skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Considerations for in situ, real time measurement of plasma-material interactions using Digital Holographic imaging

Conference ·

Digital Holographic (DH) imaging is a laser-based measurement technique, which can be used to monitor a material surface as it is being exposed to fusion-relevant plasmas. Both single-laser and dual-laser DH measurements have been demonstrated ex situ at Oak Ridge National Laboratory (ORNL). A DH diagnostic system is being assessed for deployment at ORNL to make in situ, real-time measurements of plasma erosion/redeposition in the Prototype Material Plasma Exposure eXperiment (Proto-MPEX). In situ, real time measurements pose unique challenges to diagnostic systems, which are not encountered by ex situ analysis techniques. The absolute surface height (tracked at the nm to μm position) during plasma exposure can be modified by: 1) surface movement due to vibration or thrust exerted by the plasma device, 2) surface growth due to the thermal expansion of the material under steady MW/m2 or transient GW/m2 plasma heat loads, and 3) surface modification due to plasma erosion/redeposition of the material substrate. To assess these effects, 1) the vibration spectrum of the diagnostic and the pulsed plasma device have been measured, 2) the thermal growth of the surface has been measured for an applied heat flux, and 3) the surface modification has been measured ex situ post plasma exposure, and ex situ post laser ablation as a proxy for the plasma. This paper will provide an overview of the results that have been achieved in the development of a DH diagnostic for in situ real-time measurements of plasma exposed surfaces in the Proto-MPEX device.

Research Organization:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
DOE Contract Number:
AC05-00OR22725
OSTI ID:
1606645
Resource Relation:
Journal Volume: 15; Journal Issue: 02; Conference: 19th International Symposium on Laser Aided Plasma Diagnostics (LAPD 2019) - Whitefish, Montana, United States of America - 9/22/2019 12:00:00 PM-9/26/2019 4:00:00 AM
Country of Publication:
United States
Language:
English

References (13)

Key ITER plasma edge and plasma–material interaction issues journal March 2003
Digital holography for in situ real-time measurement of plasma-facing-component erosion journal November 2014
Design of a digital holography system for PFC erosion measurements on Proto-MPEX journal October 2016
Dual laser holography for in situ measurement of plasma facing component erosion (invited) journal October 2018
Recent Developments in Dual-Laser Digital Holography for Plasma-Facing Surface Characterization journal June 2020
Developing the science and technology for the Material Plasma Exposure eXperiment journal July 2017
Characterization of an electrothermal plasma source for fusion transient simulations journal January 2018
Nonlinear Impact of Edge Localized Modes on Carbon Erosion in the Divertor of the JET Tokamak journal January 2009
Utilization of O-X-B mode conversion of 28 GHz microwaves to heat core electrons in the upgraded Proto-MPEX journal May 2019
Principal VASIMR Results and Present Objectives
  • Glover, Tim W.
  • SPACE TECHNOLOGY AND APPLICATIONS INT.FORUM-STAIF 2005: Conf.Thermophys in Micrograv;Conf Comm/Civil Next Gen.Space Transp; 22nd Symp Space Nucl.Powr Propuls.;Conf.Human/Robotic Techn.Nat'l Vision Space Expl.; 3rd Symp Space Colon.; 2nd Symp.New Frontiers, AIP Conference Proceedings https://doi.org/10.1063/1.1867222
conference January 2005
Plasma source development for fusion-relevant material testing
  • Caughman, John B. O.; Goulding, Richard H.; Biewer, Theodore M.
  • Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 35, Issue 3 https://doi.org/10.1116/1.4982664
journal May 2017
Characterization of the helicon plasma flux to the target of Proto-MPEX journal January 2019
Surface Erosion of Plasma-Facing Materials Using an Electrothermal Plasma Source and Ion Beam Micro-Trenches journal June 2019

Similar Records

Dual laser holography for in situ measurement of plasma facing component erosion (invited)
Journal Article · Tue Oct 09 00:00:00 EDT 2018 · Review of Scientific Instruments · OSTI ID:1606645

Development of the materials analysis and particle probe for Proto-MPEX
Journal Article · Fri Apr 16 00:00:00 EDT 2021 · Review of Scientific Instruments · OSTI ID:1606645

Development of the materials analysis and particle probe for Proto-MPEX
Conference · Thu Apr 01 00:00:00 EDT 2021 · OSTI ID:1606645

Related Subjects