Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Influence of Binder Coverage on Interfacial Chemistry of Thin Film LiNi0.6Mn 0.2Co0.2O2 Cathodes

Journal Article · · Journal of the Electrochemical Society (Online)
In this work, we explore the influence of binder coverage and chemistry on the interfacial properties of the textured Ni-rich cathode LiNi0.6Mn0.2Co0.2O2. We find that the formation of the cathode/electrolyte interphase (CEI) composition varies significantly for cathodes coated with either poly(vinylene fluoride) (PVDF), carboxymethyl cellulose (CMC), or lithium polyacrylate (LiPAA) after cycling to high upper cutoff voltages (4.5 V vs Li/Li). The PVDF-coated samples had a thinner CEI and twice the relative concentration of LiF and Li2CO3 to LixPOyFz species in the CEI compared to the uncoated sample. This correlated with significantly lower interfacial impedance (285 vs ~1700 Ohm-cm2) and improved capacity retention between cycles of the PVDF-coated samples compared to the other binder compositions and the uncoated sample. CMC-coated samples performed worst, with a CEI comprised of greater amounts of LixPOyFz. In addition, we find the choice of binder results in the selective protection or promotion of electrolyte reactions at the (104) surface of the 622 cathode. This suggests that the choice of binder can impact the surface chemistry and performance of high voltage cathodes and supports an avenue for interest in multifunctional binders for stabilizing the CEI.
Research Organization:
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
Grant/Contract Number:
AC05-00OR22725
OSTI ID:
1602334
Alternate ID(s):
OSTI ID: 1607055
Journal Information:
Journal of the Electrochemical Society (Online), Journal Name: Journal of the Electrochemical Society (Online) Journal Issue: 4 Vol. 167; ISSN 1945-7111
Publisher:
IOP PublishingCopyright Statement
Country of Publication:
United States
Language:
English

References (41)

Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High-Voltage Li-Ion Batteries journal September 2015
Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries journal March 2015
Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids journal February 1979
Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes journal December 2014
An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer journal December 2014
SNIFTIRS investigation of the oxidative decomposition of organic-carbonate-based electrolytes for lithium-ion cells journal July 2000
Ion chromatographic determination of hydrolysis products of hexafluorophosphate salts in aqueous solution journal February 2012
Two-dimensional ion chromatography for the separation of ionic organophosphates generated in thermally decomposed lithium hexafluorophosphate-based lithium ion battery electrolytes journal August 2015
Non-flammable LiNi0.8Co0.1Mn0.1O2 cathode via functional binder; stabilizing high-voltage interface and performance for safer and high-energy lithium rechargeable batteries journal September 2019
Charge Heterogeneity and Surface Chemistry in Polycrystalline Cathode Materials journal March 2018
In situ FT-IR measurement for electrochemical oxidation of electrolyte with ethylene carbonate and diethyl carbonate on cathode active material used in rechargeable lithium batteries journal August 2005
Aging of LiNi1/3Mn1/3Co1/3O2 cathode material upon exposure to H2O journal June 2011
The effect of different binders on electrochemical properties of LiNi1/3Mn1/3Co1/3O2 cathode material in lithium ion batteries journal March 2013
Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode journal October 2016
What makes lithium substituted polyacrylic acid a better binder than polyacrylic acid for silicon-graphite composite anodes? journal April 2018
A carbonate-free, sulfone-based electrolyte for high-voltage Li-ion batteries journal May 2018
Singlet oxygen evolution from layered transition metal oxide cathode materials and its implications for lithium-ion batteries journal October 2018
Surface Modification for Suppressing Interfacial Parasitic Reactions of a Nickel-Rich Lithium-Ion Cathode journal March 2019
Singlet Oxygen Reactivity with Carbonate Solvents Used for Li-Ion Battery Electrolytes journal October 2018
Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon journal September 2017
Synthesis of Ni-Rich Thin-Film Cathode as Model System for Lithium Ion Batteries journal January 2019
Structural Degradation of High Voltage Lithium Nickel Manganese Cobalt Oxide (NMC) Cathodes in Solid-State Batteries and Implications for Next Generation Energy Storage journal January 2020
Ab Initio Modeling of Electrolyte Molecule Ethylene Carbonate Decomposition Reaction on Li(Ni,Mn,Co)O 2 Cathode Surface journal June 2017
In Situ Determination of the Liquid/Solid Interface Thickness and Composition for the Li Ion Cathode LiMn 1.5 Ni 0.5 O 4 journal October 2014
Theoretical Investigations on Oxidative Stability of Solvents and Oxidative Decomposition Mechanism of Ethylene Carbonate for Lithium Ion Battery Use journal December 2009
Simultaneous Measurements and Modeling of the Electrochemical Impedance and the Cyclic Voltammetric Characteristics of Graphite Electrodes Doped with Lithium journal June 1997
Differentiating Contributions to “Ion Transfer” Barrier from Interphasial Resistance and Li + Desolvation at Electrolyte/Graphite Interface journal July 2010
Composition and Growth Behavior of the Surface and Electrolyte Decomposition Layer of/on a Commercial Lithium Ion Battery Li x Ni 1/3 Mn 1/3 Co 1/3 O 2 Cathode Determined by Sputter Depth Profile X-ray Photoelectron Spectroscopy journal December 2013
NiO as a peculiar support for metal nanoparticles in polyols oxidation journal January 2013
Solid‐State Electrochemical Kinetics of Li‐Ion Intercalation into Li1 − xCoO2: Simultaneous Application of Electroanalytical Techniques SSCV, PITT, and EIS journal January 1999
Thermal Decomposition of LiPF[sub 6]-Based Electrolytes for Lithium-Ion Batteries journal January 2005
“Charge-Transfer” Process at Graphite/Electrolyte Interface and the Solvation Sheath Structure of Li[sup +] in Nonaqueous Electrolytes journal January 2007
Optimization of Acetylene Black Conductive Additive and PVDF Composition for High-Power Rechargeable Lithium-Ion Cells journal January 2007
Oxygen Release and Its Effect on the Cycling Stability of LiNi x Mn y Co z O 2 (NMC) Cathode Materials for Li-Ion Batteries journal January 2017
Particles and Polymer Binder Interaction: A Controlling Factor in Lithium-Ion Electrode Performance journal January 2012
Perspective—Fluorinating Interphases journal December 2018
Probing Surface Chemistry Changes Using LiCoO 2 -only Electrodes in Li-Ion Batteries journal January 2018
Decomposition of LiPF 6 in High Energy Lithium-Ion Batteries Studied with Online Electrochemical Mass Spectrometry journal January 2016
Depth-Dependent Redox Behavior of LiNi 0.6 Mn 0.2 Co 0.2 O 2 journal January 2018
Nickel, Manganese, and Cobalt Dissolution from Ni-Rich NMC and Their Effects on NMC622-Graphite Cells journal January 2019
Temperature Dependence of Oxygen Release from LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) Cathode Materials for Li-Ion Batteries journal January 2018

Similar Records

Garnet solid electrolyte blended LiNi0.6Mn0.2Co0.2O2 as high-voltage stable cathodes for advanced lithium-ion batteries
Journal Article · Wed May 04 20:00:00 EDT 2022 · Electrochemistry Communications · OSTI ID:1924433