Electrochemical Evaluation of Pyrite Films Prepared by Plasma Spraying
- Sandia National Laboratories
Thermally activated batteries use electrodes that are typically fabricated by cold pressing of powder. In the LiSi/FeS2 system, natural (mineral) pyrite is used for the cathode. In an effort to increase the energy density and specific energy of these batteries, flame and plasma spraying to form thin films of pyrite cathodes were evaluated. The films were deposited on a 304 stainless steel substrate (current collector) and were characterized by scanning electron microscopy and x-ray dlfllaction. The films were electrochemically tested in single cells at 5000C and the petiormance compared to that of standard cells made with cold-pressed powders. The best results were obtained with material deposited by de-arc plasma spraying with a proprietq additive to suppress thermal decomposion of the pyrite.
- Research Organization:
- Sandia National Laboratories, Albuquerque, NM, and Livermore, CA
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 1538
- Report Number(s):
- SAND98-2444C; ON: DE00001538
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal-sprayed, thin-film pyrite cathodes for thermal batteries -- Discharge-rate and temperature studies in single cells
Evaluation of plasma-sprayed CoS{sub 2} cathodes for thermal batteries