Heterostructured materials: superior properties from hetero-zone interaction

Zhu, Yuntian; Ameyama, Kei; Anderson, Peter M.; Beyerlein, Irene J.; Gao, Huajian; Kim, Hyoung Seop; Lavernia, Enrique; Mathaudhu, Suveen; Mughrabi, Hael; Ritchie, Robert O.; Tsuji, Nobuhiro; Zhang, Xiangyi; Wu, Xiaolei

doi:10.1080/21663831.2020.1796836

Heterostructured materials: superior properties from hetero-zone interaction

Journal Article · Sun Sep 27 00:00:00 EDT 2020 · Materials Research Letters

DOI:https://doi.org/10.1080/21663831.2020.1796836· OSTI ID:1668097

Zhu, Yuntian ^[1]; Ameyama, Kei ^[2]; Anderson, Peter M. ^[3]; Beyerlein, Irene J. ^[4]; Gao, Huajian ^[5]; ^[6]; Lavernia, Enrique ^[7]; Mathaudhu, Suveen ^[8]; Mughrabi, Hael ^[9]; Ritchie, Robert O. ^[10]; ^[11]; Zhang, Xiangyi ^[12]; Wu, Xiaolei ^[13]

Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC, USA, Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong, China
Department of Mechanical Engineering, Ritsumeikan University, Kusatsu, Shiga, Japan
Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA
Department of Mechanical Engineering, University of California, Santa Barbara, CA, USA, Materials Department, University of California, Santa Barbara, CA, USA
School of Mechanical and Aerospace Engineering, College of Engineering, Nanyang Technological University, Singapore, Singapore, Institute of High Performance Computing, A*STAR, Singapore, Singapore
Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea
Department of Materials Science and Engineering, University of California, Irvine, CA, USA
Department of Mechanical Engineering, University of California, Riverside, CA, USA
Department of Materials Science and Engineering, Werkstoffwissenschaften I, University Erlangen-Nürnberg Erlangen, Germany
Materials Sciences Division, Lawrence Berkeley National Laboratory, and Department of Materials Science and Engineering, University of California, Berkeley, CA, USA
Department of Materials Science and Engineering, Kyoto University, Kyoto, Japan
State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao, People’s Republic of China
State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing, People’s Republic of China, School of Engineering Science, University of Chinese Academy of Sciences, Beijing, People’s Republic of China

Not Available

View Journal Article

Research Organization:: Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

Sponsoring Organization:: Japan Society for the Promotion of Science (JSPS); National Natural Science Foundation of China (NSFC); National Research Foundation of Korea (NRF); National Science Foundation (NSF); USDOE; USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: AC02-05CH11231; SC0001258

OSTI ID:: 1668097

Alternate ID(s):: OSTI ID: 1782203

Journal Information:: Materials Research Letters, Journal Name: Materials Research Letters Journal Issue: 1 Vol. 9; ISSN 2166-3831

Publisher:: Informa UK LimitedCopyright Statement

Country of Publication:: United Kingdom

Language:: English

References (222)

Importance of Bimodal Structure Topology in the Control of Mechanical Properties of a Stainless Steel: Importance of Bimodal Structure Topology … Zhang, Zhe; Orlov, Dmitry; Vajpai, Sanjay Kumar Advanced Engineering Materials, Vol. 17, Issue 6 https://doi.org/10.1002/adem.201400358	journal	September 2014
Microstructures and Mechanical Properties of a Gradient Nanostructured 316L Stainless Steel Processed by Rotationally Accelerated Shot Peening Li, Jian-Sheng; Gao, Wei-Dong; Cao, Yang Advanced Engineering Materials, Vol. 20, Issue 10 https://doi.org/10.1002/adem.201800402	journal	July 2018
Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding Leu, Brandon; Savage, Daniel J.; Wang, Jiaxiang Advanced Engineering Materials, Vol. 22, Issue 1 https://doi.org/10.1002/adem.201900673	journal	August 2019
High Tensile Ductility and Strength in Bulk Nanostructured Nickel Zhao, Yonghao; Topping, Troy; Bingert, John F. Advanced Materials, Vol. 20, Issue 16 https://doi.org/10.1002/adma.200800214	journal	August 2008
Design of Radiation Tolerant Materials Via Interface Engineering Han, Weizhong; Demkowicz, Michael J.; Mara, Nathan A. Advanced Materials, Vol. 25, Issue 48 https://doi.org/10.1002/adma.201303400	journal	September 2013
High-Strength and High-Ductility Nanostructured and Amorphous Metallic Materials Kou, Hongning; Lu, Jian; Li, Ying Advanced Materials, Vol. 26, Issue 31 https://doi.org/10.1002/adma.201401595	journal	June 2014
Novel Bimorphological Anisotropic Bulk Nanocomposite Materials with High Energy Products Li, Xiaohong; Lou, Li; Song, Wenpeng Advanced Materials, Vol. 29, Issue 16 https://doi.org/10.1002/adma.201606430	journal	February 2017
Metal Oxide Nanocomposites: A Perspective from Strain, Defect, and Interface Chen, Aiping; Su, Qing; Han, Hyungkyu Advanced Materials, Vol. 31, Issue 4 https://doi.org/10.1002/adma.201803241	journal	October 2018
Engineering Bulk, Layered, Multicomponent Nanostructures with High Energy Density Huang, Guangwei; Li, Xiaohong; Lou, Li Small, Vol. 14, Issue 22 https://doi.org/10.1002/smll.201800619	journal	May 2018
Synthesis of bulk nanocrystalline nickel by pulsed electrodeposition El-Sherik, A. M.; Erb, U. Journal of Materials Science, Vol. 30, Issue 22 https://doi.org/10.1007/BF00356715	journal	November 1995
Nanoscale brass/steel multilayer composites produced by cold rolling Sahay, Satyam S.; Ravichandran, Kakkaveri S.; Byrne, J. Gerald Metallurgical and Materials Transactions A, Vol. 27, Issue 8 https://doi.org/10.1007/BF02651893	journal	August 1996
Mechanical properties of thin films Nix, William D. Metallurgical Transactions A, Vol. 20, Issue 11 https://doi.org/10.1007/BF02666659	journal	November 1989
Formation of a nanocrystalline surface layer on steels by air blast shot peening Liu, J. L.; Umemoto, M.; Todaka, Y. Journal of Materials Science, Vol. 42, Issue 18 https://doi.org/10.1007/s10853-007-1659-x	journal	September 2007
Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders Sawangrat, Choncharoen; Kato, Shota; Orlov, Dmitry Journal of Materials Science, Vol. 49, Issue 19 https://doi.org/10.1007/s10853-014-8258-4	journal	May 2014
Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure Li, Jiansheng; Cao, Yang; Gao, Bo Journal of Materials Science, Vol. 53, Issue 14 https://doi.org/10.1007/s10853-018-2322-4	journal	April 2018
New discoveries in deformed metals Hansen, Niels; Mehl, Robert F.; Medalist, Award Metallurgical and Materials Transactions A, Vol. 32, Issue 12 https://doi.org/10.1007/s11661-001-0167-x	journal	December 2001
Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy Tellkamp, V. L.; Lavernia, E. J.; Melmed, A. Metallurgical and Materials Transactions A, Vol. 32, Issue 9 https://doi.org/10.1007/s11661-001-0207-6	journal	September 2001
Deformation behavior of bimodal nanostructured 5083 Al alloys Han, B. O.; Lavernia, E. J.; Lee, Z. Metallurgical and Materials Transactions A, Vol. 36, Issue 4 https://doi.org/10.1007/s11661-005-0289-7	journal	April 2005
The Development of High Performance Ti-6Al-4V Alloy via a Unique Microstructural Design with Bimodal Grain Size Distribution Vajpai, Sanjay Kumar; Ota, Mie; Watanabe, Tomoyuki Metallurgical and Materials Transactions A, Vol. 46, Issue 2 https://doi.org/10.1007/s11661-014-2649-7	journal	November 2014
Reinforcement Size Dependence of Load Bearing Capacity in Ultrafine-Grained Metal Matrix Composites Yang, Hanry; Jiang, Lin; Balog, Martin Metallurgical and Materials Transactions A, Vol. 48, Issue 9 https://doi.org/10.1007/s11661-017-4186-7	journal	July 2017
Structure and Property of Interfaces in ARB Cu/Nb Laminated Composites Wang, J.; Kang, K.; Zhang, R. F. JOM, Vol. 64, Issue 10 https://doi.org/10.1007/s11837-012-0429-7	journal	August 2012
The Microstructural Design of Trimodal Aluminum Composites Jiang, Lin; Ma, Kaka; Yang, Hanry JOM, Vol. 66, Issue 6 https://doi.org/10.1007/s11837-014-0906-2	journal	April 2014
Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness Snel, J.; Monclús, M. A.; Castillo-Rodríguez, M. JOM, Vol. 69, Issue 11 https://doi.org/10.1007/s11837-017-2533-1	journal	August 2017
On the rule-of-mixtures of the hardening parameters in TWIP-cored three-layer steel sheet Kim, Jung Gi; Baek, Seung Mi; Cho, Won Tae Metals and Materials International, Vol. 23, Issue 3 https://doi.org/10.1007/s12540-017-6674-0	journal	April 2017
Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels Yoon, Jae Ik; Jung, Jaimyun; Lee, Hak Hyeon Metals and Materials International, Vol. 25, Issue 5 https://doi.org/10.1007/s12540-019-00270-x	journal	April 2019
A study of the bauschinger effect in AlCu alloys Moan, G. D.; Embury, J. D. Acta Metallurgica, Vol. 27, Issue 5 https://doi.org/10.1016/0001-6160(79)90125-1	journal	May 1979
Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals Mughrabi, H. Acta Metallurgica, Vol. 31, Issue 9 https://doi.org/10.1016/0001-6160(83)90007-X	journal	September 1983
Image forces on screw dislocations in multilayer structures Kamat, S. V.; Hirth, J. P.; Carnahan, B. Scripta Metallurgica, Vol. 21, Issue 11 https://doi.org/10.1016/0036-9748(87)90306-1	journal	November 1987
Overview no. 96 evolution of f.c.c. deformation structures in polyslip Bay, B.; Hansen, N.; Hughes, D. A. Acta Metallurgica et Materialia, Vol. 40, Issue 2 https://doi.org/10.1016/0956-7151(92)90296-Q	journal	February 1992
Strain gradient plasticity: Theory and experiment Fleck, N. A.; Muller, G. M.; Ashby, M. F. Acta Metallurgica et Materialia, Vol. 42, Issue 2 https://doi.org/10.1016/0956-7151(94)90502-9	journal	February 1994
Metallic multilayers at the nanoscale Jankowski, Alan F. Nanostructured Materials, Vol. 6, Issue 1-4 https://doi.org/10.1016/0965-9773(95)00041-0	journal	January 1995
Hall-Petch relations for multilayered materials Anderson, P. M.; Li, C. Nanostructured Materials, Vol. 5, Issue 3 https://doi.org/10.1016/0965-9773(95)00250-I	journal	March 1995
Mechanism-based strain gradient plasticity? I. Theory Gao, H. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 6 https://doi.org/10.1016/S0022-5096(98)00103-3	journal	April 1999
Bulk nanostructured materials from severe plastic deformation Valiev, R. Z.; Islamgaliev, R. K.; Alexandrov, I. V. Progress in Materials Science, Vol. 45, Issue 2 https://doi.org/10.1016/S0079-6425(99)00007-9	journal	March 2000
Mechanical alloying and milling Suryanarayana, C. Progress in Materials Science, Vol. 46, Issue 1-2, p. 1-184 https://doi.org/10.1016/S0079-6425(99)00010-9	journal	January 2001
On the role of strain gradients and long-range internal stresses in the composite model of crystal plasticity Mughrabi, H. Materials Science and Engineering: A, Vol. 317, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)01173-X	journal	October 2001
Microstructure and strength of nickel at large strains Hughes, D. A.; Hansen, N. Acta Materialia, Vol. 48, Issue 11 https://doi.org/10.1016/S1359-6454(00)00082-3	journal	June 2000
Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening Huang, J. Y.; Zhu, Y. T.; Jiang, H. Acta Materialia, Vol. 49, Issue 9 https://doi.org/10.1016/S1359-6454(01)00069-6	journal	May 2001
Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process Saito, Y.; Utsunomiya, H.; Tsuji, N. Acta Materialia, Vol. 47, Issue 2 https://doi.org/10.1016/S1359-6454(98)00365-6	journal	January 1999
Nanoscale steel-brass multilayer laminates made by cold rolling: microstructure and tensile properties Kavarana, F. H.; Ravichandran, K. S.; Sahay, S. S. Scripta Materialia, Vol. 42, Issue 10 https://doi.org/10.1016/S1359-6462(00)00318-3	journal	April 2000
Geometrically necessary dislocation and size-dependent plasticity Gao, Huajian; Huang, Yonggang Scripta Materialia, Vol. 48, Issue 2 https://doi.org/10.1016/S1359-6462(02)00329-9	journal	January 2003
High cycle fatigue of thin silver films investigated by dynamic microbeam deflection Schwaiger, R.; Kraft, O. Scripta Materialia, Vol. 41, Issue 8 https://doi.org/10.1016/S1359-6462(99)00231-6	journal	September 1999
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites Misra, A.; Hirth, J. P.; Hoagland, R. G. Acta Materialia, Vol. 53, Issue 18 https://doi.org/10.1016/j.actamat.2005.06.025	journal	October 2005
Crystallographic features of lath martensite in low-carbon steel Kitahara, Hiromoto; Ueji, Rintaro; Tsuji, Nobuhiro Acta Materialia, Vol. 54, Issue 5 https://doi.org/10.1016/j.actamat.2005.11.001	journal	March 2006
Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys Han, B. Q.; Huang, J. Y.; Zhu, Y. T. Acta Materialia, Vol. 54, Issue 11 https://doi.org/10.1016/j.actamat.2006.02.045	journal	June 2006
Transmission of a screw dislocation across a coherent, slipping interface Shen, Y.; Anderson, P. Acta Materialia, Vol. 54, Issue 15 https://doi.org/10.1016/j.actamat.2006.04.026	journal	September 2006
Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel Lin, Yimin; Lu, Jian; Wang, Liping Acta Materialia, Vol. 54, Issue 20 https://doi.org/10.1016/j.actamat.2006.08.014	journal	December 2006
Tailoring and patterning the grain size of nanocrystalline alloys Detor, A.; Schuh, C. Acta Materialia, Vol. 55, Issue 1 https://doi.org/10.1016/j.actamat.2006.08.032	journal	January 2007
A microstructural investigation of the surface of a drilled hole in carbon steels Li, J. G.; Umemoto, M.; Todaka, Y. Acta Materialia, Vol. 55, Issue 4 https://doi.org/10.1016/j.actamat.2006.09.043	journal	February 2007
The stress–strain response of nanocrystalline metals: A statistical analysis of atomistic simulations Bitzek, E.; Derlet, P. M.; Anderson, P. M. Acta Materialia, Vol. 56, Issue 17 https://doi.org/10.1016/j.actamat.2008.05.043	journal	October 2008
The stress–strain response of nanocrystalline metals: A quantized crystal plasticity approach Li, L.; Anderson, P.; Lee, M. Acta Materialia, Vol. 57, Issue 3 https://doi.org/10.1016/j.actamat.2008.10.035	journal	February 2009
A critical assessment of theories of strain gradient plasticity Evans, A. G.; Hutchinson, J. W. Acta Materialia, Vol. 57, Issue 5 https://doi.org/10.1016/j.actamat.2008.12.012	journal	March 2009
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications Roters, F.; Eisenlohr, P.; Hantcherli, L. Acta Materialia, Vol. 58, Issue 4 https://doi.org/10.1016/j.actamat.2009.10.058	journal	February 2010
Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging Calcagnotto, Marion; Adachi, Yoshitaka; Ponge, Dirk Acta Materialia, Vol. 59, Issue 2 https://doi.org/10.1016/j.actamat.2010.10.002	journal	January 2011
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper Singh, A.; Tang, L.; Dao, M. Acta Materialia, Vol. 59, Issue 6 https://doi.org/10.1016/j.actamat.2010.12.043	journal	April 2011
Bulk texture evolution of Cu–Nb nanolamellar composites during accumulative roll bonding Carpenter, J. S.; Vogel, S. C.; LeDonne, J. E. Acta Materialia, Vol. 60, Issue 4 https://doi.org/10.1016/j.actamat.2011.11.045	journal	February 2012
Achieving maximum hardness in semi-coherent multilayer thin films with unequal layer thickness Carpenter, John S.; Misra, Amit; Anderson, Peter M. Acta Materialia, Vol. 60, Issue 6-7 https://doi.org/10.1016/j.actamat.2012.01.029	journal	April 2012
Slip-induced intergranular stress redistribution in nanocrystalline Ni Li, Lin; Van Petegem, Steven; Van Swygenhoven, Helena Acta Materialia, Vol. 60, Issue 20 https://doi.org/10.1016/j.actamat.2012.09.007	journal	December 2012
Grain boundary complexions Cantwell, Patrick R.; Tang, Ming; Dillon, Shen J. Acta Materialia, Vol. 62 https://doi.org/10.1016/j.actamat.2013.07.037	journal	January 2014
Mapping dislocation nucleation behavior from bimetal interfaces Beyerlein, Irene J.; Wang, Jian; Zhang, Ruifeng Acta Materialia, Vol. 61, Issue 19 https://doi.org/10.1016/j.actamat.2013.08.061	journal	November 2013
Deformation and failure of shocked bulk Cu–Nb nanolaminates Han, W. Z.; Cerreta, E. K.; Mara, N. A. Acta Materialia, Vol. 63 https://doi.org/10.1016/j.actamat.2013.10.019	journal	January 2014
Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding Carpenter, J. S.; Nizolek, T.; McCabe, R. J. Acta Materialia, Vol. 92 https://doi.org/10.1016/j.actamat.2015.03.020	journal	June 2015
An indentation-based method to determine constituent strengths within nanolayered composites Gram, Michael D.; Carpenter, John S.; Anderson, Peter M. Acta Materialia, Vol. 92 https://doi.org/10.1016/j.actamat.2015.04.002	journal	June 2015
High strength and thermal stability of bulk Cu/Ta nanolamellar multilayers fabricated by cross accumulative roll bonding Zeng, L. F.; Gao, R.; Fang, Q. F. Acta Materialia, Vol. 110 https://doi.org/10.1016/j.actamat.2016.03.034	journal	May 2016
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility Wu, X. L.; Yang, M. X.; Yuan, F. P. Acta Materialia, Vol. 112 https://doi.org/10.1016/j.actamat.2016.04.045	journal	June 2016
The plasticity of highly oriented nano-layered Zr/Nb composites Ardeljan, Milan; Savage, Daniel J.; Kumar, Anil Acta Materialia, Vol. 115 https://doi.org/10.1016/j.actamat.2016.05.058	journal	August 2016
Mechanical properties of copper/bronze laminates: Role of interfaces Ma, Xiaolong; Huang, Chongxiang; Moering, Jordan Acta Materialia, Vol. 116 https://doi.org/10.1016/j.actamat.2016.06.023	journal	September 2016
Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels Zhu, Linli; Ruan, Haihui; Chen, Aiying Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.035	journal	April 2017
Mechanical properties and optimal grain size distribution profile of gradient grained nickel Lin, Y.; Pan, J.; Zhou, H. F. Acta Materialia, Vol. 153 https://doi.org/10.1016/j.actamat.2018.04.065	journal	July 2018
Defect-interface interactions in irradiated Cu/Ag nanocomposites Wang, Min; Beyerlein, Irene J.; Zhang, Jian Acta Materialia, Vol. 160 https://doi.org/10.1016/j.actamat.2018.09.003	journal	November 2018
Stronger and more failure-resistant with three-dimensional serrated bimetal interfaces Kong, X. F.; Beyerlein, I. J.; Liu, Z. R. Acta Materialia, Vol. 166 https://doi.org/10.1016/j.actamat.2018.12.051	journal	March 2019
Simultaneous enhancement of stress- and strain-controlled fatigue properties in 316L stainless steel with gradient nanostructure Lei, Y. B.; Wang, Z. B.; Xu, J. L. Acta Materialia, Vol. 168 https://doi.org/10.1016/j.actamat.2019.02.008	journal	April 2019
Creep resistance of bulk copper–niobium composites: An inverse effect of multilayer length scale Avallone, Jaclyn T.; Nizolek, Thomas J.; Bales, Benjamin B. Acta Materialia, Vol. 176 https://doi.org/10.1016/j.actamat.2019.06.029	journal	September 2019
On the impact toughness of gradient-structured metals Lin, Yan; Yu, Qin; Pan, Jie Acta Materialia, Vol. 193 https://doi.org/10.1016/j.actamat.2020.04.027	journal	July 2020
An overview of interface-dominated deformation mechanisms in metallic multilayers Wang, J.; Misra, A. Current Opinion in Solid State and Materials Science, Vol. 15, Issue 1 https://doi.org/10.1016/j.cossms.2010.09.002	journal	February 2011
Interface-dominant multilayers fabricated by severe plastic deformation: Stability under extreme conditions Mara, Nathan A.; Beyerlein, Irene J. Current Opinion in Solid State and Materials Science, Vol. 19, Issue 5 https://doi.org/10.1016/j.cossms.2015.04.002	journal	October 2015
Gradient plasticity in gradient nano-grained metals Zeng, Zhi; Li, Xiaoyan; Xu, Dongsheng Extreme Mechanics Letters, Vol. 8 https://doi.org/10.1016/j.eml.2015.12.005	journal	September 2016
Research on friction and wear behavior of gradient nano-structured 40Cr steel induced by high frequency impacting and rolling Zhao, Xiaohui; Zhao, Bo; Liu, Yu Engineering Failure Analysis, Vol. 83 https://doi.org/10.1016/j.engfailanal.2017.09.012	journal	January 2018
Microstructure and texture evolution in Mg/Nb layered materials made by accumulative roll bonding Savage, Daniel J.; Beyerlein, Irene J.; Mara, Nathan A. International Journal of Plasticity, Vol. 125 https://doi.org/10.1016/j.ijplas.2019.08.015	journal	February 2020
Predicting the size scaling in strength of nanolayered materials by a discrete slip crystal plasticity model Chen, Tianju; Yuan, Rui; Beyerlein, Irene J. International Journal of Plasticity, Vol. 124 https://doi.org/10.1016/j.ijplas.2019.08.016	journal	January 2020
Multiple mechanism based constitutive modeling of gradient nanograined material Zhao, Jianfeng; Lu, Xiaochong; Yuan, Fuping International Journal of Plasticity, Vol. 125 https://doi.org/10.1016/j.ijplas.2019.09.018	journal	February 2020
Micro-structural evaluation of Cu/Nb nano-layered composites produced by repeated press and rolling process Shahabi, H. Sh.; Manesh, H. Danesh Journal of Alloys and Compounds, Vol. 482, Issue 1-2 https://doi.org/10.1016/j.jallcom.2009.04.067	journal	August 2009
Evolution of texture and microstructure in pulsed electro-deposited Cu treated by Surface Mechanical Attrition Treatment (SMAT) Blonde, Romain; Chan, Hoi-Lam; Allain-Bonasso, Nathalie Journal of Alloys and Compounds, Vol. 504 https://doi.org/10.1016/j.jallcom.2010.04.040	journal	August 2010
Gradient Structured Copper by Rotationally Accelerated Shot Peening Wang, X.; Li, Y. S.; Zhang, Q. Journal of Materials Science & Technology, Vol. 33, Issue 7 https://doi.org/10.1016/j.jmst.2016.11.006	journal	July 2017
Fabrication of nanostructure in inner-surface of AISI 304 stainless steel pipe with surface plastic deformation Zhang, Hongwang; Zhao, Yiming; Wang, Yuhui Journal of Materials Science & Technology, Vol. 34, Issue 11 https://doi.org/10.1016/j.jmst.2018.05.012	journal	November 2018
Crystallographic analysis of plate martensite in Fe–28.5 at.% Ni by FE-SEM/EBSD Kitahara, Hiromoto; Ueji, Rintaro; Ueda, Masato Materials Characterization, Vol. 54, Issue 4-5 https://doi.org/10.1016/j.matchar.2004.12.015	journal	May 2005
Strengthening and toughening austenitic steel by introducing gradient martensite via cyclic forward/reverse torsion Guo, Ning; Zhang, Zhimin; Dong, Qingshan Materials & Design, Vol. 143 https://doi.org/10.1016/j.matdes.2018.01.058	journal	April 2018
Interface affected zone for optimal strength and ductility in heterogeneous laminate Huang, C. X.; Wang, Y. F.; Ma, X. L. Materials Today, Vol. 21, Issue 7 https://doi.org/10.1016/j.mattod.2018.03.006	journal	September 2018
On the exceptional damage-tolerance of gradient metallic materials Cao, Ruqing; Yu, Qin; Pan, Jie Materials Today, Vol. 32 https://doi.org/10.1016/j.mattod.2019.09.023	journal	January 2020
Formation of nanocrystalline structure in carbon steels by ball drop and particle impact techniques Umemoto, M.; Todaka, Y.; Tsuchiya, K. Materials Science and Engineering: A, Vol. 375-377 https://doi.org/10.1016/j.msea.2003.10.198	journal	July 2004
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment Lu, K.; Lu, J. Materials Science and Engineering: A, Vol. 375-377 https://doi.org/10.1016/j.msea.2003.10.261	journal	July 2004
Effect of annealing on the strength of Ag/Fe and Ag/Ni super-laminates produced by foil metallurgy Yasuda, M.; Kikuchi, S. Materials Science and Engineering: A, Vol. 387-389 https://doi.org/10.1016/j.msea.2004.02.096	journal	December 2004
Nanocrystalline structure formation in carbon steel introduced by high speed drilling Li, J. G.; Umemoto, M.; Todaka, Y. Materials Science and Engineering: A, Vol. 435-436 https://doi.org/10.1016/j.msea.2006.07.036	journal	November 2006
Cryomilled nanostructured materials: Processing and properties Lavernia, E. J.; Han, B. Q.; Schoenung, J. M. Materials Science and Engineering: A, Vol. 493, Issue 1-2 https://doi.org/10.1016/j.msea.2007.06.099	journal	October 2008
Mechanical properties of sputtered Cu/V and Al/Nb multilayer films Fu, E. G.; Li, Nan; Misra, A. Materials Science and Engineering: A, Vol. 493, Issue 1-2 https://doi.org/10.1016/j.msea.2007.07.101	journal	October 2008
Length scale effects on recrystallization and texture evolution in Cu layers of a roll-bonded Cu–Nb composite Lim, S. C. V.; Rollett, A. D. Materials Science and Engineering: A, Vol. 520, Issue 1-2 https://doi.org/10.1016/j.msea.2009.05.020	journal	September 2009
Investigation of aluminum-based nanocomposites with ultra-high strength Li, Y.; Zhao, Y. H.; Ortalan, V. Materials Science and Engineering: A, Vol. 527, Issue 1-2 https://doi.org/10.1016/j.msea.2009.07.067	journal	December 2009
Powder metallurgical nanostructured medium carbon bainitic steel: Kinetics, structure, and in situ thermal stability studies Lonardelli, I.; Bortolotti, M.; van Beek, W. Materials Science and Engineering: A, Vol. 555 https://doi.org/10.1016/j.msea.2012.06.043	journal	October 2012
Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering Ji, Gang; Bernard, Frédéric; Launois, Sébastien Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.142	journal	January 2013
Mechanical behavior of a compositionally graded 300M steel Roumina, R.; Embury, J. D.; Bouaziz, O. Materials Science and Engineering: A, Vol. 578 https://doi.org/10.1016/j.msea.2013.04.006	journal	August 2013
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics Zhang, Zhe; Vajpai, Sanjay Kumar; Orlov, Dmitry Materials Science and Engineering: A, Vol. 598 https://doi.org/10.1016/j.msea.2014.01.023	journal	March 2014
Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel Park, Kyosun; Nishiyama, Masato; Nakada, Nobuo Materials Science and Engineering: A, Vol. 604 https://doi.org/10.1016/j.msea.2014.02.058	journal	May 2014
Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility Ye, Chang; Telang, Abhishek; Gill, Amrinder S. Materials Science and Engineering: A, Vol. 613 https://doi.org/10.1016/j.msea.2014.06.114	journal	September 2014
Length-scale-dependent mechanical behaviour of Zr/Nb multilayers as a function of individual layer thickness Frutos, E.; Callisti, M.; Karlik, M. Materials Science and Engineering: A, Vol. 632 https://doi.org/10.1016/j.msea.2015.02.071	journal	April 2015
Influence of gradient structure volume fraction on the mechanical properties of pure copper Yang, Xincheng; Ma, Xiaolong; Moering, Jordan Materials Science and Engineering: A, Vol. 645 https://doi.org/10.1016/j.msea.2015.08.037	journal	October 2015
Gradient twinned 304 stainless steels for high strength and high ductility Chen, Aiying; Liu, Jiabin; Wang, Hongtao Materials Science and Engineering: A, Vol. 667 https://doi.org/10.1016/j.msea.2016.04.070	journal	June 2016
Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature Park, Jeong Min; Moon, Jongun; Bae, Jae Wung Materials Science and Engineering: A, Vol. 746 https://doi.org/10.1016/j.msea.2019.01.041	journal	February 2019
Microstructure and mechanical properties of AISI 316L steel with an inverse gradient nanostructure fabricated by electro-magnetic induction heating Long, Q. Y.; Lu, J. X.; Fang, T. H. Materials Science and Engineering: A, Vol. 751 https://doi.org/10.1016/j.msea.2019.02.061	journal	March 2019
Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening Li, Z. K.; Fang, X. T.; Wang, Y. F. Materials Science and Engineering: A, Vol. 777 https://doi.org/10.1016/j.msea.2020.139074	journal	March 2020
Effect of bimodal harmonic structure design on the deformation behaviour and mechanical properties of Co-Cr-Mo alloy Vajpai, Sanjay Kumar; Sawangrat, Choncharoen; Yamaguchi, Osamu Materials Science and Engineering: C, Vol. 58 https://doi.org/10.1016/j.msec.2015.09.055	journal	January 2016
Quantifying the spread in crystallographic textures due to transients in strain path in shot-peening Wang, Zhiyu; Rifat, Mustafa; Saldana, Christopher Materialia, Vol. 2 https://doi.org/10.1016/j.mtla.2018.08.005	journal	October 2018
Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure Sathiyamoorthi, Praveen; Park, Jeong Min; Moon, Jongun Materialia, Vol. 8 https://doi.org/10.1016/j.mtla.2019.100442	journal	December 2019
Synthesis and mechanical behavior of nanostructured materials via cryomilling Witkin, D. B.; Lavernia, E. J. Progress in Materials Science, Vol. 51, Issue 1 https://doi.org/10.1016/j.pmatsci.2005.04.004	journal	January 2006
Electrodeposited multilayer films with giant magnetoresistance (GMR): Progress and problems Bakonyi, I.; Péter, L. Progress in Materials Science, Vol. 55, Issue 3 https://doi.org/10.1016/j.pmatsci.2009.07.001	journal	March 2010
Defect-interface interactions Beyerlein, I. J.; Demkowicz, M. J.; Misra, A. Progress in Materials Science, Vol. 74 https://doi.org/10.1016/j.pmatsci.2015.02.001	journal	October 2015
Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications Liu, Zengqian; Meyers, Marc A.; Zhang, Zhefeng Progress in Materials Science, Vol. 88 https://doi.org/10.1016/j.pmatsci.2017.04.013	journal	July 2017
Review on superior strength and enhanced ductility of metallic nanomaterials Ovid'ko, I. A.; Valiev, R. Z.; Zhu, Y. T. Progress in Materials Science, Vol. 94 https://doi.org/10.1016/j.pmatsci.2018.02.002	journal	May 2018
A tri-modal aluminum based composite with super-high strength Ye, Jichun; Han, Bing Q.; Lee, Zonghoon Scripta Materialia, Vol. 53, Issue 5 https://doi.org/10.1016/j.scriptamat.2005.05.004	journal	September 2005
Fatigue properties of nanoscale Cu/Nb multilayers Wang, Y. -C.; Misra, A.; Hoagland, R. G. Scripta Materialia, Vol. 54, Issue 9 https://doi.org/10.1016/j.scriptamat.2006.01.027	journal	May 2006
Processing dense hetero-nanostructured metallic materials by spark plasma sintering Grosdidier, Thierry; Ji, Gang; Launois, Sébastien Scripta Materialia, Vol. 57, Issue 6 https://doi.org/10.1016/j.scriptamat.2007.05.022	journal	September 2007
The role of shear strain on texture and microstructural gradients in low carbon steel processed by Surface Mechanical Attrition Treatment Moering, Jordan; Ma, Xiaolong; Chen, Guizhen Scripta Materialia, Vol. 108 https://doi.org/10.1016/j.scriptamat.2015.06.027	journal	November 2015
Strength of nanoscale metallic multilayers Subedi, Samikshya; Beyerlein, Irene J.; LeSar, Richard Scripta Materialia, Vol. 145 https://doi.org/10.1016/j.scriptamat.2017.04.009	journal	March 2018
Strength and ductility of bulk Cu/Nb nanolaminates exposed to extremely high temperatures Yang, Wenfan; Beyerlein, Irene J.; Jin, Qianqian Scripta Materialia, Vol. 166 https://doi.org/10.1016/j.scriptamat.2019.03.007	journal	June 2019
Heterostructure induced dispersive shear bands in heterostructured Cu Wang, Y. F.; Huang, C. X.; He, Q. Scripta Materialia, Vol. 170 https://doi.org/10.1016/j.scriptamat.2019.05.036	journal	September 2019
Bi-metal interface-mediated defects distribution in neon ion bombarded Cu/Ag nanocomposites Wang, Min; Beyerlein, Irene J.; Zhang, Jian Scripta Materialia, Vol. 171 https://doi.org/10.1016/j.scriptamat.2019.06.016	journal	October 2019
Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient Wang, Y. F.; Huang, C. X.; Fang, X. T. Scripta Materialia, Vol. 174 https://doi.org/10.1016/j.scriptamat.2019.08.022	journal	January 2020
Formation of nanocrystalline surface layers in various metallic materials by near surface severe plastic deformation Sato, Masahide; Tsuji, Nobuhiro; Minaminob, Yoritoshi Science and Technology of Advanced Materials, Vol. 5, Issue 1-2 https://doi.org/10.1016/j.stam.2003.10.015	journal	January 2004
Wear behaviour of nanocrystallised Hadfield steel Feng, X. Y.; Zhang, F. C.; Yang, Z. N. Wear, Vol. 305, Issue 1-2 https://doi.org/10.1016/j.wear.2012.11.038	journal	July 2013
Three-Dimensional Self-Assembly of Core/Shell-Like Nanostructures for High-Performance Nanocomposite Permanent Magnets Li, Hailing; Li, Xiaohong; Guo, Defeng Nano Letters, Vol. 16, Issue 9 https://doi.org/10.1021/acs.nanolett.6b02210	journal	August 2016
Controllably Manipulating Three-Dimensional Hybrid Nanostructures for Bulk Nanocomposites with Large Energy Products Li, Xiaohong; Lou, Li; Song, Wenpeng Nano Letters, Vol. 17, Issue 5 https://doi.org/10.1021/acs.nanolett.7b00264	journal	April 2017
The Strongest Size in Gradient Nanograined Metals Cao, Penghui Nano Letters, Vol. 20, Issue 2 https://doi.org/10.1021/acs.nanolett.9b05202	journal	December 2019
Composite for energy storage takes the heat Ploehn, Harry J. Nature, Vol. 523, Issue 7562 https://doi.org/10.1038/523536a	journal	July 2015
Stabilizing nanostructures in metals using grain and twin boundary architectures Lu, K. Nature Reviews Materials, Vol. 1, Issue 5 https://doi.org/10.1038/natrevmats.2016.19	journal	March 2016
High tensile ductility in a nanostructured metal Wang, Yinmin; Chen, Mingwei; Zhou, Fenghua Nature, Vol. 419, Issue 6910 https://doi.org/10.1038/nature01133	journal	October 2002
High-performance bulk thermoelectrics with all-scale hierarchical architectures Biswas, Kanishka; He, Jiaqing; Blum, Ivan D. Nature, Vol. 489, Issue 7416, p. 414-418 https://doi.org/10.1038/nature11439	journal	September 2012
Flexible high-temperature dielectric materials from polymer nanocomposites Li, Qi; Chen, Lei; Gadinski, Matthew R. Nature, Vol. 523, Issue 7562 https://doi.org/10.1038/nature14647	journal	July 2015
Designing switchable polarization and magnetization at room temperature in an oxide Mandal, P.; Pitcher, M. J.; Alaria, J. Nature, Vol. 525, Issue 7569 https://doi.org/10.1038/nature14881	journal	September 2015
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off Li, Zhiming; Pradeep, Konda Gokuldoss; Deng, Yun Nature, Vol. 534, Issue 7606 https://doi.org/10.1038/nature17981	journal	May 2016
History-independent cyclic response of nanotwinned metals Pan, Qingsong; Zhou, Haofei; Lu, Qiuhong Nature, Vol. 551, Issue 7679 https://doi.org/10.1038/nature24266	journal	October 2017
Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility Khalajhedayati, Amirhossein; Pan, Zhiliang; Rupert, Timothy J. Nature Communications, Vol. 7, Issue 1 https://doi.org/10.1038/ncomms10802	journal	February 2016
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy Jo, Y. H.; Jung, S.; Choi, W. M. Nature Communications, Vol. 8, Issue 1 https://doi.org/10.1038/ncomms15719	journal	June 2017
High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces Zheng, Shijian; Beyerlein, Irene J.; Carpenter, John S. Nature Communications, Vol. 4, Issue 1 https://doi.org/10.1038/ncomms2651	journal	April 2013
Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins Wei, Yujie; Li, Yongqiang; Zhu, Lianchun Nature Communications, Vol. 5, Issue 1 https://doi.org/10.1038/ncomms4580	journal	April 2014
Complex thermoelectric materials Snyder, G. Jeffrey; Toberer, Eric S. Nature Materials, Vol. 7, Issue 2, p. 105-114 https://doi.org/10.1038/nmat2090	journal	February 2008
Correlated metals as transparent conductors Zhang, Lei; Zhou, Yuanjun; Guo, Lu Nature Materials, Vol. 15, Issue 2 https://doi.org/10.1038/nmat4493	journal	December 2015
Ultrahigh piezoelectricity in ferroelectric ceramics by design Li, Fei; Lin, Dabin; Chen, Zibin Nature Materials, Vol. 17, Issue 4 https://doi.org/10.1038/s41563-018-0034-4	journal	March 2018
High piezoelectricity via enhanced disorder Malic, Barbara; Rojac, Tadej Nature Materials, Vol. 17, Issue 4 https://doi.org/10.1038/s41563-018-0046-0	journal	March 2018
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys Li, Xiaoyan; Lu, Lei; Li, Jianguo Nature Reviews Materials, Vol. 5, Issue 9 https://doi.org/10.1038/s41578-020-0212-2	journal	July 2020
Ferroelectric polymers exhibiting behaviour reminiscent of a morphotropic phase boundary Liu, Yang; Aziguli, Haibibu; Zhang, Bing Nature, Vol. 562, Issue 7725 https://doi.org/10.1038/s41586-018-0550-z	journal	October 2018
Strong, Ductile, and Thermally Stable bcc-Mg Nanolaminates Pathak, Siddhartha; Velisavljevic, Nenad; Baldwin, J. Kevin Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-08302-5	journal	August 2017
Multiscale architectured materials with composition and grain size gradients manufactured using high-pressure torsion Kang, Ji Yun; Kim, Jung Gi; Park, Hyo Wook Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/srep26590	journal	May 2016
A combined in situ optical reflectance–electron diffraction study of Co/Cu and Co/Au multilayers grown by molecular beam epitaxy Emmerson, C. M.; Shen, T‐H.; Evans, S. D. Applied Physics Letters, Vol. 68, Issue 26 https://doi.org/10.1063/1.115991	journal	June 1996
Deformation behavior and plastic instabilities of ultrafine-grained titanium Jia, D.; Wang, Y. M.; Ramesh, K. T. Applied Physics Letters, Vol. 79, Issue 5 https://doi.org/10.1063/1.1384000	journal	July 2001
Nucleation of deformation twins in nanocrystalline face-centered-cubic metals processed by severe plastic deformation Zhu, Y. T.; Liao, X. Z.; Srinivasan, S. G. Journal of Applied Physics, Vol. 98, Issue 3 https://doi.org/10.1063/1.2006974	journal	August 2005
Optical, structural, and electrical properties of Mg2NiH4 thin films in situ grown by activated reactive evaporation Westerwaal, R. J.; Slaman, M.; Broedersz, C. P. Journal of Applied Physics, Vol. 100, Issue 6 https://doi.org/10.1063/1.2349473	journal	September 2006
Thin‐Film Deposition: Principles and Practice Smith, Donald L.; Hoffman, David W. Physics Today, Vol. 49, Issue 4 https://doi.org/10.1063/1.2807590	journal	April 1996
Bulk metallic multilayers produced by repeated press-rolling and their perpendicular magnetoresistance Yasuna, K.; Terauchi, M.; Otsuki, A. Journal of Applied Physics, Vol. 82, Issue 5 https://doi.org/10.1063/1.366052	journal	September 1997
Strain rate sensitivity and activation volume of Cu/Ni metallic multilayer thin films measured via micropillar compression Carpenter, J. S.; Misra, A.; Uchic, M. D. Applied Physics Letters, Vol. 101, Issue 5 https://doi.org/10.1063/1.4739521	journal	July 2012
Minimum energy structures of faceted, incoherent interfaces Kang, K.; Wang, J.; Zheng, S. J. Journal of Applied Physics, Vol. 112, Issue 7 https://doi.org/10.1063/1.4755789	journal	October 2012
Optimum high temperature strength of two-dimensional nanocomposites Monclús, M. A.; Zheng, S. J.; Mayeur, J. R. APL Materials, Vol. 1, Issue 5 https://doi.org/10.1063/1.4828757	journal	November 2013
Tensile behavior and flow stress anisotropy of accumulative roll bonded Cu-Nb nanolaminates Nizolek, Thomas; Beyerlein, Irene J.; Mara, Nathan A. Applied Physics Letters, Vol. 108, Issue 5 https://doi.org/10.1063/1.4941043	journal	February 2016
Emergence of stable interfaces under extreme plastic deformation Beyerlein, I. J.; Mayeur, J. R.; Zheng, S. Proceedings of the National Academy of Sciences, Vol. 111, Issue 12 https://doi.org/10.1073/pnas.1319436111	journal	March 2014
Extraordinary strain hardening by gradient structure Wu, X.; Jiang, P.; Chen, L. Proceedings of the National Academy of Sciences, Vol. 111, Issue 20 https://doi.org/10.1073/pnas.1324069111	journal	May 2014
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility Wu, Xiaolei; Yang, Muxin; Yuan, Fuping Proceedings of the National Academy of Sciences, Vol. 112, Issue 47 https://doi.org/10.1073/pnas.1517193112	journal	November 2015
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals Cordero, Z. C.; Knight, B. E.; Schuh, C. A. International Materials Reviews, Vol. 61, Issue 8 https://doi.org/10.1080/09506608.2016.1191808	journal	June 2016
Effect of Gradient Nanostructures on Tribological Properties of 316L Stainless Steel with High Energy Ion Implantation Tungsten Carbide Zhao, X. H.; Nie, D. W.; Xu, D. S. Tribology Transactions, Vol. 62, Issue 2 https://doi.org/10.1080/10402004.2018.1508797	journal	January 2019
Effect of Gradient Nanostructure on Plasma Sulfonitrocarburizing of 42MnCr52 Steel Zhao, X. H.; Zhao, Y. Q.; Xu, D. S. Tribology Transactions, Vol. 63, Issue 1 https://doi.org/10.1080/10402004.2019.1664687	journal	October 2019
Deformation structures developing on fine scales Hughes, D. A.; Hansen, N. Philosophical Magazine, Vol. 83, Issue 31-34 https://doi.org/10.1080/14786430310001605560	journal	October 2003
Transmission electron microscopy investigation of the atomic structure of interfaces in nanoscale Cu–Nb multilayers Yu-Zhang, K.; Embury, J. D.; Han, K. Philosophical Magazine, Vol. 88, Issue 17 https://doi.org/10.1080/14786430802380485	journal	June 2008
Thermal stability of Cu–Nb nanolamellar composites fabricated via accumulative roll bonding Carpenter, J. S.; Zheng, S. J.; Zhang, R. F. Philosophical Magazine, Vol. 93, Issue 7 https://doi.org/10.1080/14786435.2012.731527	journal	March 2013
The deformation of plastically non-homogeneous materials Ashby, M. F. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 21, Issue 170 https://doi.org/10.1080/14786437008238426	journal	February 1970
The Bauschinger effect and discontinuous yielding Abel, A.; Muir, H. Philosophical Magazine, Vol. 26, Issue 2 https://doi.org/10.1080/14786437208227444	journal	August 1972
X-Ray Diffraction Studies of Forward and Reverse Plastic Flow in Nanoscale Layers During Thermal Cycling Gram, Michael D.; Carpenter, John S.; Payzant, E. Andrew Materials Research Letters, Vol. 1, Issue 4 https://doi.org/10.1080/21663831.2013.843602	journal	September 2013
Synergetic Strengthening by Gradient Structure Wu, X. L.; Jiang, P.; Chen, L. Materials Research Letters, Vol. 2, Issue 4 https://doi.org/10.1080/21663831.2014.935821	journal	July 2014
Fundamentals of Superior Properties in Bulk NanoSPD Materials Valiev, R. Z.; Estrin, Y.; Horita, Z. Materials Research Letters, Vol. 4, Issue 1 https://doi.org/10.1080/21663831.2015.1060543	journal	July 2015
Back stress strengthening and strain hardening in gradient structure Yang, Muxin; Pan, Yue; Yuan, Fuping Materials Research Letters, Vol. 4, Issue 3 https://doi.org/10.1080/21663831.2016.1153004	journal	March 2016
Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials Vajpai, Sanjay Kumar; Ota, Mie; Zhang, Zhe Materials Research Letters, Vol. 4, Issue 4 https://doi.org/10.1080/21663831.2016.1218965	journal	August 2016
Heterogeneous materials: a new class of materials with unprecedented mechanical properties Wu, Xiaolei; Zhu, Yuntian Materials Research Letters, Vol. 5, Issue 8 https://doi.org/10.1080/21663831.2017.1343208	journal	June 2017
Additional hardening in harmonic structured materials by strain partitioning and back stress Park, Hyung Keun; Ameyama, Kei; Yoo, Jongmyung Materials Research Letters, Vol. 6, Issue 5 https://doi.org/10.1080/21663831.2018.1439115	journal	February 2018
Ductility by shear band delocalization in the nano-layer of gradient structure Yuan, Fuping; Yan, Dingshun; Sun, Jiangda Materials Research Letters, Vol. 7, Issue 1 https://doi.org/10.1080/21663831.2018.1546238	journal	November 2018
Effects of residual stress on the mechanical properties of copper processed using ultrasonic-nanocrystalline surface modification Moon, Ji Hyun; Baek, Seung Mi; Lee, Seok Gyu Materials Research Letters, Vol. 7, Issue 3 https://doi.org/10.1080/21663831.2018.1560370	journal	December 2018
In-situ observation of dislocation dynamics near heterostructured interfaces Zhou, Hao; Huang, Chongxiang; Sha, Xuechao Materials Research Letters, Vol. 7, Issue 9 https://doi.org/10.1080/21663831.2019.1616330	journal	May 2019
Perspective on hetero-deformation induced (HDI) hardening and back stress Zhu, Yuntian; Wu, Xiaolei Materials Research Letters, Vol. 7, Issue 10 https://doi.org/10.1080/21663831.2019.1616331	journal	May 2019
Residual stress provides significant strengthening and ductility in gradient structured materials Yang, Mu-Xin; Li, Run-Guang; Jiang, Ping Materials Research Letters, Vol. 7, Issue 11 https://doi.org/10.1080/21663831.2019.1635537	journal	July 2019
Heterostructures: new opportunities for functional materials Zhang, Xiangyi Materials Research Letters, Vol. 8, Issue 2 https://doi.org/10.1080/21663831.2019.1691668	journal	November 2019
The first bulk nanostructured metal Bhadeshia, H. K. D. H. Science and Technology of Advanced Materials, Vol. 14, Issue 1 https://doi.org/10.1088/1468-6996/14/1/014202	journal	February 2013
Nanostructured bainite Bhadeshia, H. K. D. H. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 466, Issue 2113 https://doi.org/10.1098/rspa.2009.0407	journal	October 2009
Deformation heterogeneity and texture in surface severe plastic deformation of copper Basu, Saurabh; Wang, Zhiyu; Saldana, Christopher Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 472, Issue 2187 https://doi.org/10.1098/rspa.2015.0486	journal	March 2016
Atomistic modeling of defect-induced plasticity in CuNb nanocomposites Martínez, Enrique; Caro, Alfredo; Beyerlein, Irene J. Physical Review B, Vol. 90, Issue 5 https://doi.org/10.1103/PhysRevB.90.054103	journal	August 2014
Interaction of small mobile stacking fault tetrahedra with free surfaces, dislocations, and interfaces in Cu and Cu-Nb Martínez, Enrique; Uberuaga, Blas P.; Beyerlein, Irene J. Physical Review B, Vol. 93, Issue 5 https://doi.org/10.1103/PhysRevB.93.054105	journal	February 2016
Deformation Crossover: From Nano- to Mesoscale Cheng, S.; Stoica, A. D.; Wang, X. -L. Physical Review Letters, Vol. 103, Issue 3 https://doi.org/10.1103/PhysRevLett.103.035502	journal	July 2009
Exploring the Limit of Dislocation Based Plasticity in Nanostructured Metals Hughes, D. A.; Hansen, N. Physical Review Letters, Vol. 112, Issue 13 https://doi.org/10.1103/PhysRevLett.112.135504	journal	April 2014
Graded Nanostructures Produced by Sliding and Exhibiting Universal Behavior Hughes, D. A.; Hansen, N. Physical Review Letters, Vol. 87, Issue 13 https://doi.org/10.1103/PhysRevLett.87.135503	journal	September 2001
Nitriding Iron at Lower Temperatures Tong, W. P. Science, Vol. 299, Issue 5607 https://doi.org/10.1126/science.1080216	journal	January 2003
Ultrahigh Strength and High Electrical Conductivity in Copper Lu, L. Science, Vol. 304, Issue 5669 https://doi.org/10.1126/science.1092905	journal	April 2004
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper Fang, T. H.; Li, W. L.; Tao, N. R. Science, Vol. 331, Issue 6024 https://doi.org/10.1126/science.1200177	journal	February 2011
Design of Stable Nanocrystalline Alloys Chookajorn, T.; Murdoch, H. A.; Schuh, C. A. Science, Vol. 337, Issue 6097 https://doi.org/10.1126/science.1224737	journal	August 2012
Making strong nanomaterials ductile with gradients Lu, K. Science, Vol. 345, Issue 6203 https://doi.org/10.1126/science.1255940	journal	September 2014
Ordered macro-microporous metal-organic framework single crystals Shen, Kui; Zhang, Lei; Chen, Xiaodong Science, Vol. 359, Issue 6372 https://doi.org/10.1126/science.aao3403	journal	January 2018
Extra strengthening and work hardening in gradient nanotwinned metals Cheng, Zhao; Zhou, Haofei; Lu, Qiuhong Science, Vol. 362, Issue 6414 https://doi.org/10.1126/science.aau1925	journal	November 2018
Ultrahigh–energy density lead-free dielectric films via polymorphic nanodomain design Pan, Hao; Li, Fei; Liu, Yao Science, Vol. 365, Issue 6453 https://doi.org/10.1126/science.aaw8109	journal	August 2019
An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design Tasan, C. C.; Diehl, M.; Yan, D. Annual Review of Materials Research, Vol. 45, Issue 1 https://doi.org/10.1146/annurev-matsci-070214-021103	journal	July 2015
Steel-Based Composites: Driving Forces and Classifications Embury, David; Bouaziz, Olivier Annual Review of Materials Research, Vol. 40, Issue 1 https://doi.org/10.1146/annurev-matsci-070909-104438	journal	June 2010
Electrodeposited Multilayer Thin Films Ross, C. A. Annual Review of Materials Science, Vol. 24, Issue 1 https://doi.org/10.1146/annurev.ms.24.080194.001111	journal	August 1994
Plastic and Elastic Properties of Compositionally Modulated Thin Films Barnett, S. A.; Shinn, M. Annual Review of Materials Science, Vol. 24, Issue 1 https://doi.org/10.1146/annurev.ms.24.080194.002405	journal	August 1994
Microstructural Evolution of a Nanostructure of Shot Peened 304 Stainless Steel Upon Heat Treatment He, Yinsheng; Lee, Han-Sang; Yang, Cheol-Woong Science of Advanced Materials, Vol. 9, Issue 11 https://doi.org/10.1166/sam.2017.2828	journal	November 2017
Evolution of dislocation structure induced by cyclic deformation in a directionally solidified cobalt base superalloy Lu, Z.; Xu, Y. B.; Hu, Z. Q. Materials Science and Technology, Vol. 15, Issue 2 https://doi.org/10.1179/026708399101505707	journal	February 1999
Effects of Elevated Temperature Annealing on the Structure and Hardness of Copper/niobium Nanolayered Films Misra, A.; Hoagland, R. G. Journal of Materials Research, Vol. 20, Issue 8 https://doi.org/10.1557/JMR.2005.0250	journal	August 2005
Dislocation-Based Deformation Mechanisms in Metallic Nanolaminates Anderson, P. M.; Foecke, T.; Hazzledine, P. M. MRS Bulletin, Vol. 24, Issue 2 https://doi.org/10.1557/S0883769400051514	journal	February 1999
Characterizing interface dislocations by atomically informed Frank-Bilby theory Wang, Jian; Zhang, Ruifeng; Zhou, Caizhi Journal of Materials Research, Vol. 28, Issue 13 https://doi.org/10.1557/jmr.2013.34	journal	April 2013
Room temperature deformation mechanisms of Mg/Nb nanolayered composites Ardeljan, Milan; Knezevic, Marko; Jain, Manish Journal of Materials Research, Vol. 33, Issue 10 https://doi.org/10.1557/jmr.2018.107	journal	May 2018
Obtaining ultimate functionalities in nanocomposites: Design, control, and fabrication Nan, Ce-Wen; Jia, Quanxi MRS Bulletin, Vol. 40, Issue 9 https://doi.org/10.1557/mrs.2015.196	journal	September 2015
Interface-driven mechanisms in cubic/noncubic nanolaminates at different scales Beyerlein, I. J.; Wang, J. MRS Bulletin, Vol. 44, Issue 1 https://doi.org/10.1557/mrs.2018.319	journal	January 2019
Formation of Nanocrystalline Structure in Steels by Air Blast Shot Peening Umemoto, Minoru; Todaka, Yoshikazu; Tsuchiya, Koichi MATERIALS TRANSACTIONS, Vol. 44, Issue 7 https://doi.org/10.2320/matertrans.44.1488	journal	January 2003
Formation of Nanocrystalline Structure at the Surface of Drill Hole in Steel Todaka, Yoshikazu; Umemoto, Minoru; Tanaka, Shuji MATERIALS TRANSACTIONS, Vol. 45, Issue 7 https://doi.org/10.2320/matertrans.45.2209	journal	January 2004
Comparison of Nanocrystalline Surface Layer in Steels Formed by Air Blast and Ultrasonic Shot Peening Todaka, Yoshikazu; Umemoto, Minoru; Tsuchiya, Koichi MATERIALS TRANSACTIONS, Vol. 45, Issue 2 https://doi.org/10.2320/matertrans.45.376	journal	January 2004
Application of Harmonic Structure Design to Biomedical Co–Cr–Mo Alloy for Improved Mechanical Properties Sawangrat, Choncharoen; Yamaguchi, Osamu; Vajpai, Sanjay Kumar MATERIALS TRANSACTIONS, Vol. 55, Issue 1 https://doi.org/10.2320/matertrans.MA201303	journal	January 2014
New Microstructure Design for Commercially Pure Titanium with Outstanding Mechanical Properties by Mechanical Milling and Hot Roll Sintering Sekiguchi, Tatsuya; Ono, Keita; Fujiwara, Hiroshi MATERIALS TRANSACTIONS, Vol. 51, Issue 1 https://doi.org/10.2320/matertrans.MB200913	journal	January 2010
Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys Tsuji, Nobuhiro; Gholizadeh, Reza; Ueji, Rintaro MATERIALS TRANSACTIONS, Vol. 60, Issue 8 https://doi.org/10.2320/matertrans.MF201936	journal	January 2019
Effects of Microstructure on Mechanical Properties of Harmonic Structure Designed Pure Ni Nagata, Masaya; Horikawa, Naoki; Kawabata, Mie MATERIALS TRANSACTIONS, Vol. 60, Issue 9 https://doi.org/10.2320/matertrans.MT-M2019145	journal	January 2019
Formation of Surface Nanocrystalline Structure in Steels by Shot Peening and Role of Strain Gradient on Grain Refinement by Deformation Todaka, Yoshikazu; Umemoto, Minoru; Watanabe, Yukinori ISIJ International, Vol. 47, Issue 1 https://doi.org/10.2355/isijinternational.47.157	journal	January 2007
Texture Evolution in Nanocrystalline Fe Induced by Surface Mechanical Attrition Treatment Chen, Wei Ye; Tong, Wei Ping; He, Chang Shu Materials Science Forum, Vol. 706-709 https://doi.org/10.4028/www.scientific.net/MSF.706-709.2663	journal	January 2012

Similar Records

Related Subjects

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY
back stress
forward stress
hetero-deformation induced (HDI) hardening
heterostructured materials
heterostructures
synergy

Heterostructured materials: superior properties from hetero-zone interaction

Citation Formats

References (222)

Similar Records

Related Subjects