Optimization of DARHT Axis 1 Injector Voltage
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Nevada National Security Site (NNSS), North Las Vegas, NV (United States)
The Dual-Axis Radiographic Hydrodynamic Test (DARHT) facility provides flash radiography capabilities using two electron Linear Induction Accelerators (LIA’s). Axis-1 of DARHT produces a 20- MeV, 2-kA, 80-ns-FWHM electron beam. The strict requirements for flash radiography require a detailed understanding of the LIA’s performance, including precision measurements of the injector electron beam energy. The technique for time resolved measurement of the electron beam energy using electron Permanent Magnet Spectrometer (ePMSpec) has been developed. The electron energy then is used to infer the voltage produced by the injector pulsed power. The injector pulsed power of DARHT I consists of a 1.5-MV, glycol-insulated Blumlein that is pulsecharged by a step-up transformer and switched by four, laser-triggered spark gaps. A series of increasing impedance transmission lines are used to transform the output voltage of the Blumlein to a maximum of 3.8MV at the diode. Figure 1a shows a graphic of the Axis-1 prime power tank, Blumlein and downstream transmission lines. The injector pulse power is designed to produce voltage on a velvet cathode located in the vacuum vessel. The specifications of the voltage-pulse flat-top over 60ns is +/-1%. A key element in the high-voltage circuit is the ethylene glycol Blumlein. The outer volume, adjacent to the laser triggered switches of the Blumlein, is a peaking capacitor. This is an independent volume that contains a mixture of ethylene glycol and water to make it an adjustable capacitor of 380 to 750 pF.
- Research Organization:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE National Nuclear Security Administration (NNSA), Office of Defense Nuclear Nonproliferation
- DOE Contract Number:
- 89233218CNA000001
- OSTI ID:
- 1648059
- Report Number(s):
- LA-UR--20-23236
- Country of Publication:
- United States
- Language:
- English
Similar Records
DARHT Axis 1 Time-Resolved Injector Energy Measurement
Circuit modeling and component trimming to achieve performance requirements for the DARHT prototype injector
Linear Induction Accelerator Cell Voltage Calibration Using Compact Electron Permanent Magnet Spectrometer
Technical Report
·
Mon Aug 03 00:00:00 EDT 2020
·
OSTI ID:1645060
Circuit modeling and component trimming to achieve performance requirements for the DARHT prototype injector
Conference
·
Sun Aug 01 00:00:00 EDT 1993
·
OSTI ID:10176983
Linear Induction Accelerator Cell Voltage Calibration Using Compact Electron Permanent Magnet Spectrometer
Technical Report
·
Tue Oct 08 00:00:00 EDT 2019
·
OSTI ID:1569726