NuScale Pressure and Temperature Limits Methodology Using Finite Element Analysis
Conference
·
OSTI ID:1813579
- Program Management Office
Per 10 CFR 50 Appendix G, the pressure-temperature (P-T) limits curves and minimum temperature must be established to provide adequate margins for ferritic pressure-retaining components of the reactor coolant pressure boundary; this is to protect against brittle failure during any normal operating conditions, including anticipated operational occurrences and system hydrostatic tests, to which the pressure boundary may be subjected over its service lifetime. Specifically, ASME Code Section XI Appendix G procedures must be used for P-T limits calculation considering the pressure and temperature at various operating transient conditions. However, the elastic fracture mechanics solutions in Section XI are only suitable for cylindrical reactor pressure vessel (RPV) beltline without geometric discontinuities. Hence, these solutions are not suitable for postulated flaws near the core support blocks attached to the NuScale RPV inside surface, which is part of the beltline. As a result, NuScale has used finite element analysis to calculate thermal stress and stress intensity factor for the postulated flaws. The solutions using finite-element analysis have been validated using the formulations for straight cylinders for both axial and circumferential flaws. In addition, special considerations are given to the RPV beltline nil-ductility transition temperature (RTNDT) due to neutron irradiation occurring at lower temperatures than conventional plants. The paper summarizes the methodology and finite-element models used to develop P-T limits curves for NuScale RPV at the end of its 60-year design life.
- Research Organization:
- NuScale Power, LLC
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE)
- DOE Contract Number:
- NE0008928
- OSTI ID:
- 1813579
- Report Number(s):
- DOE-NuScale-08928-10
- Country of Publication:
- United States
- Language:
- English
Similar Records
ADDITIONAL STRESS AND FRACTURE MECHANICS ANALYSES OF PRESSURIZED WATER REACTOR PRESSURE VESSEL NOZZLES
A Proposal for the Maximum KIC for Use in ASME Code Flaw and Fracture Toughness Evaluations
Application of the failure assessment diagram to the evaluation of pressure-temperature limits for a pressurized water reactor
Conference
·
Sat Dec 31 23:00:00 EST 2011
·
OSTI ID:1048724
A Proposal for the Maximum KIC for Use in ASME Code Flaw and Fracture Toughness Evaluations
Conference
·
Fri Dec 31 23:00:00 EST 2010
·
OSTI ID:1020818
Application of the failure assessment diagram to the evaluation of pressure-temperature limits for a pressurized water reactor
Conference
·
Fri Jun 01 00:00:00 EDT 1984
· Am. Soc. Mech. Eng., (Pap.); (United States)
·
OSTI ID:6291248