Achieving ultra-high bearing strength of tungsten nanoribbons in a transforming metal matrix

Guo, Fangmin; Hao, Shijie; Jiang, Xiaohua; Jiang, Daqiang; Cui, Lishan; Ren, Yang

doi:10.1016/j.jallcom.2018.11.363

Title: Achieving ultra-high bearing strength of tungsten nanoribbons in a transforming metal matrix

Journal Article · Wed Nov 28 00:00:00 EST 2018 · Journal of Alloys and Compounds

DOI:https://doi.org/10.1016/j.jallcom.2018.11.363· OSTI ID:1524241

^[1]; Hao, Shijie ^[1]; Jiang, Xiaohua ^[1]; Jiang, Daqiang ^[1]; Cui, Lishan ^[1]; Ren, Yang ^[2]

China Univ. of Petroleum, Beijing (China)
Argonne National Lab. (ANL), Argonne, IL (United States)

Nanowires (or nanoribbons) were identified as the most potential structural reinforcements for composites due to their ultrahigh strength, but it is difficult to transcribe their ultrahigh strength into the composite. Here, an in-situ W nanoribbbons-NiTi matrix composite was fabricated by mechanical reduction of a W-NiTi ingot, and the micromechanical deformation behavior was studied by in-situ high energy X-ray diffraction during tensile loading-unloading. It is revealed that the large elastic deformation of the W nanoribbons in a NiTi matrix is dictated by and synchronized with the martensitic transformation of the matrix. The bearing strength of the W nanoribbons, up to 11.6 GPa, was achieved in this composite. A significant load transfer took place from the matrix to the nanoribbons, exhibiting the characters of locality and rapidity. In conclusion, the stress fraction carried by the W nanoribbons with the volume fraction of 3% is up to 45% for the strength of the composite.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES); National Science Foundation of China

Grant/Contract Number:: AC02-06CH11357

OSTI ID:: 1524241

Alternate ID(s):: OSTI ID: 1636629

Journal Information:: Journal of Alloys and Compounds, Vol. 781, Issue C; ISSN 0925-8388

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

References (37)

In situ characterization of tensile-bending load bearing ability of multi-walled carbon nanotubes in alumina-based nanocomposites Estili, Mehdi; Kawasaki, Akira; Pittini-Yamada, Yoko Journal of Materials Chemistry, Vol. 21, Issue 12 https://doi.org/10.1039/c0jm03906c	journal	January 2011
In situ preparation of TiB nanowires for high-performance Ti metal matrix nanocomposites Huang, Liqing; Qian, Ma; Liu, Zuming Journal of Alloys and Compounds, Vol. 735 https://doi.org/10.1016/j.jallcom.2017.11.238	journal	February 2018
AlN nanowires for Al-based composites with high strength and low thermal expansion Tang, Y. B.; Liu, Y. Q.; Sun, C. H. Journal of Materials Research, Vol. 22, Issue 10 https://doi.org/10.1557/JMR.2007.0368	journal	October 2007
Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites Wanner, Alexander; Dunand, David C. Metallurgical and Materials Transactions A, Vol. 31, Issue 11 https://doi.org/10.1007/BF02830344	journal	November 2000
Strengthening behavior in SiC nanowires reinforced pure Al composite Xin, Ling; Yang, Wenshu; Zhao, Qiqi Journal of Alloys and Compounds, Vol. 695 https://doi.org/10.1016/j.jallcom.2016.11.134	journal	February 2017
Approaching the Theoretical Elastic Strain Limit in Copper Nanowires Yue, Yonghai; Liu, Pan; Zhang, Ze Nano Letters, Vol. 11, Issue 8 https://doi.org/10.1021/nl201233u	journal	August 2011
Ultrahigh Strength Single Crystalline Nanowhiskers Grown by Physical Vapor Deposition Richter, Gunther; Hillerich, Karla; Gianola, Daniel S. Nano Letters, Vol. 9, Issue 8 https://doi.org/10.1021/nl9015107	journal	August 2009
Mechanics of Ultra-Strength Materials Zhu, Ting; Li, Ju; Ogata, Shigenobu MRS Bulletin, Vol. 34, Issue 3 https://doi.org/10.1557/mrs2009.47	journal	March 2009
High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires Huang, Liqing; Wang, Lihua; Qian, Ma Scripta Materialia, Vol. 141 https://doi.org/10.1016/j.scriptamat.2017.08.007	journal	December 2017
Progress on discontinuously reinforced titanium matrix composites Jiao, Yang; Huang, Lujun; Geng, Lin Journal of Alloys and Compounds, Vol. 767 https://doi.org/10.1016/j.jallcom.2018.07.100	journal	October 2018
Novel method to synthesize SiC nanowires and effect of SiC nanowires on flexural strength of Cf/SiC composite Yang, Bin; Chen, Ning; Hao, Guirong Materials & Design (1980-2015), Vol. 52 https://doi.org/10.1016/j.matdes.2013.05.087	journal	December 2013
Significant improvement of mechanical properties of carbon/carbon composites by in situ growth of SiC nanowires Fu, Qian-gang; Tan, Bi-yi; Zhuang, Lei Materials Science and Engineering: A, Vol. 672 https://doi.org/10.1016/j.msea.2016.07.001	journal	August 2016
High-Strength Konjac Glucomannan/Silver Nanowires Composite Films with Antibacterial Properties Lei, Jia; Zhou, Lei; Tang, Yongjian Materials, Vol. 10, Issue 5 https://doi.org/10.3390/ma10050524	journal	May 2017
High content SiC nanowires reinforced Al composite with high strength and plasticity Dong, Ronghua; Yang, Wenshu; Wu, Ping Materials Science and Engineering: A, Vol. 630 https://doi.org/10.1016/j.msea.2015.02.013	journal	April 2015
Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites Ryu, Ho J.; Cha, Seung I.; Hong, Soon H. Journal of Materials Research, Vol. 18, Issue 12 https://doi.org/10.1557/JMR.2003.0398	journal	December 2003
Increased Interface Strength in Carbon Fiber Composites through a ZnO Nanowire Interphase Lin, Yirong; Ehlert, Gregory; Sodano, Henry A. Advanced Functional Materials, Vol. 19, Issue 16 https://doi.org/10.1002/adfm.200900011	journal	August 2009
Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC Liu, X. Q.; Li, C. J.; Yi, J. H. Journal of Alloys and Compounds, Vol. 765 https://doi.org/10.1016/j.jallcom.2018.06.170	journal	October 2018
A new criterion for elasto-plastic transition in nanomaterials: Application to size and composite effects on Cu–Nb nanocomposite wires Thilly, Ludovic; Petegem, Steven Van; Renault, Pierre-Olivier Acta Materialia, Vol. 57, Issue 11 https://doi.org/10.1016/j.actamat.2009.03.021	journal	June 2009
Ideal Pure Shear Strength of Aluminum and Copper Ogata, S. Science, Vol. 298, Issue 5594 https://doi.org/10.1126/science.1076652	journal	October 2002
A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High Strength Hao, Shijie; Cui, Lishan; Jiang, Daqiang Science, Vol. 339, Issue 6124, p. 1191-1194 https://doi.org/10.1126/science.1228602	journal	March 2013
Physical metallurgy of Ti–Ni-based shape memory alloys Otsuka, K.; Ren, X. Progress in Materials Science, Vol. 50, Issue 5 https://doi.org/10.1016/j.pmatsci.2004.10.001	journal	July 2005
In situ synchrotron high-energy X-ray diffraction study of microscopic deformation behavior of a hard-soft dual phase composite containing phase transforming matrix Zhang, Junsong; Hao, Shijie; Jiang, Daqiang Acta Materialia, Vol. 130 https://doi.org/10.1016/j.actamat.2017.03.052	journal	May 2017
Phase-stress partition and stress-induced martensitic transformation in NbTi/NiTi nanocomposite Hao, S. J.; Jiang, D. Q.; Cui, L. S. Applied Physics Letters, Vol. 99, Issue 8 https://doi.org/10.1063/1.3629768	journal	August 2011
Load partitioning in honeycomb-like silicon carbide aluminum alloy composites Wilkes, T. E.; Harder, B. J.; Almer, J. D. Acta Materialia, Vol. 57, Issue 20 https://doi.org/10.1016/j.actamat.2009.08.050	journal	December 2009
Structural investigations of Fe-Ga alloys by high-energy x-ray diffraction Nie, Zhihua; Wang, Zilong; Liang, Yanbin Journal of Alloys and Compounds, Vol. 763 https://doi.org/10.1016/j.jallcom.2018.05.327	journal	September 2018
The structure of TiNi martensite Michal, G. M.; Sinclair, R. Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry, Vol. 37, Issue 10 https://doi.org/10.1107/S0567740881007292	journal	October 1981
Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading Young, M. L.; Wagner, M. F. -X.; Frenzel, J. Acta Materialia, Vol. 58, Issue 7 https://doi.org/10.1016/j.actamat.2009.12.021	journal	April 2010
High energy X-ray diffraction study of the relationship between the macroscopic mechanical properties and microstructure of irradiated HT-9 steel Tomchik, C.; Almer, J.; Anderoglu, O. Journal of Nuclear Materials, Vol. 475 https://doi.org/10.1016/j.jnucmat.2016.03.023	journal	July 2016
Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles Bacon, D. H.; Edwards, L.; Moffatt, J. E. Acta Materialia, Vol. 59, Issue 9 https://doi.org/10.1016/j.actamat.2011.02.012	journal	May 2011
An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels Jia, N.; Cong, Z. H.; Sun, X. Acta Materialia, Vol. 57, Issue 13 https://doi.org/10.1016/j.actamat.2009.05.002	journal	August 2009
Micromechanical behavior of TRIP-assisted multiphase steels studied with in situ high-energy X-ray diffraction Fu, B.; Yang, W. Y.; Wang, Y. D. Acta Materialia, Vol. 76 https://doi.org/10.1016/j.actamat.2014.05.029	journal	September 2014
Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel Young, M. L.; Almer, J. D.; Daymond, M. R. Acta Materialia, Vol. 55, Issue 6 https://doi.org/10.1016/j.actamat.2006.11.004	journal	April 2007
In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X-ray Diffraction Roy, Siddhartha; Gibmeier, Jens; Wanner, Alexander Advanced Engineering Materials, Vol. 11, Issue 6 https://doi.org/10.1002/adem.200800352	journal	June 2009
Load partitioning during compressive loading of a Mg/MgB2 composite Young, M. L.; DeFouw, J.; Almer, J. D. Acta Materialia, Vol. 55, Issue 10 https://doi.org/10.1016/j.actamat.2007.01.046	journal	June 2007
Martensite phase stress and the strengthening mechanism in TRIP steel by neutron diffraction Harjo, Stefanus; Tsuchida, Noriyuki; Abe, Jun Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-15252-5	journal	November 2017
In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten Wang, Jiangwei; Zeng, Zhi; Weinberger, Christopher R. Nature Materials, Vol. 14, Issue 6 https://doi.org/10.1038/nmat4228	journal	March 2015
Stress-induced nanoscale phase transition in superelastic NiTi by in situ X-ray diffraction Ahadi, Aslan; Sun, Qingping Acta Materialia, Vol. 90 https://doi.org/10.1016/j.actamat.2015.02.024	journal	May 2015

Cited By (1)

“Lattice Strain Matching”‐Enabled Nanocomposite Design to Harness the Exceptional Mechanical Properties of Nanomaterials in Bulk Forms Zhang, Junsong; Liu, Yinong; Cui, Lishan Advanced Materials, Vol. 32, Issue 18 https://doi.org/10.1002/adma.201904387	journal	September 2019

Similar Records

Achieving large linear elasticity and high strength in bulk nanocompsite via synergistic effect

Journal Article · Mon Mar 09 00:00:00 EDT 2015 · Scientific Reports · OSTI ID:1524241

Hao, Shijie; Cui, Lishan; Guo, Fangmin; +5 more

A nano lamella NbTi–NiTi composite with high strength

Journal Article · Fri May 01 00:00:00 EDT 2015 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1524241

Jiang, Jiang; Jiang, Daqiang; Hao, Shijie; +6 more

Dual Phase Synergy Enabled Large Elastic Strains of Nanoinclusions in a Dislocation Slip Matrix Composite

Journal Article · Tue May 01 00:00:00 EDT 2018 · Nano Letters · OSTI ID:1524241

Zhang, Junsong; Hao, Shijie; Jiang, Daqiang; +5 more

Related Subjects

36 MATERIALS SCIENCE
bearing strength
high energy x-ray diffraction
martensitic transformation
shape memory alloy
tungsten nanoribbons

Title: Achieving ultra-high bearing strength of tungsten nanoribbons in a transforming metal matrix

Citation Formats

References (37)

Cited By (1)

Similar Records

Related Subjects