Multimodal Analysis of Reaction Pathways of Cathode Materials for Lithium Ion Batteries
- Brookhaven National Lab. (BNL), Upton, NY (United States)
- Univ. of Maryland, College Park, MD (United States)
Conversion mechanism in lithium ion batteries provides higher capacity than intercalation mechanism since multiple numbers of electrons and lithium ions are associated. However, poor cycling stability, large voltage hysteresis, and low energy efficiency have been great challenges of conversion reaction. To address those issues, conversion-type electrode materials have been reformed via doping or substituting other elements. For example, iron fluorides (FeF2, FeF3) have modified as iron oxyfluorides (FeF1-xOx), showing enhanced long-term stability. Furthermore, co-substituted (both anion and cation substituted) Fe0.9Co0.1OF (FeCoOF) was demonstrated excellent cycling stability. (capacity of 350 mAh g-1 at a current of 500 mA g-1 for 1000 cycles). Substituting anion and cation in iron fluoride has been suggested as an effective method to achieve better reversibility but understanding of lithiation reactions in co-substituted FeCoOF is not clear. This work takes advantage of ex-situ/ in-situ synchrotron X-ray based techniques and transmission electron microscopy to elucidate structural changes with lithium ion, which may provide fundamental insights into modifying conversion-type materials. Figure 1 presents discharge-charge curves and pair distribution function patterns acquired at each potential. As lithium ions were inserted, structural changes were noticed both at short-range and long-range. However, long-range ordering was nearly maintained even at 1 V, indicating absence of conversion reaction. Figure 2 shows lithiation induced structural evolution of a single FeCoOF nanorod observed in real time. As lithiation proceeds, the width of nanorods shows a stepwise increase, particularly A in figure 2d, which may indicate multiple steps of lithiation occur. Considering that conversion reaction takes place around 2 V in FeF3, co-substitution Co and O into iron fluoride may change thermodynamic features of lithiation reactions by lowering the initiation potential for conversion reaction. Instead, phase transformations occur at long-range order, which may help maintaining structural integrity during operation, eventually, achieving cycling stability.
- Research Organization:
- Brookhaven National Lab. (BNL), Upton, NY (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), Basic Energy Sciences (BES)
- Grant/Contract Number:
- SC0012704
- OSTI ID:
- 1781505
- Report Number(s):
- BNL-221341-2021-JAAM
- Journal Information:
- Microscopy and Microanalysis, Vol. 26, Issue S2; ISSN 1431-9276
- Publisher:
- Microscopy Society of America (MSA)Copyright Statement
- Country of Publication:
- United States
- Language:
- English
High energy-density and reversibility of iron fluoride cathode enabled via an intercalation-extrusion reaction
|
journal | June 2018 |
Structural phase transformation and Fe valence evolution in FeOxF2−x/C nanocomposite electrodes during lithiation and de-lithiation processes
|
journal | January 2013 |
Structure Stabilization by Mixed Anions in Oxyfluoride Cathodes for High-Energy Lithium Batteries
|
journal | September 2015 |
Carbon Metal Fluoride Nanocomposites: High-Capacity Reversible Metal Fluoride Conversion Materials as Rechargeable Positive Electrodes for Li Batteries
|
journal | January 2003 |
Similar Records
Revisiting Conversion Reaction Mechanisms in Lithium Batteries: Lithiation-Driven Topotactic Transformation in FeF2
Structure Stabilization by Mixed Anions in Oxyfluoride Cathodes for High-Energy Lithium Batteries