Pilot Testing of a Modular Oxygen Production System Using Oxygen Binding Adsorbents (Final Report)
- RTI International, Research Triangle Park, NC (United States)
In this project, RTI and Air Liquide have focused on the development of innovative oxygen separation materials and technologies based on reversibly binding of oxygen to enable smaller and cheaper air separations. In alignment with that object the team has had multiple achievements to advance the technology including: Synthesized and characterized novel M-CoSalen (RTIO2Sorb-1) material which showed a dynamic oxygen adsorption capacity in excess of 1wt%. Developed synthesis routes for RTIO2Sorb-1 with commercially relevant techniques and produced batches of 0.25kg and over 4 kg of total synthesis. Synthesized and characterized extrudate forms of the RTIO2Sorb-1 with relevant crush strength and maintained dynamic oxygen adsorption capacity in near 1wt%. Developed techniques for forming structured beds in fiber shapes with conventional materials. Developed a model for O2 sorption processes to analyze various bed configurations and cycle parameters. Studied classic O2 solid sorbents reported in the literature to learn oxygen binding mechanisms. Design a 10 kg/day O2 VPSA pilot system with 2 or 4-bed operation. Completed a techno-economic analysis based on the experimental results and modeling. The overall objective of the project was to design, fabricate, and test a modular O2 production system and perform a techno-economic analysis (TEA) after testing to determine the cost-benefit of the advanced modular air separation system. The goals of this technology development project were to achieve a bed-size factor (BSF) of less than 600 lb-adsorbent/TPD O2 (ton/day O2) (as compared with the state-of-the-art BSF of 850), and O2-purity greater than 95% at a cost that is projected to be equivalent or lower than the current state of the art (SOTA), commercially available large-scale cryogenic air separation systems. To achieve these goals and objective, the project team executed on (1) oxygen binding adsorbent optimization and scale up, (2) adsorbent material formation process studies to form the adsorbent material into structured beds for rapid pressure swing adsorption (PSA) cycles with low pressure drop, fast mass transfer, and low attrition, (3) cycle development studies to optimize the PSA process, and (4) develop simulation tools for rapid cycle modeling and numerical evaluation/optimization.
- Research Organization:
- RTI International, Research Triangle Park, NC (United States)
- Sponsoring Organization:
- USDOE Office of Fossil Energy (FE)
- DOE Contract Number:
- FE0031527
- OSTI ID:
- 1814887
- Report Number(s):
- DOE-RTI-FE31527
- Country of Publication:
- United States
- Language:
- English
Similar Records
O2 Binding Materials and highly Efficient Modular System for Oxygen Production
Improving Energy Efficiency of Air Separation via Hollow Fiber Sorbents