Modeling the strength and ductility of magnesium alloys containing nanotwins

Journal Article · Tue Jan 01 00:00:00 EST 2013 · Materials Research Society Symposia Proceedings

DOI:https://doi.org/10.1557/opl.2013.499· OSTI ID:1567665

Gorti, S. B. ^[1]; Radhakrishnan, B. ^[1]

---

1. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Computer Science and Mathematics Div.

ABSTRACT Magnesium alloys have been receiving much attention recently as potential lightweight alternatives to steel for automotive and other applications, but the poor formability of these alloys at low temperatures has limited their widespread adoption for automotive applications. Recent work with face centered cubic (FCC) materials has shown that introduction of twins at the nanometer scale in ultra-fine grained FCC polycrystals can provide significant increase in strength with a simultaneous improvement in ductility. This objective of this work is to explore the feasibility of extending this concept to hexagonal close packed (HCP) materials, with particular focus on using this approach to increase both strength and ductility of magnesium alloys. A crystal plasticity based finite element (CPFE) model is used to study the effect of varying the crystallographic texture and the spacing between the nanoscale twins on the strength and ductility of HCP polycrystals. Deformation of the material is assumed to occur by crystallographic slip, and in addition to the basal and prismatic slip systems, slip is also assumed to occur on the {1 0$$\bar 1$$1} planes that are associated with compression twins in these materials. The slip system strength of the pyramidal systems containing the nanotwins is assumed to be much lower than the strength of the other systems, which is assumed to scale with the spacing between the nanotwins. The CPFE model is used to compute the stress-strain response for different microstrucrutral parameters, and a criterion based on a critical slip system shear strain and a critical hydrostatic stress is used to compute the limiting strength and ductility, with the ultimate goal of identifying the texture and nanotwin spacing that can lead to the optimum values for these parameters.

• Research Organization: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Oak Ridge Leadership Computing Facility (OLCF)
• Sponsoring Organization: USDOE Office of Science (SC)
• OSTI ID: 1567665
• Journal Information: Materials Research Society Symposia Proceedings, Vol. 1513; Conference: Symposium GG – Mechanical Behavior of Metallic Nanostructured Materials; ISSN 0272-9172
• Country of Publication: United States
• Language: English