Electrostatic comb drive for vertical actuation
The electrostatic comb finger drive has become an integral design for microsensor and microactuator applications. This paper reports on utilizing the levitation effect of comb fingers to design vertical-to-the-substrate actuation for interferometric applications. For typical polysilicon comb drives with 2 {micro}m gaps between the stationary and moving fingers, as well as between the microstructures and the substrate, the equilibrium position is nominally 1-2 {micro}m above the stationary comb fingers. This distance is ideal for many phase shifting interferometric applications. Theoretical calculations of the vertical actuation characteristics are compared with the experimental results, and a general design guideline is derived from these results. The suspension flexure stiffnesses, gravity forces, squeeze film damping, and comb finger thicknesses are parameters investigated which affect the displacement curve of the vertical microactuator. By designing a parallel plate capacitor between the suspended mass and the substrate, in situ position sensing can be used to control the vertical movement, providing a total feedback-controlled system. Fundamentals of various capacitive position sensing techniques are discussed. Experimental verification is carried out by a Zygo distance measurement interferometer.
- Sponsoring Organization:
- (US)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 16389
- Report Number(s):
- UCRL-JC-127771; CONF-970968*--; ON: DE98051008
- Country of Publication:
- United States
- Language:
- English
Similar Records
Microfabricated actuators and their application to optics
Micromachined electrostatic vertical actuator