Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Journal Article · · Science

The interfaces of perovskite solar cells (PSCs) are important in determining their efficiency and stability, but the morphology and stability of imbedded perovskite-substrate interfaces have received less attention than have top interfaces. We found that dimethyl sulfoxide (DMSO), which is a liquid additive broadly applied to enhance perovskite film morphology, was trapped during film formation and led to voids at perovskite-substrate interfaces that accelerated the film degradation under illumination. Partial replacement of DMSO with solid-state carbohydrazide reduces interfacial voids. A maximum stabilized power conversion efficiency (PCE) of 23.6% was realized for blade-coated p-type/intrinsic/n-type (p-i-n) structure PSCs with no efficiency loss after 550-hour operational stability tests at 60°C. The perovskite mini-modules showed certified PCEs of 19.3 and 19.2%, with aperture areas of 18.1 and 50.0 square centimeters, respectively.

Sponsoring Organization:
USDOE
OSTI ID:
1822475
Journal Information:
Science, Journal Name: Science Journal Issue: 6557 Vol. 373; ISSN 0036-8075
Publisher:
American Association for the Advancement of Science (AAAS)Copyright Statement
Country of Publication:
United States
Language:
English

References (26)

Buried Interfaces in Halide Perovskite Photovoltaics journal January 2021
Air-Stable, Efficient Mixed-Cation Perovskite Solar Cells with Cu Electrode by Scalable Fabrication of Active Layer journal April 2016
From Defects to Degradation: A Mechanistic Understanding of Degradation in Perovskite Solar Cell Devices and Modules journal March 2020
20.8% Slot‐Die Coated MAPbI 3 Perovskite Solar Cells by Optimal DMSO‐Content and Age of 2‐ME Based Precursor Inks journal January 2021
The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers journal May 2015
Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells journal September 2019
Precursor Engineering for a Large-Area Perovskite Solar Cell with >19% Efficiency journal September 2019
Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour journal December 2016
Excess charge-carrier induced instability of hybrid perovskites journal November 2018
Defects engineering for high-performance perovskite solar cells journal August 2018
Controlling competing photochemical reactions stabilizes perovskite solar cells journal May 2019
The surface of halide perovskites from nano to bulk journal July 2020
Efficient perovskite solar cells via improved carrier management journal February 2021
2-Methoxyethanol as a new solvent for processing methylammonium lead halide perovskite solar cells journal January 2017
Imperfections and their passivation in halide perovskite solar cells journal January 2019
I 2 vapor-induced degradation of formamidinium lead iodide based perovskite solar cells under heat–light soaking conditions journal January 2019
Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films journal December 2019
Crystallization in one-step solution deposition of perovskite films: Upward or downward? journal January 2021
Iodine reduction for reproducible and high-performance perovskite solar cells and modules journal March 2021
Promises and challenges of perovskite solar cells journal November 2017
Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture journal October 2018
Challenges for commercializing perovskite solar cells journal September 2018
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts journal August 2019
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide journal November 2019
Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells journal March 2020
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction journal December 2020

Similar Records

Hot-Casting-Assisted Liquid Additive Engineering for Efficient and Stable Perovskite Solar Cells
Journal Article · Thu Jul 14 20:00:00 EDT 2022 · Advanced Materials · OSTI ID:1976219

Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands
Journal Article · Fri Apr 12 00:00:00 EDT 2024 · Science · OSTI ID:2579992

Multifunctional entinostat enhances the mechanical robustness and efficiency of flexible perovskite solar cells and minimodules
Journal Article · Wed Jan 17 19:00:00 EST 2024 · Nature Photonics · OSTI ID:2337952

Related Subjects