Dechirper wakefields for short bunches
- SLAC National Accelerator Lab., Menlo Park, CA (United States)
In previous work (Bane and Stupakov, 2015) general expressions, valid for arbitrary bunch lengths, were derived for the wakefields of corrugated structures with flat geometry, such as is used in the RadiaBeam/LCLS dechirper. However, the bunch at the end of linac-based X-ray FELs—like the LCLS—is extremely short, and for short bunches the wakes can be considerably simplified. In this work, we first derive analytical approximations to the short-range wakes. These are generalized wakes, in the sense that their validity is not limited to a small neighborhood of the symmetry axis, but rather extends to arbitrary transverse offsets of driving and test particles. The validity of these short-bunch wakes holds not only for the corrugated structure, but rather for any flat structure whose beam-cavity interaction can be described by a surface impedance. We use these wakes to obtain, for a short bunch passing through a dechirper: estimates of the energy loss as function of gap, the transverse kick as a function of beam offset, the slice energy spread increase, and the emittance growth. In the Appendix, a more accurate derivation—than that is found in Bane and Stupakov (2015)—of the arbitrary bunch length wakes is performed; we find full agreement with the earlier results, provided the bunches are short compared to the dechirper gap, which is normally the regime of interest.
- Research Organization:
- SLAC National Accelerator Laboratory (SLAC), Menlo Park, CA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- Grant/Contract Number:
- AC02-76SF00515
- OSTI ID:
- 1605006
- Journal Information:
- Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 820, Issue C; ISSN 0168-9002
- Publisher:
- ElsevierCopyright Statement
- Country of Publication:
- United States
- Language:
- English
Web of Science
Fresh-slice multicolour X-ray free-electron lasers
|
journal | October 2016 |
| The Impedance of Flat Metallic Plates with Small Corrugations | text | January 2018 |
| Corrugated structure insertion for extending the SASE bandwidth up to 3% at the European XFEL | text | January 2016 |
Similar Records
Analytical formulas for short bunch wakes in a flat dechirper
Wake measurements of a dechirper jaw with nonzero tilt angle