Investigation of laser direct energy deposition for production of ODS alloys

Technical Report · Thu Sep 13 04:00:00 EDT 2018

DOI:https://doi.org/10.2172/1658016· OSTI ID:1658016

Sridharan, Niyanth ^[1]; Dryepondt, Sebastien N. ^[1]; Field, Kevin G. ^[1]

---

1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Laser blown powder additive manufacturing (AM) was performed to evaluate the feasibility of using the technique to fabricate oxide dispersion strengthened (ODS) alloys. The idea was to utilize an in-situ oxidation reaction to oxidize reactive elements to generate a refined dispersion of the dispersoids with a uniform size distribution. Builds were fabricated using Y added 316L in a reactive atmosphere and an inert atmosphere for comparisons. Detailed characterization was performed to understand the as-fabricated microstructure. Detailed characterization and chemical analysis show that there is significant Y loss during deposition. The loss in Y during processing leads to a reduced volume fraction of precipitates (~2 x 10¹⁸/m³) with an average size of ~97 nm. Mechanical testing of the samples fabricated in both air and in inert atmosphere were performed at RT, 200 °C, 400 °C and 600 °C. The mechanical properties were then compared with austenitic ODS alloys that were reported in the literature. The results show that while the ultimate tensile strengths were comparable with wrought ODS alloys, the deterioration in yield strength with temperature was more severe in the case of the AM fabricated ODS material. However, the ductility was observed to be higher than all wrought 316L ODS alloys. Future efforts will focus on increasing the percentage of Y in the pre-alloyed powder to refine the dispersoids. In addition, a close control of process parameters and post processing treatments need to be explored to optimize the dispersoids volume fraction.

• Research Organization: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
• Sponsoring Organization: USDOE Office of Nuclear Energy (NE)
• DOE Contract Number: AC05-00OR22725
• OSTI ID: 1658016
• Report Number(s): ORNL/SPR-2018/983
• Country of Publication: United States
• Language: English

Related Subjects

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
36 MATERIALS SCIENCE
42 ENGINEERING