Temperature-dependent constitutive modeling of a magnesium alloy ZEK100 sheet using crystal plasticity models combined with in situ high-energy X-ray diffraction experiment

Bong, Hyuk Jong; Hu, Xiaohua; Sun, Xin; Ren, Yang

doi:10.1016/j.jma.2021.09.007

Title: Temperature-dependent constitutive modeling of a magnesium alloy ZEK100 sheet using crystal plasticity models combined with in situ high-energy X-ray diffraction experiment

Journal Article · Sat Oct 01 00:00:00 EDT 2022 · Journal of Magnesium and Alloys

DOI:https://doi.org/10.1016/j.jma.2021.09.007· OSTI ID:1825195

; Hu, Xiaohua; Sun, Xin; Ren, Yang

A multiscale crystal plasticity model accounting for temperature-dependent mechanical behaviors without introducing a larger number of unknown parameters was developed. The model was implemented in elastic-plastic self-consistent (EPSC) and crystal plasticity finite element (CPFE) frameworks for grain-scale simulations. A computationally efficient EPSC model was first employed to estimate the critical resolved shear stress and hardening parameters of the slip and twin systems available in a hexagonal close-packed magnesium alloy, ZEK100. The constitutive parameters were thereafter refined using the CPFE. The crystal plasticity frameworks incorporated with the temperature-dependent constitutive model were used to predict stress–strain curves in macroscale and lattice strains in microscale at different testing temperatures up to 200 °C. In particular, the predictions by the crystal plasticity models were compared with the measured lattice strain data at the elevated temperatures by in situ high-energy X-ray diffraction, for the first time. The comparison in the multiscale improved the fidelity of the developed temperature-dependent constitutive model and validated the assumption with regard to the temperature dependency of available slip and twin systems in the magnesium alloy. Finally, this work provides a time-efficient and precise modeling scheme for magnesium alloys at elevated temperatures.

View Journal Article

Cite

Export

Save

Research Organization:: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Energy Efficiency and Renewable Energy (EERE)

Grant/Contract Number:: AC02-06CH11357; AC05-00OR22725

OSTI ID:: 1825195

Alternate ID(s):: OSTI ID: 1841480

Journal Information:: Journal of Magnesium and Alloys, Journal Name: Journal of Magnesium and Alloys Vol. 10 Journal Issue: 10; ISSN 2213-9567

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (65)

Modeling strain rate sensitivity and high temperature deformation of Mg-3Al-1Zn alloy Chapuis, Adrien; Liu, Qing Journal of Magnesium and Alloys, Vol. 7, Issue 3 https://doi.org/10.1016/j.jma.2019.04.004	journal	September 2019
Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature Ghaffari Tari, D.; Worswick, M. J.; Ali, U. International Journal of Plasticity, Vol. 55 https://doi.org/10.1016/j.ijplas.2013.10.006	journal	April 2014
Temperature dependence of work hardening in sparsely twinning zirconium Singh, Jaiveer; Mahesh, S.; Roy, Shomic Acta Materialia, Vol. 123 https://doi.org/10.1016/j.actamat.2016.10.049	journal	January 2017
Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction Zhang, Minghe; Li, Longfei; Ding, Jie Acta Materialia, Vol. 141 https://doi.org/10.1016/j.actamat.2017.09.030	journal	December 2017
In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel Yan, Kun; Liss, Klaus-Dieter; Timokhina, Ilana B. Materials Science and Engineering: A, Vol. 662 https://doi.org/10.1016/j.msea.2016.03.048	journal	April 2016
Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity Rice, J. R. Journal of the Mechanics and Physics of Solids, Vol. 19, Issue 6 https://doi.org/10.1016/0022-5096(71)90010-X	journal	November 1971
An enhanced distortional-hardening-based constitutive model for hexagonal close-packed metals: Application to AZ31B magnesium alloy sheets at elevated temperatures Lee, Jinwoo; Bong, Hyuk Jong; Kim, Se-Jong International Journal of Plasticity, Vol. 126 https://doi.org/10.1016/j.ijplas.2019.10.006	journal	March 2020
Mechanik der plastischen Formänderung von Kristallen Mises, R. V. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 8, Issue 3 https://doi.org/10.1002/zamm.19280080302	journal	January 1928
Determining Individual Phase Flow Properties in a Quench and Partitioning Steel with In Situ High-Energy X-Ray Diffraction and Multiphase Elasto-Plastic Self-Consistent Method Hu, Xiaohua; Choi, Kyoo Sil; Sun, Xin Metallurgical and Materials Transactions A, Vol. 47, Issue 12 https://doi.org/10.1007/s11661-016-3373-2	journal	February 2016
Incorporation of deformation twinning in crystal plasticity models Kalidindi, Surya R. Journal of the Mechanics and Physics of Solids, Vol. 46, Issue 2 https://doi.org/10.1016/S0022-5096(97)00051-3	journal	February 1998
A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals Cazacu, O. International Journal of Plasticity, Vol. 20, Issue 11 https://doi.org/10.1016/j.ijplas.2003.11.021	journal	November 2004
Study of the mechanical properties of Mg-7.7at.% Al by in-situ neutron diffraction Gharghouri, M. A.; Weatherly, G. C.; Embury, J. D. Philosophical Magazine A, Vol. 79, Issue 7 https://doi.org/10.1080/01418619908210386	journal	July 1999
Tensile characterization and constitutive modeling of AZ31B magnesium alloy sheet over wide range of strain rates and temperatures Ulacia, I.; Salisbury, C. P.; Hurtado, I. Journal of Materials Processing Technology, Vol. 211, Issue 5 https://doi.org/10.1016/j.jmatprotec.2010.09.010	journal	May 2011
A Coupled Crystal Plasticity and Anisotropic Yield Function Model to Identify the Anisotropic Plastic Properties and Friction Behavior of an AA 3003 Alloy Bong, Hyuk Jong; Leem, Dohyun; Lee, Jinwoo Metallurgical and Materials Transactions A, Vol. 49, Issue 1 https://doi.org/10.1007/s11661-017-4406-1	journal	November 2017
Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations Raabe, D.; Klose, P.; Engl, B. Advanced Engineering Materials, Vol. 4, Issue 4 https://doi.org/10.1002/1527-2648(200204)4:4<169::AID-ADEM169>3.0.CO;2-G	journal	April 2002
A study of residual stresses in Zircaloy-2 with rod texture Turner, P. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 42, Issue 12 https://doi.org/10.1016/0956-7151(94)90191-0	journal	December 1994
Tensile-compressive yield asymmetries in high strength wrought magnesium alloys Ball, E. A.; Prangnell, P. B. Scripta Metallurgica et Materialia, Vol. 31, Issue 2 https://doi.org/10.1016/0956-716X(94)90159-7	journal	July 1994
Origin 7.0: Scientific Graphing and Data Analysis Software Edwards, Phillip M. Journal of Chemical Information and Computer Sciences, Vol. 42, Issue 5 https://doi.org/10.1021/ci0255432	journal	September 2002
Deformation mechanism in a coarse-grained Mg–Al–Zn alloy at elevated temperatures Watanabe, H.; Tsutsui, H.; Mukai, T. International Journal of Plasticity, Vol. 17, Issue 3 https://doi.org/10.1016/S0749-6419(00)00042-5	journal	March 2001
Crystallographic texture evolution in bulk deformation processing of FCC metals Kalidindi, S. R.; Bronkhorst, C. A.; Anand, L. Journal of the Mechanics and Physics of Solids, Vol. 40, Issue 3 https://doi.org/10.1016/0022-5096(92)80003-9	journal	January 1992
In situ high-energy X-ray diffraction investigation of the micromechanical behavior of Fe-0.1C-10Mn-0/2Al steel at room and elevated temperatures Zhang, Minghe; Tan, Qing; Ding, Jie Materials Science and Engineering: A, Vol. 729 https://doi.org/10.1016/j.msea.2018.05.102	journal	June 2018
Warm forming limits of rare earth-magnesium alloy ZEK100 sheet Boba, Mariusz; Butcher, Clifford; Panahi, Nima International Journal of Material Forming, Vol. 10, Issue 2 https://doi.org/10.1007/s12289-015-1267-2	journal	October 2015
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy Ardeljan, Milan; Beyerlein, Irene J.; McWilliams, Brandon A. International Journal of Plasticity, Vol. 83 https://doi.org/10.1016/j.ijplas.2016.04.005	journal	August 2016
Analysis of the hot deformation of ZK60 magnesium alloy Hadadzadeh, Amir; Wells, Mary A. Journal of Magnesium and Alloys, Vol. 5, Issue 4 https://doi.org/10.1016/j.jma.2017.09.002	journal	December 2017
Temperature-dependent crystal-plasticity model for magnesium: A bottom-up approach Liu, Qiang; Roy, Anish; Silberschmidt, Vadim V. Mechanics of Materials, Vol. 113 https://doi.org/10.1016/j.mechmat.2017.07.008	journal	October 2017
Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys Jiang, L.; Jonas, J. J.; Mishra, R. Materials Science and Engineering: A, Vol. 528, Issue 21 https://doi.org/10.1016/j.msea.2011.05.027	journal	August 2011
Mechanism of the Bauschinger effect in Al-Ge-Si alloys Gan, Wei; Bong, Hyuk Jong; Lim, Hojun Materials Science and Engineering: A, Vol. 684 https://doi.org/10.1016/j.msea.2016.12.020	journal	January 2017
Strain hardening behavior of Mg–Y alloys after extrusion process Zhao, Chaoyue; Li, Ziyan; Shi, Jiahui Journal of Magnesium and Alloys, Vol. 7, Issue 4 https://doi.org/10.1016/j.jma.2019.09.004	journal	December 2019
A crystal plasticity modeling considering volume fraction of deformation twinning Tadano, Yuichi; Yoshihara, Yui; Hagihara, Seiya International Journal of Plasticity, Vol. 84 https://doi.org/10.1016/j.ijplas.2016.05.002	journal	September 2016
Predicting failure modes and ductility of dual phase steels using plastic strain localization Sun, X.; Choi, K. S.; Liu, W. N. International Journal of Plasticity, Vol. 25, Issue 10 https://doi.org/10.1016/j.ijplas.2008.12.012	journal	October 2009
Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals Chapuis, Adrien; Driver, Julian H. Acta Materialia, Vol. 59, Issue 5 https://doi.org/10.1016/j.actamat.2010.11.064	journal	March 2011
On the Nonbasal Slip in Magnesium Crystals Yoshinaga, Hideo; Horiuchi, Ryo Transactions of the Japan Institute of Metals, Vol. 5, Issue 1 https://doi.org/10.2320/matertrans1960.5.14	journal	January 1964
Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model Ma, Chao; Chapuis, Adrien; Guo, XiaoQian Materials Science and Engineering: A, Vol. 682 https://doi.org/10.1016/j.msea.2016.11.027	journal	January 2017
The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning Brown, Donald W.; Agnew, Sean R.; Abeln, S. P. Materials Science Forum, Vol. 495-497 https://doi.org/10.4028/www.scientific.net/MSF.495-497.1037	journal	September 2005
Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates Kurukuri, Srihari; Worswick, Michael J.; Bardelcik, Alexander Metallurgical and Materials Transactions A, Vol. 45, Issue 8 https://doi.org/10.1007/s11661-014-2300-7	journal	April 2014
Elevated temperature constitutive behavior and simulation of warm forming of AZ31B Tari, D. Ghaffari; Worswick, M. J. Journal of Materials Processing Technology, Vol. 221 https://doi.org/10.1016/j.jmatprotec.2014.12.014	journal	July 2015
The effect of the 18R-LPSO phase on the fatigue behavior of extruded Mg/LPSO two-phase alloy through a comparative experimental-numerical study Briffod, Fabien; Shiraiwa, Takayuki; Enoki, Manabu Journal of Magnesium and Alloys, Vol. 9, Issue 1 https://doi.org/10.1016/j.jma.2020.07.005	journal	January 2021
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet Jain, A.; Agnew, S. R. Materials Science and Engineering: A, Vol. 462, Issue 1-2 https://doi.org/10.1016/j.msea.2006.03.160	journal	July 2007
Constitutive characterization of a rare-earth magnesium alloy sheet (ZEK100-O) in shear loading: Studies of anisotropy and rate sensitivity Abedini, A.; Butcher, C.; Nemcko, M. J. International Journal of Mechanical Sciences, Vol. 128-129 https://doi.org/10.1016/j.ijmecsci.2017.04.013	journal	August 2017
A polycrystal based numerical investigation on the temperature dependence of slip resistance and texture evolution in magnesium alloy AZ31B Liu, Yao; Wei, Yujie International Journal of Plasticity, Vol. 55 https://doi.org/10.1016/j.ijplas.2013.09.011	journal	April 2014
Investigation of the alloying effect on deformation behavior in Mg by Visco-Plastic Self-Consistent modeling Maldar, Alireza; Wang, Leyun; Zhu, Gaoming Journal of Magnesium and Alloys, Vol. 8, Issue 1 https://doi.org/10.1016/j.jma.2019.07.009	journal	March 2020
Incorporation of twinning into a crystal plasticity finite element model: Evolution of lattice strains and texture in Zircaloy-2 Abdolvand, Hamidreza; Daymond, Mark R.; Mareau, Charles International Journal of Plasticity, Vol. 27, Issue 11 https://doi.org/10.1016/j.ijplas.2011.04.005	journal	November 2011
Crystal plasticity finite element–Marciniak-Kuczynski approach with surface roughening effect in predicting formability of ultra-thin ferritic stainless steel sheets Bong, Hyuk Jong; Lee, Jinwoo International Journal of Mechanical Sciences, Vol. 191 https://doi.org/10.1016/j.ijmecsci.2020.106066	journal	February 2021
The texture and anisotropy of magnesium–zinc–rare earth alloy sheets Bohlen, Jan; Nürnberg, Marcus R.; Senn, Jeremy W. Acta Materialia, Vol. 55, Issue 6 https://doi.org/10.1016/j.actamat.2006.11.013	journal	April 2007
An RVE procedure for micromechanical prediction of mechanical behavior of dual-phase steel Bong, Hyuk Jong; Lim, Hojun; Lee, Myoung-Gyu Materials Science and Engineering: A, Vol. 695 https://doi.org/10.1016/j.msea.2017.04.032	journal	May 2017
Geometrical effects in the inhomogeneous deformation of ductile single crystals Asaro, Robert J. Acta Metallurgica, Vol. 27, Issue 3 https://doi.org/10.1016/0001-6160(79)90036-1	journal	March 1979
Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach Hu, X. H.; Sun, X.; Hector, L. G. Acta Materialia, Vol. 132 https://doi.org/10.1016/j.actamat.2017.04.028	journal	June 2017
Slip, twinning, and fracture in hexagonal close-packed metals Yoo, M. H. Metallurgical Transactions A, Vol. 12, Issue 3 https://doi.org/10.1007/BF02648537	journal	March 1981
Measuring Ti-7Al slip system strengths at elevated temperature using high-energy X-ray diffraction Pagan, Darren C.; Bernier, Joel V.; Dale, Darren Scripta Materialia, Vol. 142 https://doi.org/10.1016/j.scriptamat.2017.08.029	journal	January 2018
Modelling on flow stress of Mg–Al–Zn alloys at elevated temperatures Takuda, H.; Fujimoto, H.; Hatta, N. Journal of Materials Processing Technology, Vol. 80-81 https://doi.org/10.1016/S0924-0136(98)00154-X	journal	August 1998
Mechanism-based constitutive modeling of ZEK100 magnesium alloy with crystal plasticity and in-situ HEXRD experiment Bong, Hyuk Jong; Hu, Xiaohua; Sun, Xin International Journal of Plasticity, Vol. 113 https://doi.org/10.1016/j.ijplas.2018.09.005	journal	February 2019
Phenomenological crystal plasticity modeling and detailed micromechanical investigations of pure magnesium Zhang, Jing; Joshi, Shailendra P. Journal of the Mechanics and Physics of Solids, Vol. 60, Issue 5 https://doi.org/10.1016/j.jmps.2012.01.005	journal	May 2012
A model for texture development dominated by deformation twinning: Application to zirconium alloys Tomé, C. N.; Lebensohn, R. A.; Kocks, U. F. Acta Metallurgica et Materialia, Vol. 39, Issue 11 https://doi.org/10.1016/0956-7151(91)90083-D	journal	November 1991
Elastic-Plastic Deformation at Finite Strains Lee, E. H. Journal of Applied Mechanics, Vol. 36, Issue 1 https://doi.org/10.1115/1.3564580	journal	March 1969
{112̄2}〈23〉 Slip system in magnesium Obara, T.; Yoshinga, H.; Morozumi, S. Acta Metallurgica, Vol. 21, Issue 7 https://doi.org/10.1016/0001-6160(73)90141-7	journal	July 1973
Study on Plastic Response Under Biaxial Tension and Its Correlation with Formability for Wrought Magnesium Alloys Bong, Hyuk Jong; Lee, Jinwoo; Lee, Myoung-Gyu JOM, Vol. 72, Issue 7 https://doi.org/10.1007/s11837-020-04084-w	journal	February 2020
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals Wang, H.; Wu, P. D.; Tomé, C. N. Materials Science and Engineering: A, Vol. 555 https://doi.org/10.1016/j.msea.2012.06.038	journal	October 2012
In Situ Local Measurement of Austenite Mechanical Stability and Transformation Behavior in Third-Generation Advanced High-Strength Steels Abu-Farha, Fadi; Hu, Xiaohua; Sun, Xin Metallurgical and Materials Transactions A, Vol. 49, Issue 7 https://doi.org/10.1007/s11661-018-4660-x	journal	May 2018
A temperature-dependent elasto-plastic constitutive model for magnesium alloy AZ31 sheets Kim, Ji Hoon; Kim, Daeyong; Lee, Young-Seon International Journal of Plasticity, Vol. 50 https://doi.org/10.1016/j.ijplas.2013.04.001	journal	November 2013
Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B John Neil, C.; Agnew, Sean R. International Journal of Plasticity, Vol. 25, Issue 3 https://doi.org/10.1016/j.ijplas.2008.05.003	journal	March 2009
Study of lattice strains in magnesium alloy AZ31 based on a large strain elastic-viscoplastic self-consistent polycrystal model Wang, H.; Wu, P. D.; Tomé, C. N. International Journal of Solids and Structures, Vol. 49, Issue 15-16 https://doi.org/10.1016/j.ijsolstr.2012.04.026	journal	August 2012
Sheet texture modification in magnesium-based alloys by selective rare earth alloying Al-Samman, T.; Li, X. Materials Science and Engineering: A, Vol. 528, Issue 10-11 https://doi.org/10.1016/j.msea.2011.01.080	journal	April 2011
Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures Khan, Akhtar S.; Pandey, Amit; Gnäupel-Herold, Thomas International Journal of Plasticity, Vol. 27, Issue 5 https://doi.org/10.1016/j.ijplas.2010.08.009	journal	May 2011
Anisotropy, tension-compression asymmetry and texture evolution of a rare-earth-containing magnesium alloy sheet, ZEK100, at different strain rates and temperatures: Experiments and modeling Habib, Saadi A.; Khan, Akhtar S.; Gnäupel-Herold, Thomas International Journal of Plasticity, Vol. 95 https://doi.org/10.1016/j.ijplas.2017.04.006	journal	August 2017
A crystal plasticity model for hexagonal close packed (HCP) crystals including twinning and de-twinning mechanisms Wang, H.; Wu, P. D.; Wang, J. International Journal of Plasticity, Vol. 49 https://doi.org/10.1016/j.ijplas.2013.02.016	journal	October 2013

Similar Records

Mechanism-based constitutive modeling of ZEK100 magnesium alloy with crystal plasticity and in-situ HEXRD experiment

Journal Article · Sat Sep 15 00:00:00 EDT 2018 · International Journal of Plasticity · OSTI ID:1825195

Bong, Hyuk Jong; Hu, Xiaohua; Sun, Xin; +1 more

Crystal plasticity based constitutive modeling of ZEK100 magnesium alloy combined with in-situ HEXRD experiments

Journal Article · Sun Jul 01 00:00:00 EDT 2018 · Journal of Physics. Conference Series · OSTI ID:1825195

Bong, Hyuk Jong; Hu, Xiaohua; Sun, Xin; +2 more

Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach

Journal Article · Fri Apr 21 00:00:00 EDT 2017 · Acta Materialia · OSTI ID:1825195

Hu, Xiao Hua; Sun, X.; Hector, Jr., L. G.; +1 more

Related Subjects

36 MATERIALS SCIENCE
High-energy X-ray diffraction
Crystal plasticity finite element
Elastic-plastic self-consistent model
TwinTemperature

Title: Temperature-dependent constitutive modeling of a magnesium alloy ZEK100 sheet using crystal plasticity models combined with in situ high-energy X-ray diffraction experiment

Citation Formats

References (65)

Similar Records

Related Subjects