skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Numerical investigation of micro-galvanic corrosion in Mg alloys: Role of the cathodic intermetallic phase size and spatial distributions

Conference ·

Magnesium alloys are of increasing interest in structural applications due to their low-density, moderate specific strength and stiffness, recyclability, and high damping among other properties. However, the wide-scale applicability of magnesium alloys in structural applications has been limited due to many factors including its poor corrosion resistance. In this work, a numerical investigation to simulate the micro-galvanic corrosion behavior was performed to examine the influence of size and distribution of cathodic intermetallic phase (ß-Mg17Al12) in a Mg matrix. The ratio of cathodic to anodic surface area was kept constant in each simulation condition to understand the effect of size and spacing distributions. In general, fragmentation of a larger intermetallic particle into smaller ones was found to enhance the localized current density. However, the uniform distribution of this small intermetallic phase throughout the matrix was found to reduce the overall dissolution current density and hence, pitting corrosion severity.

Research Organization:
Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC05-76RL01830
OSTI ID:
1607692
Report Number(s):
PNNL-SA-147890
Resource Relation:
Conference: Magnesium Technology 2020
Country of Publication:
United States
Language:
English

References (32)

Fundamentals and advances in magnesium alloy corrosion journal August 2017
A survey of bio-corrosion rates of magnesium alloys journal February 2010
Effect of solutes on ideal shear resistance and electronic properties of magnesium: A first-principles study journal July 2018
On the roles of stress-triaxiality and strain-rate on the deformation behavior of AZ31 magnesium alloys journal December 2017
The Role of Mg 17 Al 12 Phase in the Corrosion of Mg Alloy AZ91 journal September 1989
Effect of cast Microstructures on Corrosion Behaviour of Az91d Magnesium Alloy conference November 2011
Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy journal February 2010
Effect of Grain Size on Corrosion: A Review journal July 2010
Crystallographic orientation and electrochemical activity of AZ31 Mg alloy journal August 2010
Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy journal April 2012
The Effect of Pre-Processing and Grain Structure on the Bio-Corrosion and Fatigue Resistance of Magnesium Alloy AZ31 journal November 2007
Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior journal May 2011
Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media journal November 2008
Effect of Y, Sr, and Nd additions on the microstructure and microfracture mechanism of squeeze-cast AZ91-X magnesium alloys journal April 1998
Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg–Zn–Y–Zr alloys journal April 2007
Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys journal February 2017
Effect of heat treatment on strain hardening of ZK60 Mg alloy journal March 2011
The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy journal January 2009
Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution journal February 2010
Corrosion and mechanical properties of hot-extruded AZ31 magnesium alloys journal December 2008
Effect of mechanical loading on the galvanic corrosion behavior of a magnesium-steel structural joint journal April 2018
Validated numerical modelling of galvanic corrosion for couples: Magnesium alloy (AE44)–mild steel and AE44–aluminium alloy (AA6063) in brine solution journal October 2010
Role of Static and Cyclic Deformation on the Corrosion Behavior of a Magnesium-Steel Structural Joint journal June 2017
Numerical Simulation of Micro-Galvanic Corrosion in Al Alloys: Effect of Geometric Factors journal December 2016
Predictive modeling of localized corrosion: An application to aluminum alloys journal June 2011
Numerical modeling of micro-galvanic corrosion journal January 2011
Numerical modelling of the galvanic coupling in aluminium alloys: A discussion on the application of local probe techniques journal January 2010
Numerical simulation of the effect of grain size on corrosion processes: Surface roughness oscillation and cluster detachment journal August 2011
Shear Assisted Processing and Extrusion (ShAPE™) of AZ91E Flake: A Study of Tooling Features and Processing Effects journal July 2018
Homogenization and texture development in rapidly solidified AZ91E consolidated by Shear Assisted Processing and Extrusion (ShAPE) journal July 2017
Magnesium alloy ZK60 tubing made by Shear Assisted Processing and Extrusion (ShAPE) journal May 2019
The influences of multiscale second-phase particles on strength and ductility of cast Mg alloys journal October 2018

Similar Records

Stress Corrosion Cracking of Al-Mg and Mg-Al Alloys
Journal Article · Wed Dec 01 00:00:00 EST 2004 · Corrosion, 60(12):1144-1154 · OSTI ID:1607692

The galvanic coupling of UNS NO4400 heat exchanger tubes to carbon steel anodes
Book · Sun Oct 01 00:00:00 EDT 1995 · OSTI ID:1607692

Effects of the Addition of Micro-amounts of Calcium on the Corrosion Resistance of Mg-0.1Mn-1.0Zn-xCa Biomaterials
Journal Article · Fri Mar 15 00:00:00 EDT 2019 · Journal of Materials Engineering and Performance · OSTI ID:1607692

Related Subjects