Manufacturing Oxide Dispersion-Strengthened (ODS) Steel Fuel Cladding Tubes Using the Cold Spray Process

Lenling, Mia; Yeom, Hwasung; Maier, Benjamin; Johnson, Greg; Dabney, Tyler; Graham, Jeffrey; Hosemann, Peter; Hoelzer, David; Maloy, Stuart; Sridharan, Kumar

doi:10.1007/s11837-019-03582-w

Title: Manufacturing Oxide Dispersion-Strengthened (ODS) Steel Fuel Cladding Tubes Using the Cold Spray Process

Journal Article · Tue Jun 11 00:00:00 EDT 2019 · JOM. Journal of the Minerals, Metals & Materials Society

DOI:https://doi.org/10.1007/s11837-019-03582-w· OSTI ID:1550729

^[1]; Yeom, Hwasung ^[1]; Maier, Benjamin ^[1]; Johnson, Greg ^[1]; Dabney, Tyler ^[1]; Graham, Jeffrey ^[2]; Hosemann, Peter ^[2];

^[3]; Maloy, Stuart ^[4]; Sridharan, Kumar ^[1]

Univ. of Wisconsin, Madison, WI (United States)
Univ. of California, Berkeley, CA (United States)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

The cold spray materials deposition process has been explored for manufacturing oxide dispersion-strengthened (ODS) steel fuel cladding tubes. Gas-atomized 14YWT ODS steel powder was used as the feedstock material. A parametric investigation of the cold spray process involving substrate materials of various hardnesses, gas preheat temperatures, and carrier gas compositions was performed to gain the highest quality deposit. The high-velocity impact of the powder on the substrate led to dissolution of discrete oxide nanoparticles, which subsequently reprecipitated during postdeposition annealing at high temperatures. The tubes were manufactured by deposition on an Al-alloy mandrel substrate and subsequent chemical dissolution of the substrate. A 204-mm-long and 1-mm-thick ODS steel cladding tube was successfully manufactured. The grain growth and distribution of oxide nanoparticles in ferritic steel matrix were identified at elevated temperatures. In general, the cold spray process holds considerable promise for rapid, cost-effective manufacturing of ODS steel cladding tubes.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

Grant/Contract Number:: AC05-00OR22725; NE0008682

OSTI ID:: 1550729

Journal Information:: JOM. Journal of the Minerals, Metals & Materials Society, Vol. 71, Issue 8; ISSN 1047-4838

Publisher:: SpringerCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 8 works

Citation information provided by
Web of Science

References (24)

Radiation resistance and thermal creep of ODS ferritic steels Sagaradze, V. V.; Shalaev, V. I.; Arbuzov, V. L. Journal of Nuclear Materials, Vol. 295, Issue 2-3 https://doi.org/10.1016/S0022-3115(01)00511-6	journal	June 2001
Fabrication and mechanical properties of an oxide-dispersion-strengthened FeCrAl alloy Park, Dong Jun; Kim, Hyun Gil; Jung, Yang Il Fusion Engineering and Design, Vol. 139 https://doi.org/10.1016/j.fusengdes.2019.01.001	journal	February 2019
Improving deposition efficiency in cold spraying chromium coatings by powder annealing Yeom, Hwasung; Dabney, Tyler; Johnson, Greg The International Journal of Advanced Manufacturing Technology, Vol. 100, Issue 5-8 https://doi.org/10.1007/s00170-018-2784-1	journal	October 2018
High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys Aydogan, E.; El-Atwani, O.; Takajo, S. Acta Materialia, Vol. 148 https://doi.org/10.1016/j.actamat.2018.02.006	journal	April 2018
Influence of Gas Temperature on Microstructure and Properties of Cold Spray 304SS Coating Meng, Xianming; Zhang, Junbao; Zhao, Jie Journal of Materials Science & Technology, Vol. 27, Issue 9 https://doi.org/10.1016/S1005-0302(11)60147-3	journal	September 2011
Mechanical properties of irradiated ODS-EUROFER and nanocluster strengthened 14YWT McClintock, D. A.; Sokolov, M. A.; Hoelzer, D. T. Journal of Nuclear Materials, Vol. 392, Issue 2 https://doi.org/10.1016/j.jnucmat.2009.03.024	journal	July 2009
Development of Cold Spray Coatings for Accident-Tolerant Fuel Cladding in Light Water Reactors Maier, Benjamin; Yeom, Hwasung; Johnson, Greg JOM, Vol. 70, Issue 2 https://doi.org/10.1007/s11837-017-2643-9	journal	November 2017
Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats Bedard, Benjamin A.; Flanagan, Tyler J.; Ernst, Alexis T. Journal of Thermal Spray Technology, Vol. 27, Issue 8 https://doi.org/10.1007/s11666-018-0785-0	journal	November 2018
Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray Rokni, M. R.; Nutt, S. R.; Widener, C. A. Journal of Thermal Spray Technology, Vol. 26, Issue 6 https://doi.org/10.1007/s11666-017-0575-0	journal	June 2017
Optimisation of stainless steel cold spray coatings using mixed particle size distributions Spencer, K.; Zhang, M. -X. Surface and Coatings Technology, Vol. 205, Issue 21-22 https://doi.org/10.1016/j.surfcoat.2011.05.020	journal	August 2011
Cold spray deposition of 316L stainless steel coatings on aluminium surface with following laser post-treatment Sova, A.; Grigoriev, S.; Okunkova, A. Surface and Coatings Technology, Vol. 235 https://doi.org/10.1016/j.surfcoat.2013.07.052	journal	November 2013
Characterization of precipitates in MA/ODS ferritic alloys Miller, M. K.; Russell, K. F.; Hoelzer, D. T. Journal of Nuclear Materials, Vol. 351, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2006.02.004	journal	June 2006
Preliminary Tube Manufacturing of Oxide Dispersion Strengthened Ferritic Steels with Recrystallized Structure Ukai, Shigeharu; Yoshitake, Tsunemitsu; Mizuta, Syunji Journal of Nuclear Science and Technology, Vol. 36, Issue 8 https://doi.org/10.1080/18811248.1999.9726259	journal	August 1999
Gas Dynamic Principles of Cold Spray Dykhuizen, R. C.; Smith, M. F. Journal of Thermal Spray Technology, Vol. 7, Issue 2 https://doi.org/10.1361/105996398770350945	journal	June 1998
Effect of bulk oxygen on 14YWT nanostructured ferritic alloys Cunningham, N. J.; Wu, Y.; Etienne, A. Journal of Nuclear Materials, Vol. 444, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.09.013	journal	January 2014
Stability of ferritic MA/ODS alloys at high temperatures Miller, M. K.; Hoelzer, D. T.; Kenik, E. A. Intermetallics, Vol. 13, Issue 3-4 https://doi.org/10.1016/j.intermet.2004.07.036	journal	March 2005
Influence of particle dispersions on the high-temperature strength of ferritic alloys Hoelzer, D. T.; Bentley, J.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 367-370, p. 166-172 https://doi.org/10.1016/j.jnucmat.2007.03.151	journal	August 2007
The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys Wu, Yuan; Ciston, Jim; Kräemer, Stephan Acta Materialia, Vol. 111 https://doi.org/10.1016/j.actamat.2016.03.031	journal	June 2016
Tube manufacturing and mechanical properties of oxide dispersion strengthened ferritic steel Ukai, S.; Harada, M.; Okada, H. Journal of Nuclear Materials, Vol. 204 https://doi.org/10.1016/0022-3115(93)90201-9	journal	September 1993
Cold spray deposition of Ti2AlC coatings for improved nuclear fuel cladding Maier, Benjamin R.; Garcia-Diaz, Brenda L.; Hauch, Benjamin Journal of Nuclear Materials, Vol. 466 https://doi.org/10.1016/j.jnucmat.2015.06.028	journal	November 2015
Bonding mechanism in cold gas spraying Assadi, Hamid; Gärtner, Frank; Stoltenhoff, Thorsten Acta Materialia, Vol. 51, Issue 15 https://doi.org/10.1016/S1359-6454(03)00274-X	journal	September 2003
Laser assisted cold spray of Fe–Ni–Zr oxide dispersion strengthened steel Story, William A.; Barton, Dallin J.; Hornbuckle, B. Chad Materialia, Vol. 3 https://doi.org/10.1016/j.mtla.2018.08.028	journal	November 2018
Microstructure and mechanical properties of cold sprayed 6061 Al in As-sprayed and heat treated condition Rokni, M. R.; Widener, C. A.; Ozdemir, O. C. Surface and Coatings Technology, Vol. 309 https://doi.org/10.1016/j.surfcoat.2016.12.035	journal	January 2017
Stability of Ferritic MA/ODS Alloys at High Temperatures Miller, Michael K.; Hoelzer, David T.; Kenik, Edward A. Microscopy and Microanalysis, Vol. 10, Issue S02 https://doi.org/10.1017/s1431927604881169	journal	August 2004

Similar Records

Cold spray manufacturing of oxide-dispersion strengthened (ODS) steels using gas-atomized and ball-milled 14YWT powders

Journal Article · Mon Dec 05 00:00:00 EST 2022 · Journal of Nuclear Materials · OSTI ID:1550729

Yeom, Hwasung; Hoelzer, David; Maloy, Stuart; +1 more

Characterization of Tubing from Advanced ODS alloy (FCRD-NFA1)

Technical Report · Tue Sep 20 00:00:00 EDT 2016 · OSTI ID:1550729

Maloy, Stuart Andrew; Aydogan, Eda; Anderoglu, Osman; +6 more

Manufacturing Oxide Dispersion Strengthened (ODS) steel plate via cold spray and friction stir processing

Journal Article · Mon Apr 08 00:00:00 EDT 2024 · Journal of Nuclear Materials · OSTI ID:1550729

Wang, Xiang; Zhang, Dalong; Darsell, Jens T.; +8 more

Related Subjects

36 MATERIALS SCIENCE

Title: Manufacturing Oxide Dispersion-Strengthened (ODS) Steel Fuel Cladding Tubes Using the Cold Spray Process

Citation Formats

References (24)

Similar Records

Related Subjects