Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Adsorbents and adsorption models for capture of Kr and Xe gas mixtures in fixed-bed columns

Journal Article · · Chemical Engineering Journal
 [1];  [1];  [2];  [2];  [2];  [3];  [4];  [1]
  1. Georgia Inst. of Technology, Atlanta, GA (United States)
  2. Idaho National Lab. (INL), Idaho Falls, ID (United States)
  3. Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
  4. Georgia Inst. of Technology, Atlanta, GA (United States); Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
+ Show Author Affiliations
Off-gases produced during the reprocessing of used nuclear fuel (UNF) include 129-I2, 3-HHO, 14-CO2, 85-Kr, and 135-Xe, which are volatilized out into the off-gas. In order to meet regulatory requirements for reprocessing plant emissions, these gases must be captured and removed from the o?-gas stream prior to o?-gas emission. Of particular interest are the noble gases, Kr and Xe, which can be fairly difficult to remove from the off-gas due to their low chemical reactivity. Thus, this work is focused on utilizing engineered adsorbents, AgZ-PAN and HZ-PAN, to capture Kr and Xe from a mixed-gas stream at relatively low temperatures (191–295 K) and various flow rates (50–2000 mL/min). Isothermal data for Kr and Xe on each adsorbent are analyzed to produce the Langmuir parameters needed to model the mixture adsorption capacities at relevant temperatures using the Extended Langmuir model. Those parameters are then incorporated into a fixed-bed adsorption model developed in this work using the Mulitphysics Object-Oriented Simulation Environment (MOOSE). That model is used to simulate breakthrough times for Kr and Xe in packed columns of AgZ-PAN and HZ-PAN, ranging in length from 6 to 20 in., at relevant temperatures and flow rates. Breakthrough times varied from nearly instantaneous for Kr in AgZ-PAN to 30 h for Xe in HZ-PAN. After the developed model was validated by comparisons with experimental break-through data, the model framework was used to simulate the performance of multiple fixed-bed columns connected in series.
Research Organization:
Idaho National Laboratory (INL), Idaho Falls, ID (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
US DOE-NE; USDOE
Grant/Contract Number:
AC05-00OR22725; AC07-05ID14517
OSTI ID:
1530817
Alternate ID(s):
OSTI ID: 1529721
OSTI ID: 1531240
Report Number(s):
INL/JOU-19-53948-Rev000
Journal Information:
Chemical Engineering Journal, Journal Name: Chemical Engineering Journal Journal Issue: C Vol. 375; ISSN 1385-8947
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

Figures / Tables (14)

Figure 1(p. 8)figure Figure 1
Table 1(p. 10)table Table 1
Table 2(p. 10)table Table 2
Table 3(p. 11)table Table 3
Table 4(p. 17)table Table 4
Figure 2(p. 22)figure Figure 2
Figure 3(p. 22)figure Figure 3
Table 5(p. 22)table Table 5
Figure 4(p. 23)figure Figure 4
Figure 5(p. 25)figure Figure 5
Figure 6(p. 25)figure Figure 6
Figure 7(p. 28)figure Figure 7
Figure 8(p. 28)figure Figure 8
Figure 9(p. 31)figure Figure 9

Similar Records

Adsorption Isotherms for Xenon and Krypton using INL HZ-PAN and AgZ-PAN Sorbents
Technical Report · Thu Jul 31 20:00:00 EDT 2014 · OSTI ID:1170318

Related Subjects

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS
MOOSE
OSPREY
adsorption
discontinuous Galerkin
krypton
modeling
xenon