Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Li, Yuan; Hou, Peijun; Wu, Zhenggang; Feng, Zhili; Ren, Yang; Choo, Hahn

doi:10.1016/j.matdes.2021.109562

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Journal Article · Sat Feb 06 00:00:00 EST 2021 · Materials & Design

DOI:https://doi.org/10.1016/j.matdes.2021.109562· OSTI ID:1788243

Li, Yuan ^[1]; Hou, Peijun ^[1]; Wu, Zhenggang ^[2]; Feng, Zhili ^[3]; Ren, Yang ^[4]; Choo, Hahn ^[1]

Univ. of Tennessee, Knoxville, TN (United States). Materials Science and Engineering
Hunan Univ. (China). Materials Science and Engineering
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Materials Science and Technology Division
Argonne National Lab. (ANL), Argonne, IL (United States). X-ray Science Division

Effect of dynamic recrystallization (DRX) on the grain refinement and texture modification was studied by conducting a series of hot compression on AZ31B Mg alloy. Processing-grain size-texture maps were established as a function of temperature, strain rate, strain, and the Zener-Hollomon parameter (Z). Moreover, influence of simultaneous changes in the grain size and texture on tensile yield strength and ductility of the hot-worked Mg alloy was studied using the grain size and texture maps established. The processing-grain size map showed that the DRX grain size decreased with the increase in Z, also revealing various characteristics ranging from a grain growth, grain refinement, to a bimodal distribution of ultrafine grains and partially recrystallized grains. The effect of twinning on the grain refinement was also evident at high Z conditions. The processing-texture map revealed that the initial fiber texture was altered significantly to a shear, off-normal, or extension-twin texture with the increase in Z. The Schmid-factor maps were calculated to identify a dominant deformation mode during a subsequent tensile deformation of the hot-worked samples. Finally, a corresponding Hall-Petch relationship for each dominant deformation mode was used to establish tensile yield-strength maps, which agree well with the measured data.

View Accepted Manuscript (DOE)

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES). Materials Sciences & Engineering Division

Grant/Contract Number:: AC02-06CH11357; AC05-00OR22725

OSTI ID:: 1788243

Alternate ID(s):: OSTI ID: 1819528

Journal Information:: Materials & Design, Journal Name: Materials & Design Vol. 202; ISSN 0264-1275

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (66)

Slip, twinning, and fracture in hexagonal close-packed metals Yoo, M. H. Metallurgical Transactions A, Vol. 12, Issue 3 https://doi.org/10.1007/BF02648537	journal	March 1981
Magnesium and its alloys applications in automotive industry Kulekci, Mustafa Kemal The International Journal of Advanced Manufacturing Technology, Vol. 39, Issue 9-10 https://doi.org/10.1007/s00170-007-1279-2	journal	November 2007
Microstructural Development during Hot Working of Mg-3Al-1Zn Beer, A. G.; Barnett, M. R. Metallurgical and Materials Transactions A, Vol. 38, Issue 8 https://doi.org/10.1007/s11661-007-9207-5	journal	July 2007
Transient Heat and Material Flow Modeling of Friction Stir Processing of Magnesium Alloy using Threaded Tool Yu, Zhenzhen; Zhang, Wei; Choo, Hahn Metallurgical and Materials Transactions A, Vol. 43, Issue 2 https://doi.org/10.1007/s11661-011-0862-1	journal	September 2011
Correlation Between Texture Variation and Transverse Tensile Behavior of Friction-Stir-Processed AZ31 Mg Alloy Xin, Renlong; Li, Bo; Liao, Ailin Metallurgical and Materials Transactions A, Vol. 43, Issue 7 https://doi.org/10.1007/s11661-012-1080-1	journal	March 2012
{112̄2}〈23〉 Slip system in magnesium Obara, T.; Yoshinga, H.; Morozumi, S. Acta Metallurgica, Vol. 21, Issue 7 https://doi.org/10.1016/0001-6160(73)90141-7	journal	July 1973
Deformation mechanisms in h.c.p. metals at elevated temperatures—II. Creep behavior of a Mg-0.8% Al solid solution alloy Vagarali, Suresh S.; Langdon, Terence G. Acta Metallurgica, Vol. 30, Issue 6 https://doi.org/10.1016/0001-6160(82)90009-8	journal	June 1982
A controlling factor for dynamic recrystallisation Sandström, Rolf; Lagneborg, Rune Scripta Metallurgica, Vol. 9, Issue 1 https://doi.org/10.1016/0036-9748(75)90146-5	journal	January 1975
Magnesium Mordike, B. L.; Ebert, T. Materials Science and Engineering: A, Vol. 302, Issue 1 https://doi.org/10.1016/S0921-5093(00)01351-4	journal	April 2001
Grain refining of magnesium alloy AZ31 by rolling Chang, Tien-Chan; Wang, Jian-Yi; O., Chia-Ming Journal of Materials Processing Technology, Vol. 140, Issue 1-3 https://doi.org/10.1016/S0924-0136(03)00797-0	journal	September 2003
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 Galiyev, A.; Kaibyshev, R.; Gottstein, G. Acta Materialia, Vol. 49, Issue 7 https://doi.org/10.1016/S1359-6454(01)00020-9	journal	April 2001
Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing Kim, W. J.; Hong, S. I.; Kim, Y. S. Acta Materialia, Vol. 51, Issue 11 https://doi.org/10.1016/S1359-6454(03)00161-7	journal	June 2003
Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn Barnett, M. R.; Keshavarz, Z.; Beer, A. G. Acta Materialia, Vol. 52, Issue 17 https://doi.org/10.1016/j.actamat.2004.07.015	journal	October 2004
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations Agnew, S. R.; Mehrotra, P.; Lillo, T. M. Acta Materialia, Vol. 53, Issue 11 https://doi.org/10.1016/j.actamat.2005.02.019	journal	June 2005
Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling del Valle, J. A.; Carreño, F.; Ruano, O. A. Acta Materialia, Vol. 54, Issue 16 https://doi.org/10.1016/j.actamat.2006.05.018	journal	September 2006
Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction Agnew, S.; Brown, D.; Tome, C. Acta Materialia, Vol. 54, Issue 18 https://doi.org/10.1016/j.actamat.2006.06.020	journal	October 2006
Twinning and texture development in two Mg alloys subjected to loading along three different strain paths Jiang, L.; Jonas, J. J.; Mishra, R. K. Acta Materialia, Vol. 55, Issue 11 https://doi.org/10.1016/j.actamat.2007.03.006	journal	June 2007
Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy Barnett, M. R.; Keshavarz, Z.; Beer, A. G. Acta Materialia, Vol. 56, Issue 1 https://doi.org/10.1016/j.actamat.2007.08.034	journal	January 2008
Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy Woo, W.; Choo, H.; Prime, M. B. Acta Materialia, Vol. 56, Issue 8 https://doi.org/10.1016/j.actamat.2007.12.020	journal	May 2008
Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets Yi, Sangbong; Bohlen, Jan; Heinemann, Frank Acta Materialia, Vol. 58, Issue 2 https://doi.org/10.1016/j.actamat.2009.09.038	journal	January 2010
Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates Ulacia, I.; Dudamell, N. V.; Gálvez, F. Acta Materialia, Vol. 58, Issue 8 https://doi.org/10.1016/j.actamat.2010.01.029	journal	May 2010
Deformation mechanisms and plastic anisotropy in magnesium alloy AZ31 Stanford, N.; Sotoudeh, K.; Bate, P. S. Acta Materialia, Vol. 59, Issue 12 https://doi.org/10.1016/j.actamat.2011.04.028	journal	July 2011
A synchrotron X-ray diffraction study on the phase transformation kinetics and texture evolution of a TRIP steel subjected to torsional loading Cakmak, Ercan; Choo, Hahn; An, Ke Acta Materialia, Vol. 60, Issue 19 https://doi.org/10.1016/j.actamat.2012.08.040	journal	November 2012
Evolution of texture and microstructure during hot torsion of a magnesium alloy Biswas, Somjeet; Beausir, Benoît; Toth, Laszlo S. Acta Materialia, Vol. 61, Issue 14 https://doi.org/10.1016/j.actamat.2013.05.018	journal	August 2013
Influence of texture on Hall–Petch relationships in an Mg alloy Wang, Yi; Choo, Hahn Acta Materialia, Vol. 81 https://doi.org/10.1016/j.actamat.2014.08.023	journal	December 2014
Effect of grain size on slip activity in pure magnesium polycrystals Cepeda-Jiménez, C. M.; Molina-Aldareguia, J. M.; Pérez-Prado, M. T. Acta Materialia, Vol. 84 https://doi.org/10.1016/j.actamat.2014.10.001	journal	February 2015
Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals Cepeda-Jiménez, C. M.; Molina-Aldareguia, J. M.; Carreño, F. Acta Materialia, Vol. 85 https://doi.org/10.1016/j.actamat.2014.11.013	journal	February 2015
Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium Cepeda-Jiménez, C. M.; Molina-Aldareguia, J. M.; Pérez-Prado, M. T. Acta Materialia, Vol. 88 https://doi.org/10.1016/j.actamat.2015.01.032	journal	April 2015
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B Agnew, Sean R.; Duygulu, Özgür International Journal of Plasticity, Vol. 21, Issue 6 https://doi.org/10.1016/j.ijplas.2004.05.018	journal	June 2005
Crystal plasticity analysis of texture development in magnesium alloy during extrusion Mayama, Tsuyoshi; Noda, Masafumi; Chiba, Ryoichi International Journal of Plasticity, Vol. 27, Issue 12 https://doi.org/10.1016/j.ijplas.2011.02.007	journal	December 2011
Effects of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy Chen, Yongjun; Wang, Qudong; Peng, Jianguo Journal of Materials Processing Technology, Vol. 182, Issue 1-3 https://doi.org/10.1016/j.jmatprotec.2006.08.012	journal	February 2007
3D modeling of material flow in friction stir welding under different process parameters Zhang, H. W.; Zhang, Z.; Chen, J. T. Journal of Materials Processing Technology, Vol. 183, Issue 1 https://doi.org/10.1016/j.jmatprotec.2006.09.027	journal	March 2007
Hall-Petch relationship in Mg alloys: A review Yu, Huihui; Xin, Yunchang; Wang, Maoyin Journal of Materials Science & Technology, Vol. 34, Issue 2 https://doi.org/10.1016/j.jmst.2017.07.022	journal	February 2018
Twinning effects on the hot deformation behavior of AZ31 Mg alloy Chen, Yuanli; Jin, Li; Dong, Jie Materials Characterization, Vol. 118 https://doi.org/10.1016/j.matchar.2016.06.014	journal	August 2016
A review of dynamic recrystallization phenomena in metallic materials Huang, K.; Logé, R. E. Materials & Design, Vol. 111 https://doi.org/10.1016/j.matdes.2016.09.012	journal	December 2016
Mechanical properties and microstructure of AZ31 Mg alloy processed by two-step equal channel angular extrusion Jin, Li; Lin, Dongliang; Mao, Dali Materials Letters, Vol. 59, Issue 18 https://doi.org/10.1016/j.matlet.2004.09.061	journal	August 2005
Internal strain and texture evolution during deformation twinning in magnesium Brown, D. W.; Agnew, S. R.; Bourke, M. A. M. Materials Science and Engineering: A, Vol. 399, Issue 1-2 https://doi.org/10.1016/j.msea.2005.02.016	journal	June 2005
Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion Agnew, S. R.; Mehrotra, P.; Lillo, T. M. Materials Science and Engineering: A, Vol. 408, Issue 1-2 https://doi.org/10.1016/j.msea.2005.07.052	journal	November 2005
Mechanical behaviour and microstructural evolution of magnesium alloy AZ31 in tension at different temperatures Yi, S. B.; Zaefferer, S.; Brokmeier, H. -G. Materials Science and Engineering: A, Vol. 424, Issue 1-2 https://doi.org/10.1016/j.msea.2006.03.022	journal	May 2006
Effect of extrusion conditions on grain refinement and fatigue behaviour in magnesium alloys Uematsu, Y.; Tokaji, K.; Kamakura, M. Materials Science and Engineering: A, Vol. 434, Issue 1-2 https://doi.org/10.1016/j.msea.2006.06.117	journal	October 2006
Dynamic recrystallization in AZ31 magnesium alloy Fatemi-Varzaneh, S. M.; Zarei-Hanzaki, A.; Beladi, H. Materials Science and Engineering: A, Vol. 456, Issue 1-2 https://doi.org/10.1016/j.msea.2006.11.095	journal	May 2007
Twinning and the ductility of magnesium alloys Barnett, M. R. Materials Science and Engineering: A, Vol. 464, Issue 1-2 https://doi.org/10.1016/j.msea.2006.12.037	journal	August 2007
Stretch formability of AZ31 Mg alloy sheets at different testing temperatures Chino, Yasumasa; Iwasaki, Hajime; Mabuchi, Mamoru Materials Science and Engineering: A, Vol. 466, Issue 1-2 https://doi.org/10.1016/j.msea.2007.02.027	journal	September 2007
Dynamic recrystallization of Mg and Mg–Y alloys: Crystallographic texture development Cottam, R.; Robson, J.; Lorimer, G. Materials Science and Engineering: A, Vol. 485, Issue 1-2 https://doi.org/10.1016/j.msea.2007.08.016	journal	June 2008
Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet Jain, A.; Duygulu, O.; Brown, D. W. Materials Science and Engineering: A, Vol. 486, Issue 1-2 https://doi.org/10.1016/j.msea.2007.09.069	journal	July 2008
Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion Kai, Masaaki; Horita, Zenji; Langdon, Terence G. Materials Science and Engineering: A, Vol. 488, Issue 1-2 https://doi.org/10.1016/j.msea.2007.12.046	journal	August 2008
Dynamic recrystallization during high temperature deformation of magnesium Al-Samman, T.; Gottstein, G. Materials Science and Engineering: A, Vol. 490, Issue 1-2 https://doi.org/10.1016/j.msea.2008.02.004	journal	August 2008
Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation Xu, S. W.; Kamado, S.; Matsumoto, N. Materials Science and Engineering: A, Vol. 527, Issue 1-2 https://doi.org/10.1016/j.msea.2009.08.062	journal	December 2009
High strain rate superplasticity in friction stir processed ultrafine grained Mg–Al–Zn alloys Mohan, A.; Yuan, W.; Mishra, R. S. Materials Science and Engineering: A, Vol. 562 https://doi.org/10.1016/j.msea.2012.11.026	journal	February 2013
Evolution in hardness and texture of a ZK60A magnesium alloy processed by high-pressure torsion Lee, Han-Joo; Lee, Sang Kyung; Jung, Ki Ho Materials Science and Engineering: A, Vol. 630 https://doi.org/10.1016/j.msea.2015.02.011	journal	April 2015
Enhanced ductility in strongly textured magnesium produced by equal channel angular processing Agnew, S. R.; Horton, J. A.; Lillo, T. M. Scripta Materialia, Vol. 50, Issue 3 https://doi.org/10.1016/j.scriptamat.2003.10.006	journal	February 2004
Relationship between grain size and Zener–Holloman parameter during friction stir processing in AZ31 Mg alloys Chang, C. I.; Lee, C. J.; Huang, J. C. Scripta Materialia, Vol. 51, Issue 6 https://doi.org/10.1016/j.scriptamat.2004.05.043	journal	September 2004
Grain refinement of Mg–Al–Zn alloys via accumulative roll bonding Pérez-Prado, M. T.; Valle, del; Ruano, O. A. Scripta Materialia, Vol. 51, Issue 11 https://doi.org/10.1016/j.scriptamat.2004.07.028	journal	November 2004
Texture variation and its influence on the tensile behavior of a friction-stir processed magnesium alloy Woo, W.; Choo, H.; Brown, D. W. Scripta Materialia, Vol. 54, Issue 11 https://doi.org/10.1016/j.scriptamat.2006.02.019	journal	June 2006
Producing nanograined microstructure in Mg–Al–Zn alloy by two-step friction stir processing Chang, C.; Du, X.; Huang, J. Scripta Materialia, Vol. 59, Issue 3 https://doi.org/10.1016/j.scriptamat.2008.04.003	journal	August 2008
Influence of thermo-mechanical parameters on texture and tensile behavior of friction stir processed Mg alloy Yu, Zhenzhen; Choo, Hahn; Feng, Zhili Scripta Materialia, Vol. 63, Issue 11 https://doi.org/10.1016/j.scriptamat.2010.08.016	journal	November 2010
Influence of twinning on the grain refinement during high-temperature deformation in a magnesium alloy Yu, Zhenzhen; Choo, Hahn Scripta Materialia, Vol. 64, Issue 5 https://doi.org/10.1016/j.scriptamat.2010.11.009	journal	March 2011
The plastic deformation of polycrystalline aggregates Armstrong, R.; Codd, I.; Douthwaite, R. M. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 7, Issue 73 https://doi.org/10.1080/14786436208201857	journal	January 1962
The Deformation and Ageing of Mild Steel: III Discussion of Results Hall, E. O. Proceedings of the Physical Society. Section B, Vol. 64, Issue 9 https://doi.org/10.1088/0370-1301/64/9/303	journal	September 1951
Texture analysis from synchrotron diffraction images with the Rietveld method: dinosaur tendon and salmon scale Lonardelli, Ivan; Wenk, Hans-Rudolf; Lutterotti, Luca Journal of Synchrotron Radiation, Vol. 12, Issue 3 https://doi.org/10.1107/S090904950500138X	journal	April 2005
Weight Loss with Magnesium Alloys Pollock, T. M. Science, Vol. 328, Issue 5981 https://doi.org/10.1126/science.1182848	journal	May 2010
Behaviour of AZ31 magnesium alloy during compression at elevated temperatures Guo, Q.; Yan, H. G.; Zhang, H. Materials Science and Technology, Vol. 21, Issue 11 https://doi.org/10.1179/174328405X62387	journal	November 2005
On the Nonbasal Slip in Magnesium Crystals Yoshinaga, Hideo; Horiuchi, Ryo Transactions of the Japan Institute of Metals, Vol. 5, Issue 1 https://doi.org/10.2320/matertrans1960.5.14	journal	January 1964
Achieving ultra-fine grains in AZ61 Mg alloy by friction stir processing Du, Xinghao; Zhang, Erlin; Wu, Baolin International Journal of Materials Research, Vol. 99, Issue 12 https://doi.org/10.3139/146.101776	journal	December 2008
Effect of Grain Size on the Deformation and Dynamic Recrystallization of Mg-3Al-1Zn Barnett, Matthew R.; Atwell, D.; Beer, Aiden G. Materials Science Forum, Vol. 467-470 https://doi.org/10.4028/www.scientific.net/MSF.467-470.435	journal	October 2004
Texture Analysis with MTEX – Free and Open Source Software Toolbox Bachmann, F.; Hielscher, Ralf; Schaeben, Helmut Solid State Phenomena, Vol. 160 https://doi.org/10.4028/www.scientific.net/SSP.160.63	journal	February 2010

Similar Records

Formability of a wrought Mg alloy evaluated by impression testing

Journal Article · Tue Jan 16 23:00:00 EST 2018 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1420060

A Flow Stress Formulation of Magnesium Alloy at Elevated Temperature

Journal Article · Thu May 17 00:00:00 EDT 2007 · AIP Conference Proceedings · OSTI ID:21057358

Related Subjects

36 MATERIALS SCIENCE
Dynamic recrystallization
Grain refinement
Hall Petch relationship
Magnesium alloy
Texture modification

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Citation Formats

References (66)

Similar Records

Related Subjects