Electromagnetic Shielding Design for 200 kW Stationary Wireless Charging of Light-Duty EV

Conference · Thu Oct 01 00:00:00 EDT 2020

DOI:https://doi.org/10.1109/ECCE44975.2020.9235329· OSTI ID:1706253

Zhang, Bo ^[1]; Carlson, Richard B. ^[1]; Galigekere, Veda Prakash ^[2]; Onar, Omer ^[2]; Pries, Jason ^[2]

---

1. Idaho National Laboratory (INL)
2. ORNL

Wireless power transfer (WPT) is a developing technology with the advantage of convenience and flexible charging. SAE recommended practice J2954 defines typical size and geometry with aluminum or ferrite plate shielding to limit leakage electromagnetic (EM) fields for WPT with power levels lower than 22 kVA from the input side. However, as the WPT power goes up to 100- or 200-kW level, EM safety surrounding the WPT becomes a critical concern. To address this oncoming safety challenge, a novel ferrite shielding design is proposed in this paper. Different misalignment scenarios in accordance with definitions in SAE J2954 are also taken into consideration to ensure EM safety under various operation scenarios. Simulation results, which are preliminarily verified by magnetic field measurements at 1.1 m from the center of the vehicle side coil under 100 kW operation, indicate that the magnetic field leakage can be maintained below the limits defined in SAE J2954 for 200 kW operation. A 3.3 kW scale-down test was also carried out and compared to parallel scale-down simulations. 26.8% field emission reduction is observed from the scale-down test, which supports the effectiveness of the proposed shielding design.

• Research Organization: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
• Sponsoring Organization: USDOE; USDOE Office of Energy Efficiency and Renewable Energy (EERE)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 1706253
• Country of Publication: United States
• Language: English