Magnesium alloy ZK60 tubing made by Shear Assisted Processing and Extrusion (ShAPE)

Whalen, S.; Overman, N.; Joshi, V.; Varga, T.; Graff, D.; Lavender, C.

doi:10.1016/j.msea.2019.04.013

Magnesium alloy ZK60 tubing made by Shear Assisted Processing and Extrusion (ShAPE)

Journal Article · Wed May 01 00:00:00 EDT 2019 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2019.04.013· OSTI ID:1636669

Whalen, S.; Overman, N.; Joshi, V.; Varga, T.; Graff, D.; Lavender, C.

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 1636669

Alternate ID(s):: OSTI ID: 1808551

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Journal Name: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing Journal Issue: C Vol. 755; ISSN 0921-5093

Publisher:: ElsevierCopyright Statement

Country of Publication:: Netherlands

Language:: English

References (38)

Trends in wetting behavior for Ag–CuO braze alloys on Ba0.5Sr0.5Co0.8Fe0.2O(3−δ) at elevated temperatures in air Joshi, Vineet V.; Meier, Alan; Darsell, Jens Journal of Materials Science, Vol. 48, Issue 20 https://doi.org/10.1007/s10853-013-7531-2	journal	June 2013
Production of Wire From AA7277 Aluminum Chips via Friction-Stir Extrusion (FSE) Behnagh, Reza Abdi; Mahdavinejad, Ramezanali; Yavari, Amin Metallurgical and Materials Transactions B, Vol. 45, Issue 4 https://doi.org/10.1007/s11663-014-0067-2	journal	April 2014
Friction Consolidation Processing of n-Type Bismuth-Telluride Thermoelectric Material Whalen, Scott; Jana, Saumyadeep; Catalini, David Journal of Electronic Materials, Vol. 45, Issue 7 https://doi.org/10.1007/s11664-016-4454-0	journal	April 2016
Drop Weight Impact Behavior of Al-Si-Cu Alloy Foam-Filled Thin-Walled Steel Pipe Fabricated by Friction Stir Back Extrusion Hangai, Yoshihiko; Nakano, Yukiko; Utsunomiya, Takao Journal of Materials Engineering and Performance, Vol. 26, Issue 2 https://doi.org/10.1007/s11665-016-2484-7	journal	December 2016
AZ31 magnesium alloy recycling through friction stir extrusion process Buffa, Gianluca; Campanella, Davide; Fratini, Livan International Journal of Material Forming, Vol. 9, Issue 5 https://doi.org/10.1007/s12289-015-1247-6	journal	July 2015
Optimization of Friction Stir Extrusion (FSE) Parameters Through Taguchi Technique Ansari, Mohammad Ali; Behnagh, Reza Abdi; Narvan, Morteza Transactions of the Indian Institute of Metals, Vol. 69, Issue 7 https://doi.org/10.1007/s12666-015-0686-6	journal	November 2015
Microstructure and Mechanical Characterization of Aluminum Seamless Tubes Produced by Friction Stir Back Extrusion Mathew, N.; Dinaharan, I.; Vijay, S. J. Transactions of the Indian Institute of Metals, Vol. 69, Issue 10 https://doi.org/10.1007/s12666-016-0841-8	journal	February 2016
Microstructure and Mechanical Properties of Al Tube Processed by Friction Stir Tube Back Extrusion (FSTBE) Ahmadkhanbeigi, M.; Shapourgan, O.; Faraji, G. Transactions of the Indian Institute of Metals, Vol. 70, Issue 7 https://doi.org/10.1007/s12666-016-0987-4	journal	November 2016
Magnesium Mordike, B. L.; Ebert, T. Materials Science and Engineering: A, Vol. 302, Issue 1 https://doi.org/10.1016/S0921-5093(00)01351-4	journal	April 2001
The role of the magnesium industry in protecting the environment Aghion, E.; Bronfin, B.; Eliezer, D. Journal of Materials Processing Technology, Vol. 117, Issue 3 https://doi.org/10.1016/S0924-0136(01)00779-8	journal	November 2001
Effects of heat treatment on microstructure and mechanical properties of ZK60 Mg alloy Chen, Xian-hua; Huang, Xiao-wang; Pan, Fu-sheng Transactions of Nonferrous Metals Society of China, Vol. 21, Issue 4 https://doi.org/10.1016/S1003-6326(11)60776-0	journal	April 2011
Evaluation of wear and corrosion resistance of pure Mg wire produced by friction stir extrusion Sharifzadeh, Mohammad; Ansari, Mohammad ali; Narvan, Morteza Transactions of Nonferrous Metals Society of China, Vol. 25, Issue 6 https://doi.org/10.1016/S1003-6326(15)63791-8	journal	June 2015
Analysis of the cracks formation on surface of extruded magnesium rod based on numerical modeling and experimental verification Hu, Hongjun; Zhang, Dingfei; Pan, Fusheng Acta Metallurgica Sinica (English Letters), Vol. 22, Issue 5 https://doi.org/10.1016/S1006-7191(08)60109-X	journal	October 2009
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations Agnew, S. R.; Mehrotra, P.; Lillo, T. M. Acta Materialia, Vol. 53, Issue 11 https://doi.org/10.1016/j.actamat.2005.02.019	journal	June 2005
Aluminum alloy foam-filled aluminum tube fabricated by friction stir back extrusion and its compression properties Hangai, Yoshihiko; Otazawa, Shunsuke; Utsunomiya, Takao Composite Structures, Vol. 183 https://doi.org/10.1016/j.compstruct.2017.04.048	journal	January 2018
Dynamic recrystallization: plasticity enhancing structural development McQueen, H. J.; Imbert, C. A. C. Journal of Alloys and Compounds, Vol. 378, Issue 1-2 https://doi.org/10.1016/j.jallcom.2003.10.067	journal	September 2004
Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression Lin, Jinbao; Wang, Qudong; Peng, Liming Journal of Alloys and Compounds, Vol. 476, Issue 1-2 https://doi.org/10.1016/j.jallcom.2008.09.031	journal	May 2009
Recent developments in rare-earth free wrought magnesium alloys having high strength: A review Pan, Hucheng; Ren, Yuping; Fu, He Journal of Alloys and Compounds, Vol. 663 https://doi.org/10.1016/j.jallcom.2015.12.057	journal	April 2016
Recent research and developments on wrought magnesium alloys You, Sihang; Huang, Yuanding; Kainer, Karl Ulrich Journal of Magnesium and Alloys, Vol. 5, Issue 3 https://doi.org/10.1016/j.jma.2017.09.001	journal	September 2017
Influence of processing parameters and initial temper on Friction Stir Extrusion of 2050 aluminum alloy Baffari, Dario; Reynolds, Anthony P.; Li, Xiao Journal of Manufacturing Processes, Vol. 28 https://doi.org/10.1016/j.jmapro.2017.06.013	journal	August 2017
Process mechanics in Friction Stir Extrusion of magnesium alloys chips through experiments and numerical simulation Baffari, Dario; Buffa, Gianluca; Campanella, Davide Journal of Manufacturing Processes, Vol. 29 https://doi.org/10.1016/j.jmapro.2017.07.010	journal	October 2017
Evaluation of microstructure and mechanical properties of aluminum AA7022 produced by friction stir extrusion Tahmasbi, Kamin; Mahmoodi, Masoud Journal of Manufacturing Processes, Vol. 32 https://doi.org/10.1016/j.jmapro.2018.02.008	journal	April 2018
Production of wire via friction extrusion of aluminum alloy machining chips Tang, W.; Reynolds, A. P. Journal of Materials Processing Technology, Vol. 210, Issue 15 https://doi.org/10.1016/j.jmatprotec.2010.08.010	journal	November 2010
Strain and texture in friction extrusion of aluminum wire Li, X.; Tang, W.; Reynolds, A. P. Journal of Materials Processing Technology, Vol. 229 https://doi.org/10.1016/j.jmatprotec.2015.09.012	journal	March 2016
Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications Mostaed, Ehsan; Hashempour, Mazdak; Fabrizi, Alberto Journal of the Mechanical Behavior of Biomedical Materials, Vol. 37 https://doi.org/10.1016/j.jmbbm.2014.05.024	journal	September 2014
Effect of heat treatment on strain hardening of ZK60 Mg alloy Chen, Xianhua; Pan, Fusheng; Mao, Jianjun Materials & Design, Vol. 32, Issue 3 https://doi.org/10.1016/j.matdes.2010.10.008	journal	March 2011
Microstructure evolutions and mechanical properties of tubular aluminum produced by friction stir back extrusion Sarkari Khorrami, Mahmoud; Movahedi, Mojtaba Materials & Design (1980-2015), Vol. 65 https://doi.org/10.1016/j.matdes.2014.09.018	journal	January 2015
Development of dynamic recrystallization theory McQueen, H. J. Materials Science and Engineering: A, Vol. 387-389 https://doi.org/10.1016/j.msea.2004.01.064	journal	December 2004
ZK60 alloy processed by ECAP: Microstructural, physical and mechanical characterization Dumitru, F. -D.; Higuera-Cobos, O. F.; Cabrera, J. M. Materials Science and Engineering: A, Vol. 594 https://doi.org/10.1016/j.msea.2013.11.050	journal	January 2014
Superior mechanical properties of ZK60 mg alloy processed by equal channel angular pressing and rolling Yuan, Yuchun; Ma, Aibin; Gou, Xiaofan Materials Science and Engineering: A, Vol. 630 https://doi.org/10.1016/j.msea.2015.02.004	journal	April 2015
Homogenization and texture development in rapidly solidified AZ91E consolidated by Shear Assisted Processing and Extrusion (ShAPE) Overman, N. R.; Whalen, S. A.; Bowden, M. E. Materials Science and Engineering: A, Vol. 701 https://doi.org/10.1016/j.msea.2017.06.062	journal	July 2017
Deformation and fracture mechanisms in WE43 magnesium-rare earth alloy fabricated by direct-chill casting and rolling Jahedi, Mohammad; McWilliams, Brandon A.; Knezevic, Marko Materials Science and Engineering: A, Vol. 726 https://doi.org/10.1016/j.msea.2018.04.090	journal	May 2018
Microstructural Characterization of Pure Copper Tubes Produced by a Novel Method Friction Stir Back Extrusion Dinaharan, I.; Sathiskumar, R.; Vijay, S. J. Procedia Materials Science, Vol. 5 https://doi.org/10.1016/j.mspro.2014.07.337	journal	January 2014
Al-SiC Metal Matrix Composite production through Friction Stir Extrusion of aluminum chips Baffari, Dario; Buffa, Gianluca; Campanella, Davide Procedia Engineering, Vol. 207 https://doi.org/10.1016/j.proeng.2017.10.798	journal	January 2017
A preliminary study on the feasibility of friction stir back extrusion Abu-Farha, Fadi Scripta Materialia, Vol. 66, Issue 9, p. 615-618 https://doi.org/10.1016/j.scriptamat.2012.01.059	journal	May 2012
Towards magnesium alloys for high-volume automotive applications Joost, William J.; Krajewski, Paul E. Scripta Materialia, Vol. 128 https://doi.org/10.1016/j.scriptamat.2016.07.035	journal	February 2017
Microstructural and mechanical characterization of magnesium based alloy MA14 (ZK60 A): evolution under deformation and heat treatment Volkova, E. F. HPSM/OPTI 2014, WIT Transactions on The Built Environment https://doi.org/10.2495/HPSM140021	conference	June 2014
Microstructure and Properties of Pure Mg/ZK60 Laminate Processed by Accumulative Roll Bonding Xu, C.; Zheng, Ming Yi; Chang, Hai Materials Science Forum, Vol. 650 https://doi.org/10.4028/www.scientific.net/MSF.650.343	journal	May 2010

Similar Records

Magnesium Alloy ZK60 Tubing made by Shear Assisted Processing and Extrusion (ShAPE)

Journal Article · Tue May 07 00:00:00 EDT 2019 · Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Processing · OSTI ID:1808551

Hot Rolling of ZK60 Magnesium Alloy with Isotropic Tensile Properties from Tubing Made by Shear Assisted Processing and Extrusion (ShAPE)

Journal Article · Mon Apr 24 20:00:00 EDT 2023 · Applied Sciences · OSTI ID:1983581

Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)

Technical Report · Thu Dec 30 23:00:00 EST 2021 · OSTI ID:1987402

Magnesium alloy ZK60 tubing made by Shear Assisted Processing and Extrusion (ShAPE)

Citation Formats

References (38)

Similar Records

Related Subjects