Highly Contrasting Static Charging and Bias Stress Effects in Pentacene Transistors with Polystyrene Heterostructures Incorporating Oxidizable N , N '-Bis(4-methoxyphenyl)aniline Side Chains as Gate Dielectrics
- Johns Hopkins Univ., Baltimore, MD (United States); Whiting School of Engineering, Johns Hopkins Unive
- Johns Hopkins Univ., Baltimore, MD (United States)
- National Inst. of Standards and Technology, Gaithersburg, MD (United States). Center for Neutron Research
Charge storage and trapping properties of polymer dielectrics govern the charge densities of adjacent semiconductors and greatly influence the on-off switching voltage (threshold voltage, Vth) of organic field-effect transistors (OFETs) when the polymers are used as gate insulators. Intentional charging of polymer dielectrics in OFETs can change Vth and affect the bias stress. We describe a chemical design and fabrication protocol to construct multilayer-stack dielectrics for pentacene-based OFETs using different polystyrene (PS)-based polymers in each layer, with oxidizable N,N-bis(4-methoxyphenyl)anilino (TPAOMe)-substituted styrene copolymers in arbitrary vertical positions in the stacks. Thermal, byproduct-free crosslinking of benzocyclobutene subunits provides integrity to the multilayer structure by preventing dissolution of the previous deposited layer. Neutron reflectivity data verified the multilayer morphology. We compared the Vth shift before and after charging the stacks by application of ±100V across 0.5-1 µm total film thicknesses. Bias stress was the dominant effect in bilayer devices with a TPAOMe layer in contact with the pentacene, indicated by the direction of Vth shift associated with either polarity of external electric field. In structures with no TPAOMe subunit in contact with the pentacene, when charging with -100V on top of the source and drain electrodes, electron injection from pentacene to dielectric was the major charging mechanism, again consistent with the bias stress direction. When charging with +100V, bilayer devices without TPAOMe showed little change in Vth, suggesting there was no bias stress effect or charge injection in these devices for this charging polarity. For the bilayer devices with the TPAOMe layer in the bottom, and the trilayer devices with TPOMe in the middle, when +100V was applied, the Vth shifts were opposite those expected from bias stress. Dipole formation or partial ionization of chargeable groups at the interface between the dielectric layers are likely polarization mechanisms in these cases. A simple analytical model supports the plausibility of these mechanisms. This work provides examples of both stabilization and shifting of Vth, and therefore controlling charge carrier density, in semiconductors overlying the dielectric multilayers.
- Research Organization:
- Johns Hopkins Univ., Baltimore, MD (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
- Contributing Organization:
- NIST
- Grant/Contract Number:
- FG02-07ER46465
- OSTI ID:
- 1593846
- Alternate ID(s):
- OSTI ID: 1539374
- Journal Information:
- Macromolecules, Journal Name: Macromolecules Journal Issue: 15 Vol. 51; ISSN 0024-9297
- Publisher:
- American Chemical SocietyCopyright Statement
- Country of Publication:
- United States
- Language:
- English
Pentafluorosulfanylated polymers as electrets in nonvolatile organic field-effect transistor memory devices
|
journal | January 2019 |
Similar Records
Maximized Hole Trapping in a Polystyrene Transistor Dielectric from a Highly Branched Iminobis(aminoarene) Side Chain
Increased Static Charge–Induced Threshold Voltage Shifts and Memristor Activity in Pentacene OFETs Comprising Polystyrene–Based Gate Dielectrics Containing Electroactive Small Molecule Crystallites