skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Advanced nanoscale characterization of aluminum nanoparticles with modified surface morphology via atmospheric helium and carbon monoxide plasmas

Journal Article · · Journal of Applied Physics
DOI:https://doi.org/10.1063/5.0037637· OSTI ID:1798047

Aluminum nanoparticles (nAl) have the potential as energetic additives in explosive/propellant formulations. Scalable methodologies must be pursued to mitigate the inactive amorphous alumina shell surrounding the active aluminum (Al) core with modified surface morphology and chemistry for increased combustion effects. This work explores the feasibility of making reactive core/shell nAl with thinned oxide shells and modified surface coatings via a two-step atmospheric plasma surface treatment process in a custom dielectric barrier discharge plasma reactor. The commercial nAl of nominal average size similar to 40-60nm was first treated with helium (He) followed by He/carbon monoxide (CO) plasmas for different durations. The resultant samples were characterized via high-resolution transmission electron microscopy (HRTEM) and Fourier transform IR (FTIR) spectra. HRTEM images revealed sporadic patchy gamma -alumina deposits on particle surfaces and in gaps among particles for all samples, suggesting the non-uniform plasma effects of the He/CO glow. Nanoscale chemical analyses via scanning transmission electron microscopy elemental mapping and x-ray energy dispersive spectroscopy were further performed. Although no carbon-associated structure appeared in electron energy loss spectroscopy (EELS) spectra, the presence of carbonaceous materials was confirmed as a thin dispersive layer evenly distributed on the nAl surface suggesting either its amorphous nature or is present at a level insufficient to generate satisfactory EELS spectra. The trend of intensity profiles for key elements acquired by drawing lines across a single particle on the elemental maps confirmed that carbonaceous materials only existed on the surface and they were most likely carboxylates that increased with increased He/CO treatment duration, as evident by FTIR results. Finally, this work demonstrated the success of atmospheric plasma-treated reactive nAl with comprehensively characterized surface features via advanced microscopy and spectroscopy.

Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States)
Sponsoring Organization:
USDOE Office of Science (SC), Basic Energy Sciences (BES). Scientific User Facilities Division; USDOD
Grant/Contract Number:
AC02-06CH11357; CNM 61797
OSTI ID:
1798047
Journal Information:
Journal of Applied Physics, Vol. 129, Issue 6; ISSN 0021-8979
Publisher:
American Institute of Physics (AIP)Copyright Statement
Country of Publication:
United States
Language:
English

References (39)

Molecular dynamics study of structural properties of amorphous Al 2 O 3 journal February 2002
Nanometric Aluminum in Explosives journal November 2002
Nanoenergetic Materials for MEMS: A Review journal August 2007
Improving aluminum particle reactivity by annealing and quenching treatments: Synchrotron X-ray diffraction analysis of strain journal January 2016
The Adsorption of Water Vapor on Glass Surfaces journal July 1948
Production of carbon-coated aluminium nanopowders in pulsed microarc discharge journal September 2002
The Structure of Poly(carbonsuboxide) on the Atomic Scale: A Solid-State NMR Study journal May 2005
Nano Aluminum Energetics: The Effect of Synthesis Method on Morphology and Combustion Performance journal December 2011
Graphitic coated Al nanoparticles manufactured as superior energetic materials via laser ablation synthesis in organic solvents journal April 2019
Amorphous Alumina Nanoparticles: Structure, Surface Energy, and Thermodynamic Phase Stability journal August 2013
The Effect of Binder Systems on Early Aluminum Reaction in Detonations journal May 2013
Nanomaterials for Heterogeneous Combustion journal February 2004
Hydrolysis and Heat Treatment of Aluminum Dust journal June 2001
Evaluating compositional effects on the laser-induced combustion and shock velocities of Al/Zr-based composite fuels journal March 2020
Plasma surface treatment of aluminum nanoparticles for energetic material applications journal August 2019
Electrophoretic deposition of nickel, iron and aluminum nanoparticles on carbon fibers journal August 2005
Combustion Behavior of Highly Energetic Thermites: Nano versus Micron Composites journal February 2005
Characterization and thermal properties of carbon-coated aluminum nanopowders prepared by laser-induction complex heating in methane journal June 2007
Influence of gas flow dynamics on discharge stability and on the uniformity of atmospheric pressure PECVD thin film journal May 2009
Preparation of mono-dispersed, high energy release, core/shell structure Al nanopowders and their application in HTPB propellant as combustion enhancers journal July 2017
Characterizing the coating and size-resolved oxidative stability of carbon-coated aluminum nanoparticles by single-particle mass-spectrometry journal May 2006
Plasma Chemistry book January 2008
Role of Constituent Configuration on Shock-Induced Reactions in a Ni+Al Powder Mixture journal January 2005
Quantifying the enhanced combustion characteristics of electrospray assembled aluminum mesoparticles journal May 2016
Metal-based reactive nanomaterials journal April 2009
Structural analysis of highly porous γ-Al2O3 journal September 2014
Mechanical activation and gasless explosion: Nanostructural aspects journal November 2011
Carbon suboxide polymers. Part 1.—Structure of thermal polymers journal January 1964
Carbon suboxide polymers. Part 2.—Pyrolysis of thermal polymers journal January 1964
Reactive, Mechanically Alloyed Al·Mg Powders with Customized Particle Sizes and Compositions journal January 2014
Analysis of solid products formed in atmospheric non-thermal carbon monoxide plasma journal June 2011
Preparation of Energetic Metastable Nano-Composite Materials by Arrested Reactive Milling journal January 2003
An investigation of commercial gamma-Al 2 O 3 nanoparticles journal April 2010
Material Characterization of Plasma-Treated Aluminum Particles via Different Gases journal March 2019
The influence of magnesium powder on the thermal behavior of Al–CuO thermite mixture journal March 2017
Energetic Performance of Optically Activated Aluminum/Graphene Oxide Composites journal October 2018
Formation of giant onion-like fullerenes under Al nanoparticles by electron irradiation journal September 1998
Structural characterization of amorphous alumina and its polymorphs from first-principles XPS and NMR calculations journal March 2011
Carbon suboxide polymers journal January 1986

Similar Records

Structure and spectroscopic properties of C-Ni and CN{sub x}-Ni nanocomposite films
Journal Article · Mon Aug 01 00:00:00 EDT 2005 · Journal of Applied Physics · OSTI ID:1798047

Study of reaction sequences during MSR synthesis of TiC by controlled ball milling of titanium and graphite
Journal Article · Fri Jun 15 00:00:00 EDT 2018 · Materials Characterization · OSTI ID:1798047

Synthesis of nano-sized amorphous boron powders through active dilution self-propagating high-temperature synthesis method
Journal Article · Sat Jun 01 00:00:00 EDT 2013 · Materials Research Bulletin · OSTI ID:1798047

Related Subjects