matertrans.M2014036	journal	January 2014
Conformity between Mechanics and Microscopic Functions of Hydrogen in Failure Nagumo, Michihiko ISIJ International, Vol. 52, Issue 2 https://doi.org/10.2355/isijinternational.52.168	journal	January 2012
Corrosion of Additively Manufactured Alloys: A Review Sander, G.; Tan, J.; Balan, P. CORROSION, Vol. 74, Issue 12 https://doi.org/10.5006/2926	journal	October 2018
Corrosion of Additively Manufactured Stainless Steels—Process, Structure, Performance: A Review Schindelholz, Eric J.; Melia, Michael A.; Rodelas, Jeffrey M. Corrosion, Vol. 77, Issue 5 https://doi.org/10.5006/3741	journal	February 2021

Similar Records

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

Journal Article · Fri Aug 14 00:00:00 EDT 2020 · Acta Materialia · OSTI ID:1690234

Related Subjects

36 MATERIALS SCIENCE
Additive manufacturing
Dislocations
Hydrogen embrittlement
Stainless steel
Transmission electron microscopy

Hydrogen embrittlement of additively manufactured austenitic stainless steel 316 L

Citation Formats

References (96)

Similar Records

Related Subjects