Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries

doi:10.1002/ente.201900194

Title: Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries

Authors:

Dysart, Arthur Dence ^[1]; Cardoza, Neal Amadeus ^[1]; Mitchell, Garrett ^[1]; Ortalan, Volkan ^[2];

^[1]

Davidson School of Chemical EngineeringPurdue University West Lafayette IN 47907 USA
School of Materials EngineeringPurdue University West Lafayette IN 47907 USA

Publication Date:: 2019-05-06

Research Org.:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Org.:: USDOE Office of Science (SC)

OSTI Identifier:: 1577146

Resource Type:: Journal Article

Journal Name:: Energy Technology

Additional Journal Information:: Journal Volume: 7; Journal Issue: 12; Journal ID: ISSN 2194-4288

Publisher:: Wiley

Country of Publication:: United States

Language:: ENGLISH

Citation Formats


                    Dysart, Arthur Dence, Cardoza, Neal Amadeus, Mitchell, Garrett, Ortalan, Volkan, and Pol, Vilas Ganpat. Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries.  United States: N. p., 2019. 
        Web.  doi:10.1002/ente.201900194.

Copy to clipboard


                    Dysart, Arthur Dence, Cardoza, Neal Amadeus, Mitchell, Garrett, Ortalan, Volkan, & Pol, Vilas Ganpat. Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries.  United States.  doi:10.1002/ente.201900194.

Copy to clipboard


                    Dysart, Arthur Dence, Cardoza, Neal Amadeus, Mitchell, Garrett, Ortalan, Volkan, and Pol, Vilas Ganpat. Mon .  
        "Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries".  United States.  doi:10.1002/ente.201900194.

Copy to clipboard


                    
@article{osti_1577146,

  title        = {Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries},

  author       = {Dysart, Arthur Dence and Cardoza, Neal Amadeus and Mitchell, Garrett and Ortalan, Volkan and Pol, Vilas Ganpat},

  abstractNote = {},

  doi          = {10.1002/ente.201900194},

  journal      = {Energy Technology},

  issn         = {2194-4288},

  number       = 12,

  volume       = 7,

  place        = {United States},

  year         = {2019},

  month        = {5}

}

Copy to clipboard

Journal Article:

DOI: 10.1002/ente.201900194

Other availability

Find in Google Scholar

Search WorldCat to find libraries that may hold this journal

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)
journal, October 2015

Thommes, Matthias; Kaneko, Katsumi; Neimark, Alexander V.
Pure and Applied Chemistry, Vol. 87, Issue 9-10
DOI: 10.1515/pac-2014-1117

Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery
journal, November 2011

Chen, Shu-Ru; Zhai, Yun-Pu; Xu, Gui-Liang
Electrochimica Acta, Vol. 56, Issue 26, p. 9549-9555
DOI: 10.1016/j.electacta.2011.03.005

The low-pressure phase diagram of sulfur
journal, February 2011

Ferreira, A. G. M.; Lobo, L. Q.
The Journal of Chemical Thermodynamics, Vol. 43, Issue 2
DOI: 10.1016/j.jct.2010.07.007

Viability of Polysulfide-Retaining Barriers in Li–S Battery
journal, June 2017

Berg, Erik J.; Trabesinger, Sigita
Journal of The Electrochemical Society, Vol. 165, Issue 1
DOI: 10.1149/2.0021801jes

High-performance lithium sulfur batteries enabled by a synergy between sulfur and carbon nanotubes
journal, January 2019

Abdul Razzaq, Amir; Yao, Yuanzhou; Shah, Rahim
Energy Storage Materials, Vol. 16
DOI: 10.1016/j.ensm.2018.05.006

Core-shell meso/microporous carbon host for sulfur loading toward applications in lithium-sulfur batteries
journal, May 2014

Zhang, Juan; Ye, Huan; Yin, Yaxia
Journal of Energy Chemistry, Vol. 23, Issue 3
DOI: 10.1016/S2095-4956(14)60152-2

Enabling High-Energy-Density Cathode for Lithium–Sulfur Batteries
journal, June 2018

Lu, Dongping; Li, Qiuyan; Liu, Jian
ACS Applied Materials & Interfaces, Vol. 10, Issue 27
DOI: 10.1021/acsami.8b05166

Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
journal, September 2013

Park, Jun-Woo; Ueno, Kazuhide; Tachikawa, Naoki
The Journal of Physical Chemistry C, Vol. 117, Issue 40
DOI: 10.1021/jp408037e

A review of recent developments in rechargeable lithium–sulfur batteries
journal, January 2016

Kang, Weimin; Deng, Nanping; Ju, Jingge
Nanoscale, Vol. 8, Issue 37
DOI: 10.1039/C6NR04923K

Reactions under Autogenic Pressure at Elevated Temperature (RAPET) of Various Alkoxides: Formation of Metals/Metal Oxides-Carbon Core-Shell Structures
journal, September 2004

Pol, Swati V.; Pol, Vilas G.; Gedanken, Aharon
Chemistry - A European Journal, Vol. 10, Issue 18
DOI: 10.1002/chem.200400014

An evaluation of the thermodynamic properties and the P, T phase diagram of carbon
journal, January 1986

Gustafson, Per
Carbon, Vol. 24, Issue 2
DOI: 10.1016/0008-6223(86)90113-2

A method to eliminate the background in X-ray diffraction patterns of oriented clay mineral samples
journal, December 1981

Van Der Gaast, S. J.; Vaars, A. J.
Clay Minerals, Vol. 16, Issue 4
DOI: 10.1180/claymin.1981.016.4.07

Healing High-Loading Sulfur Electrodes with Unprecedented Long Cycling Life: Spatial Heterogeneity Control
journal, March 2017

Peng, Hong-Jie; Huang, Jia-Qi; Liu, Xin-Yan
Journal of the American Chemical Society, Vol. 139, Issue 25
DOI: 10.1021/jacs.6b12358

Progress Towards Commercially Viable Li-S Battery Cells
journal, April 2015

Urbonaite, Sigita; Poux, Tiphaine; Novák, Petr
Advanced Energy Materials, Vol. 5, Issue 16
DOI: 10.1002/aenm.201500118

Review on Li-Sulfur Battery Systems: an Integral Perspective
journal, May 2015

Rosenman, Ariel; Markevich, Elena; Salitra, Gregory
Advanced Energy Materials, Vol. 5, Issue 16
DOI: 10.1002/aenm.201500212

Multi-electron reaction materials for high energy density batteries
journal, January 2010

Gao, Xue-Ping; Yang, Han-Xi
Energy Environ. Sci., Vol. 3, Issue 2
DOI: 10.1039/B916098A

Advances in Li–S batteries
journal, January 2010

Ji, Xiulei; Nazar, Linda F.
Journal of Materials Chemistry, Vol. 20, Issue 44, p. 9821-9826
DOI: 10.1039/b925751a

High-Capacity Micrometer-Sized Li₂ S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries
journal, September 2012

Yang, Yuan; Zheng, Guangyuan; Misra, Sumohan
Journal of the American Chemical Society, Vol. 134, Issue 37, p. 15387-15394
DOI: 10.1021/ja3052206

Rechargeable Lithium–Sulfur Batteries
journal, July 2014

Manthiram, Arumugam; Fu, Yongzhu; Chung, Sheng-Heng
Chemical Reviews, Vol. 114, Issue 23
DOI: 10.1021/cr500062v

Novel Synthesis of High Surface Area Silicon Carbide by RAPET (Reactions under Autogenic Pressure at Elevated Temperature) of Organosilanes
journal, April 2005

Pol, Vilas G.; Pol, Swati V.; Gedanken, Aharon
Chemistry of Materials, Vol. 17, Issue 7
DOI: 10.1021/cm048032z

Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable
journal, May 2018

Chung, Sheng-Heng; Chang, Chi-Hao; Manthiram, Arumugam
Advanced Functional Materials, Vol. 28, Issue 28
DOI: 10.1002/adfm.201801188

Does the sulfur cathode require good mixing for a liquid electrolyte lithium/sulfur cell?
journal, June 2013

Zhang, Sheng S.
Electrochemistry Communications, Vol. 31
DOI: 10.1016/j.elecom.2013.02.021

Advanced rechargeable aluminium ion battery with a high-quality natural graphite cathode
journal, February 2017

Wang, Di-Yan; Wei, Chuan-Yu; Lin, Meng-Chang
Nature Communications, Vol. 8, Issue 1
DOI: 10.1038/ncomms14283

Reversibility of electrochemical reactions of sulfur supported on inverse opal carbon in glyme–Li salt molten complex electrolytes
journal, January 2011

Tachikawa, Naoki; Yamauchi, Kento; Takashima, Eriko
Chemical Communications, Vol. 47, Issue 28
DOI: 10.1039/c1cc12415c

Li–O₂ and Li–S batteries with high energy storage
journal, January 2012

Bruce, Peter G.; Freunberger, Stefan A.; Hardwick, Laurence J.
Nature Materials, Vol. 11, Issue 1, p. 19-29
DOI: 10.1038/nmat3191

Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
journal, September 2016

Pang, Quan; Liang, Xiao; Kwok, Chun Yuen
Nature Energy, Vol. 1, Issue 9
DOI: 10.1038/nenergy.2016.132

A review of electrolytes for lithium–sulphur batteries
journal, June 2014

Scheers, Johan; Fantini, Sébastien; Johansson, Patrik
Journal of Power Sources, Vol. 255
DOI: 10.1016/j.jpowsour.2014.01.023

Vapor-Phase Atomic-Controllable Growth of Amorphous Li ₂ S for High-Performance Lithium–Sulfur Batteries
journal, October 2014

Meng, Xiangbo; Comstock, David J.; Fister, Timothy T.
ACS Nano, Vol. 8, Issue 10
DOI: 10.1021/nn505480w

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
journal, May 2009

Ji, Xiulei; Lee, Kyu Tae; Nazar, Linda F.
Nature Materials, Vol. 8, Issue 6, p. 500-506
DOI: 10.1038/nmat2460

Effects of electrolyte concentration and synthesis methods of sulfur/carbon composites on the electrochemical performance in lithium–sulfur batteries
journal, January 2015

Li, Guochun; Zhao, Wen; Liu, Liang
RSC Advances, Vol. 5, Issue 67
DOI: 10.1039/C5RA08939E

Remediating plastic waste into carbon nanotubes
journal, January 2010

Pol, Vilas Ganpat; Thiyagarajan, Pappanan
J. Environ. Monit., Vol. 12, Issue 2
DOI: 10.1039/B914648B

Advanced chemical strategies for lithium–sulfur batteries: A review
journal, January 2018

Fan, Xiaojing; Sun, Wenwei; Meng, Fancheng
Green Energy & Environment, Vol. 3, Issue 1
DOI: 10.1016/j.gee.2017.08.002

X-Ray Diffraction in Random Layer Lattices
journal, May 1941

Warren, B. E.
Physical Review, Vol. 59, Issue 9
DOI: 10.1103/PhysRev.59.693

A Review of Functional Binders in Lithium-Sulfur Batteries
journal, October 2018

Yuan, Hong; Huang, Jia-Qi; Peng, Hong-Jie
Advanced Energy Materials, Vol. 8, Issue 31
DOI: 10.1002/aenm.201802107

Testing Carbon-Coated VO_x Prepared via Reaction under Autogenic Pressure at Elevated Temperature as Li-Insertion Materials
journal, June 2006

Odani, A.; Pol, V. G.; Pol, S. V.
Advanced Materials, Vol. 18, Issue 11, p. 1431-1436
DOI: 10.1002/adma.200501611

Similar records in OSTI.GOV collections:

Direct observation of the redistribution of sulfur and polysufides in Li-S batteries during first cycle by in situ X-Ray fluorescence microscopy

Journal Article Yu, Xiquian ; Pan, Huilin ; Zhou, Yongning ; ... - Advanced Energy Materials

The demands on low cost and high energy density rechargeable batteries for both transportation and large-scale stationary energy storage are stimulating more and more research toward new battery systems. Since sulfur is an earth-abundant material with low cost, research on the high energy density Li–S batteries (2600 W h kg⁻¹) are getting more and more attention. The reactions between sulfur and lithium during charge–discharge cycling are quite complicated, going through multiple electron transfer process associated with chemical and electrochemical equilibrium between long- and short-chain polysulfide Li₂S _x intermediates (1 < x ≤ 8). It is reported that the long-chain polysulfidesmore »« less
Cited by 21
DOI: 10.1002/aenm.201500072

Full Text Available
Olivine Composite Cathode Materials for Improved Lithium Ion Battery Performance

Journal Article Ward, R.M. ; Vaughey, J.T. - Journal of Undergraduate Research

Composite cathode materials in lithium ion batteries have become the subject of a great amount of research recently as cost and safety issues related to LiCoO2 and other layered structures have been discovered. Alternatives to these layered materials include materials with the spinel and olivine structures, but these present different problems, e.g. spinels have low capacities and cycle poorly at elevated temperatures, and olivines exhibit extremely low intrinsic conductivity. Previous work has shown that composite structures containing spinel and layered materials have shown improved electrochemical properties. These types of composite structures have been studied in order to evaluate their performancemore »« less
Full Text Available
Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Journal Article Zheng, Jiaxin ; Ye, Yaokun ; Liu, Tongchao ; ... - Accounts of Chemical Research

Lithium-ion batteries (LIBs) not only power most of today’s hybrid electric vehicles (HEV) and electric vehicles (EV) but also are considered as a very promising system for grid-level storage. Large-scale applications for LIBs require substantial improvement in energy density, cost, and lifetime. Layered Li(NixMnyCoz)O2 (NMC, x+y+z=1) materials from solid-solution approaches to LiMO2 (M = Ni, Mn, Co, etc) are the most promising candidates for their high reversible capacity, better environmental compatibility, and lower cost compared with the traditional LiCoO2. In order to further boost Li storage capacity, a great deal of attention has been directed toward developing Ni-rich NMCs. However,more »« less
DOI: 10.1021/acs.accounts.9b00033
Solvent effects on polysulfide redox kinetics and ionic conductivity in lithium-sulfur batteries

Journal Article Fan, Frank Y. ; Pan, Menghsuan Sam ; Lau, Kah Chun ; ... - Journal of the Electrochemical Society

Lithium-sulfur (Li-S) batteries have high theoretical energy density and low raw materials cost compared to present lithium-ion batteries and are thus promising for use in electric transportation and other applications. A major obstacle for Li-S batteries is low rate capability, especially at the low electrolyte/sulfur (E/S) ratios required for high energy density. Herein, we investigate several potentially rate-limiting factors for Li-S batteries. We study the ionic conductivity of lithium polysulfide solutions of varying concentration and in different ether-based solvents and their exchange current density on glassy carbon working electrodes. We believe this is the first such investigation of exchange currentmore »« less
Cited by 9
DOI: 10.1149/2.1181614jes

Full Text Available
Gel based sulfur cathodes with a high sulfur content and large mass loading for high-performance lithium–sulfur batteries

Journal Article Li, Shiqi ; Mou, Tong ; Ren, Guofeng ; ... - Journal of Materials Chemistry A

A significantly improved conductive matrix design for the sulfur electrode is essential to solve several problems related to sulfur electrochemistry toward the development of practical lithium–sulfur batteries (LSBs). Great progress has been made by using a variety of carbon-based nanostructures for physically and chemically confining soluble polysulfides as well as providing conductive paths. However, most of these electrode designs have a low sulfur content or a low sulfur loading, leading to a low specific capacity or low areal capacity at the electrode level. Herein, intrinsically N- and O-doped carbon nanoribbon (CNR) aerogels, obtained by pyrolysis of bacterial cellulose (BC) aerogels,more »« less
DOI: 10.1039/c6ta09841j

Similar Records

Title: Effect of Synthesis Method Using Varying Types of Micropore Level Sulfur Infiltration on Electrochemical Performance in Lithium–Sulfur Batteries

Citation Formats

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report) journal, October 2015

Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery journal, November 2011

The low-pressure phase diagram of sulfur journal, February 2011

Viability of Polysulfide-Retaining Barriers in Li–S Battery journal, June 2017

High-performance lithium sulfur batteries enabled by a synergy between sulfur and carbon nanotubes journal, January 2019

Core-shell meso/microporous carbon host for sulfur loading toward applications in lithium-sulfur batteries journal, May 2014

Enabling High-Energy-Density Cathode for Lithium–Sulfur Batteries journal, June 2018

Ionic Liquid Electrolytes for Lithium–Sulfur Batteries journal, September 2013

A review of recent developments in rechargeable lithium–sulfur batteries journal, January 2016

Reactions under Autogenic Pressure at Elevated Temperature (RAPET) of Various Alkoxides: Formation of Metals/Metal Oxides-Carbon Core-Shell Structures journal, September 2004

An evaluation of the thermodynamic properties and the P, T phase diagram of carbon journal, January 1986

A method to eliminate the background in X-ray diffraction patterns of oriented clay mineral samples journal, December 1981

Healing High-Loading Sulfur Electrodes with Unprecedented Long Cycling Life: Spatial Heterogeneity Control journal, March 2017

Progress Towards Commercially Viable Li-S Battery Cells journal, April 2015

Review on Li-Sulfur Battery Systems: an Integral Perspective journal, May 2015

Multi-electron reaction materials for high energy density batteries journal, January 2010

Advances in Li–S batteries journal, January 2010

High-Capacity Micrometer-Sized Li2 S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries journal, September 2012

Rechargeable Lithium–Sulfur Batteries journal, July 2014

Novel Synthesis of High Surface Area Silicon Carbide by RAPET (Reactions under Autogenic Pressure at Elevated Temperature) of Organosilanes journal, April 2005

Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable journal, May 2018

Does the sulfur cathode require good mixing for a liquid electrolyte lithium/sulfur cell? journal, June 2013

Advanced rechargeable aluminium ion battery with a high-quality natural graphite cathode journal, February 2017

Reversibility of electrochemical reactions of sulfur supported on inverse opal carbon in glyme–Li salt molten complex electrolytes journal, January 2011

Li–O2 and Li–S batteries with high energy storage journal, January 2012

Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes journal, September 2016

A review of electrolytes for lithium–sulphur batteries journal, June 2014

Vapor-Phase Atomic-Controllable Growth of Amorphous Li 2 S for High-Performance Lithium–Sulfur Batteries journal, October 2014

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries journal, May 2009

Effects of electrolyte concentration and synthesis methods of sulfur/carbon composites on the electrochemical performance in lithium–sulfur batteries journal, January 2015

Remediating plastic waste into carbon nanotubes journal, January 2010

Advanced chemical strategies for lithium–sulfur batteries: A review journal, January 2018

X-Ray Diffraction in Random Layer Lattices journal, May 1941

A Review of Functional Binders in Lithium-Sulfur Batteries journal, October 2018

Testing Carbon-Coated VOx Prepared via Reaction under Autogenic Pressure at Elevated Temperature as Li-Insertion Materials journal, June 2006

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)
journal, October 2015

Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery
journal, November 2011

The low-pressure phase diagram of sulfur
journal, February 2011

Viability of Polysulfide-Retaining Barriers in Li–S Battery
journal, June 2017

High-performance lithium sulfur batteries enabled by a synergy between sulfur and carbon nanotubes
journal, January 2019

Core-shell meso/microporous carbon host for sulfur loading toward applications in lithium-sulfur batteries
journal, May 2014

Enabling High-Energy-Density Cathode for Lithium–Sulfur Batteries
journal, June 2018

Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
journal, September 2013

A review of recent developments in rechargeable lithium–sulfur batteries
journal, January 2016

Reactions under Autogenic Pressure at Elevated Temperature (RAPET) of Various Alkoxides: Formation of Metals/Metal Oxides-Carbon Core-Shell Structures
journal, September 2004

An evaluation of the thermodynamic properties and the P, T phase diagram of carbon
journal, January 1986

A method to eliminate the background in X-ray diffraction patterns of oriented clay mineral samples
journal, December 1981

Healing High-Loading Sulfur Electrodes with Unprecedented Long Cycling Life: Spatial Heterogeneity Control
journal, March 2017

Progress Towards Commercially Viable Li-S Battery Cells
journal, April 2015

Review on Li-Sulfur Battery Systems: an Integral Perspective
journal, May 2015

Multi-electron reaction materials for high energy density batteries
journal, January 2010

Advances in Li–S batteries
journal, January 2010

High-Capacity Micrometer-Sized Li₂ S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion Batteries
journal, September 2012

Rechargeable Lithium–Sulfur Batteries
journal, July 2014

Novel Synthesis of High Surface Area Silicon Carbide by RAPET (Reactions under Autogenic Pressure at Elevated Temperature) of Organosilanes
journal, April 2005

Progress on the Critical Parameters for Lithium-Sulfur Batteries to be Practically Viable
journal, May 2018

Does the sulfur cathode require good mixing for a liquid electrolyte lithium/sulfur cell?
journal, June 2013

Advanced rechargeable aluminium ion battery with a high-quality natural graphite cathode
journal, February 2017

Reversibility of electrochemical reactions of sulfur supported on inverse opal carbon in glyme–Li salt molten complex electrolytes
journal, January 2011

Li–O₂ and Li–S batteries with high energy storage
journal, January 2012

Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
journal, September 2016

A review of electrolytes for lithium–sulphur batteries
journal, June 2014

Vapor-Phase Atomic-Controllable Growth of Amorphous Li ₂ S for High-Performance Lithium–Sulfur Batteries
journal, October 2014

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
journal, May 2009

Effects of electrolyte concentration and synthesis methods of sulfur/carbon composites on the electrochemical performance in lithium–sulfur batteries
journal, January 2015

Remediating plastic waste into carbon nanotubes
journal, January 2010

Advanced chemical strategies for lithium–sulfur batteries: A review
journal, January 2018

X-Ray Diffraction in Random Layer Lattices
journal, May 1941

A Review of Functional Binders in Lithium-Sulfur Batteries
journal, October 2018

Testing Carbon-Coated VO_x Prepared via Reaction under Autogenic Pressure at Elevated Temperature as Li-Insertion Materials
journal, June 2006