Role of Surface Contamination in Titanium PM
|
journal
|
August 2012 |
Fatigue Property Enhancement of .ALPHA.-.BETA. Titanium Alloys by Blended Elemental P/M Approach.
|
journal
|
January 1991 |
Titanium Metal: Extraction to Application
|
book
|
September 2013 |
Metallic Titanium.
|
journal
|
March 1910 |
Phase Transformations and Formation of Ultra-Fine Microstructure During Hydrogen Sintering and Phase Transformation (HSPT) Processing of Ti-6Al-4V
|
journal
|
September 2015 |
Hydrogen Sintering of Titanium to Produce High Density Fine Grain Titanium Alloys
|
journal
|
April 2012 |
Increased Shape Stability and Porosity of Highly Porous Injection-Molded Titanium Parts: Increased Shape Stability and Porosity…
|
journal
|
April 2015 |
The Development of a Ti-6Al-4V Alloy via Oxygen Solid Solution Strengthening for Aerospace & Defense Applications
|
journal
|
May 2013 |
Producing titanium powder by continuous vapor-phase reduction
|
journal
|
November 1998 |
The production of low-cost titanium powders
|
journal
|
September 1998 |
New Powder Metallurgical Approach to Achieve High Fatigue Strength in Ti-6Al-4V Alloy
|
journal
|
February 2016 |
Titanium for Automotive Applications: Challenges and Opportunities in Materials and Processing
|
journal
|
April 2012 |
Production of titanium by the Armstrong Process®
|
book
|
January 2015 |
A literature review of titanium metallurgical processes
|
journal
|
July 2011 |
Innovative consolidation of titanium and titanium alloy powders by direct rolling
|
journal
|
July 2011 |
Densification and Microstructural Behaviour on the Sintering of Blended Elemental Ti-35Nb-7Zr-5Ta Alloy
|
journal
|
November 2006 |
Effect of Hot Isostatic Pressing Conditions and Cooling Rate on Microstructure and Properties of Ti–6Al–4V Alloy from Atomized Powder
|
journal
|
December 2014 |
Titanium powder prepared by a rapid exothermic reaction
|
journal
|
February 2010 |
Thermodynamic Destabilization of Ti-O Solid Solution by H 2 and Deoxygenation of Ti Using Mg
|
journal
|
May 2016 |
The Nature of Tensile Ductility as Controlled by Extreme-Sized Pores in Powder Metallurgy Ti-6Al-4V Alloy
|
journal
|
March 2016 |
Analysis of rheological behaviour of titanium feedstocks formulated with a water-soluble binder system for powder injection moulding
|
journal
|
January 2015 |
Role of Hydrogen in the Process of Sintering of Titanium Powders
|
journal
|
March 2012 |
Strength–Ductility Property Maps of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Review of Processing-Structure-Property Relationships
|
journal
|
February 2017 |
Additive Manufacturing Technologies
|
book
|
January 2010 |
Direct oxygen removal technique for recycling titanium using molten MgCl 2 salt
|
journal
|
January 2016 |
Novel fabrication of titanium by pure microwave radiation of titanium hydride powder
|
journal
|
July 2013 |
Pathways to Optimize Performance/Cost Ratio of Powder Metallurgy Titanium – A Perspective
|
journal
|
August 2012 |
Direct magnesiothermic reduction of titanium dioxide to titanium powder through combustion synthesis
|
journal
|
January 2014 |
Powder metallurgy of titanium alloys
|
journal
|
January 1990 |
Combustion of TiO2–Mg and TiO2–Mg–C systems in the presence of NaCl to synthesize nanocrystalline Ti and TiC powders
|
journal
|
June 2003 |
The influence of microstructural characteristics and contaminants on the mechanical properties and fracture topography of low cost Ti6Al4V alloy
|
journal
|
November 2008 |
Processing of Elemental Titanium by Powder Metallurgy Techniques
|
journal
|
July 2013 |
Effect of isothermal forging on microstructure and fatigue behavior of blended elemental Ti-6Al-4V powder compacts
|
journal
|
March 1986 |
Comparison of sintering of titanium and titanium hydride powders
|
journal
|
March 2010 |
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
|
journal
|
January 2012 |
Low-cost titanium hydride powder metallurgy
|
book
|
January 2015 |
A New, Energy-Efficient Chemical Pathway for Extracting Ti Metal from Ti Minerals
|
journal
|
November 2013 |
Prospects for metal injection moulding using a gamma titanium aluminide based alloy powder
|
journal
|
June 2002 |
A new consumable anode material of titanium oxycarbonitride for the USTB titanium process
|
journal
|
January 2014 |
Sintering of Titanium in Vacuum by Microwave Radiation
|
journal
|
March 2011 |
The FFC-Cambridge Process for Titanium Metal Winning
|
journal
|
May 2010 |
Production of titanium powder directly from TiO2 in CaCl2 through an electronically mediated reaction (EMR)
|
journal
|
February 2005 |
Scavenging of oxygen and chlorine from powder metallurgy (PM) titanium and titanium alloys
|
book
|
January 2015 |
Gradient surface porosity in titanium dental implants: relation between processing parameters and microstructure
|
journal
|
February 2004 |
The powder sintering and isothermal forging of Ti-10V-2Fe-3Al
|
journal
|
November 2008 |
Laser additive manufacturing of metallic components: materials, processes and mechanisms
|
journal
|
May 2012 |
Effect of density and pore morphology on fatigue properties of sintered Ti–6Al–4V
|
journal
|
October 2013 |
Diffusion Bonding Aeroengine Components
|
journal
|
January 1988 |
Study of metal injection molding of highly porous titanium by physical modeling and direct experiments
|
journal
|
July 2014 |
Production of titanium powder by an electrolytic method and compaction of the powder
|
book
|
January 2015 |
Calciothermic reduction of TiO2: A diagrammatic assessment of the thermodynamic limit of deoxidation
|
journal
|
May 2009 |
A novel chemical pathway for energy efficient production of Ti metal from upgraded titanium slag
|
journal
|
February 2016 |
Titanium carbide precipitation in Ti–22Nb alloy fabricated by metal injection moulding
|
journal
|
February 2014 |
Production of Titanium Powder by the Calciothermic Reduction of Titanium Concentrates or Ore Using the Preform Reduction Process
|
journal
|
January 2007 |
Production of titanium specimens from a titanium hydride powder by hot pressing
|
journal
|
February 1986 |
Effects of Purity of Titanium Powder and Porosity on Static Tensile Properties of Sintered Titanium Specimens [Ti焼結体の引張性質に及ぼすTi粉末の純度および多孔率の影響]
|
journal
|
January 1987 |
Impacts of trace carbon on the microstructure of as-sintered biomedical Ti–15Mo alloy and reassessment of the maximum carbon limit
|
journal
|
February 2014 |
Sintering of Ti–10V–2Fe–3Al and mechanical properties
|
journal
|
August 2011 |
Direct reduction of synthetic rutile using the FFC process to produce low-cost novel titanium alloys
|
journal
|
January 2016 |
Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting
|
journal
|
October 2011 |
Titanium Sheet Fabricated from Powder for Industrial Applications
|
journal
|
April 2012 |
Preparation and characterization of extra-low-oxygen titanium
|
journal
|
June 1992 |
A lower carbon footprint process for production of metals from their oxide sources
|
journal
|
February 2008 |
Production of titanium grade 4 components by powder injection moulding of titanium hydride
|
journal
|
April 2014 |
Titanium powder production by preform reduction process (PRP)
|
journal
|
February 2004 |
Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial
|
journal
|
August 2015 |
Microwave Heating, Isothermal Sintering, and Mechanical Properties of Powder Metallurgy Titanium and Titanium Alloys
|
journal
|
November 2012 |
Effect of Sintering Temperature on Density and Tensile Properties of Titanium Compacts by Metal Injection Molding.
|
journal
|
January 1999 |
Porous titanium processed by powder injection moulding of titanium hydride and space holders
|
journal
|
April 2014 |
Superior Fatigue Properties for Blended Elemental P/M Ti-6Al-4V
|
journal
|
August 1986 |
Sintering activation by external electrical field
|
journal
|
August 2000 |
Microwave sintering of titanium and titanium alloys
|
book
|
January 2015 |
A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility
|
journal
|
April 2014 |
Faceted fracture in beta annealed titanium alloys
|
journal
|
March 1979 |
Characterization of the FFC Cambridge Process for NiTi Production Using In Situ X-Ray Synchrotron Diffraction
|
journal
|
January 2010 |
Fatigue Resistance of Powder Metallurgy Ti–6Al–4V Alloy
|
journal
|
May 2004 |
Effect of microstructure on notch fatigue properties of Ti-6Al-4V
|
journal
|
December 1976 |
Cost-Effective Blended Elemental Powder Metallurgy of Titanium Alloys for Transportation Application
|
journal
|
August 2000 |
Microstructures and mechanical properties of titanium alloy connecting rod made by powder forging process
|
journal
|
January 2012 |
Inductive hot-pressing of titanium and titanium alloy powders
|
journal
|
January 2012 |
Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview
|
journal
|
October 2012 |
Metallurgical and mechanical properties of Ti–24Nb–4Zr–8Sn alloy fabricated by metal injection molding
|
journal
|
December 2014 |
Behavior of calcium chloride in reduction process of titanium dioxide by calcium vapor
|
journal
|
November 2013 |
Cost Effective Pure Titanium with High Mechanical Response by Oxide Dispersion Strengthening
|
journal
|
January 2009 |
Conventional titanium powder production
|
book
|
January 2015 |
Fatigue Performance of Powder Metallurgy (PM) Ti-6Al-4V Alloy: A Critical Analysis of Current Fatigue Data and Metallurgical Approaches for Improving Fatigue Strength
|
journal
|
January 2016 |
Effect of the Processing Conditions on Density, Strength and Microstructure of Ti-12Mo Alloy Fabricated by PIM Process.
|
journal
|
January 1999 |
The Production of Ductile Titanium
|
journal
|
January 1940 |
Titanium powder production by TiCl4 gas injection into magnesium through molten salts
|
journal
|
December 1998 |
Impurity (Fe, Cl, and P)-Induced Grain Boundary and Secondary Phases in Commercially Pure Titanium (CP-Ti)
|
journal
|
April 2013 |
Life cycle assessment comparison of emerging and traditional Titanium dioxide manufacturing processes
|
journal
|
February 2015 |
Production of Ti–W Alloys from Mixed Oxide Precursors via the FFC Cambridge Process
|
journal
|
January 2009 |
The Production of Ti–Mo Alloys from Mixed Oxide Precursors via the FFC Cambridge Process
|
journal
|
January 2008 |
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
|
journal
|
September 2000 |
Development of Ti-6Al-4V and Ti-1Al-8V-5Fe Alloys Using Low-Cost TiH2 Powder Feedstock
|
journal
|
September 2012 |
Hydrogen-enabled microstructure and fatigue strength engineering of titanium alloys
|
journal
|
February 2017 |
Microstructural evolution and mechanical properties of the Ti–6Al–4V alloy produced by vacuum hot-pressing
|
journal
|
June 2012 |
Microstructure and mechanical properties of titanium components fabricated by a new powder injection molding technique
|
journal
|
May 2005 |
Calciothermic reduction of titanium oxide in molten CaCl2
|
journal
|
June 2003 |
An experimental study of the (Ti–6Al–4V)–xH phase diagram using in situ synchrotron XRD and TGA/DSC techniques
|
journal
|
February 2015 |
Heating of metallic powders by microwaves: Experiment and theory
|
journal
|
December 2008 |
Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti–2.25Mo–1.5Fe alloy
|
journal
|
September 2012 |
The H−Ti (Hydrogen-Titanium) system
|
journal
|
February 1987 |
Rheological and Thermal Debinding Behaviors in Titanium Powder Injection Molding
|
journal
|
November 2008 |
Application of metal injection molding process to fabrication of bulk parts of TiAl intermetallics
|
journal
|
January 2007 |
Trends in Advanced SPS Spark Plasma Sintering Systems and Technology. Functionally Gradient Materials and Unique Synthetic Processing Methods from Next Generation of Powder Technology. [SPS放電プラズマ焼結法の最近の技術動向 傾斜機能材料の開発にユニークな次世代形粉体加工技術]
|
journal
|
January 1993 |
Tensile Behavior of Sintered Titanium by MIM Process. [特集 粉末の成形・加工 Ti粉末焼結体の引張特性]
|
journal
|
January 1995 |
Processing of Titanium Powder into Consolidated Parts & Sheet
|
journal
|
May 2013 |
Titanium alloy components manufacture from blended elemental powder and the qualification process
|
book
|
January 2015 |
Induction Skull Melting of Titanium and Other Reactive Alloys
|
journal
|
September 1986 |
Electrosynthesis of NbTi and Nb3Sn Superconductors from Oxide Precursors in CaCl2-Based Melts
|
journal
|
November 2005 |
The O−Ti (Oxygen-Titanium) system
|
journal
|
April 1987 |
A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT)
|
journal
|
October 2015 |
Microstructure and mechanical properties of high Nb containing TiAl alloy parts fabricated by metal injection molding
|
journal
|
November 2009 |
Influence of vacuum hot-pressing temperature on the microstructure and mechanical properties of Ti–3Al–2.5V alloy obtained by blended elemental and master alloy addition powders
|
journal
|
December 2012 |
Effects of microwave irradiation on the dehydriding reaction of the composites of lithium borohydride and microwave absorber
|
journal
|
June 2007 |
Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications
|
journal
|
February 2015 |
Novel methods for the production of titanium
|
journal
|
November 2008 |
In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V
|
journal
|
October 2014 |
Reduction of Titanium Dioxide to Metallic Titanium Conducted under the Autogenic Pressure of the Reactants
|
journal
|
August 2009 |
Dehydriding reaction of metal hydrides and alkali borohydrides enhanced by microwave irradiation
|
journal
|
March 2006 |
Influence of foreign particles on fatigue behavior of Ti-6Al-4V prealloyed powder compacts
|
journal
|
February 1986 |
Powder-processing linkages to properties for complex titanium shapes by injection molding
|
book
|
January 2015 |
Injection molding of Ti powder. [チタン粉末の射出成形]
|
journal
|
January 1988 |
Influence of Mean Stress on Fatigue Strength of Ti-6A1-4V
|
book
|
January 1986 |
The Impact of Diffusion on Synthesis of High-Strength Titanium Alloys from Elemental Powder Blends
|
journal
|
May 2010 |
Cost-affordable titanium: The component fabrication perspective
|
journal
|
June 2007 |
Advanced gas atomization processing for Ti and Ti alloy powder manufacturing
|
journal
|
May 2010 |
Sintering Behavior of Titanium Compacts with the Addition of TiH Powder by Using Injection Moldings. [TiH粉末を添加したTi粉末射出成形体の焼結挙動]
|
journal
|
January 1993 |
Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant
|
journal
|
September 2014 |
Direct reduction processes for titanium oxide in molten salt
|
journal
|
January 2007 |
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
|
journal
|
September 2012 |
The effect of lanthanum boride on the sintering, sintered microstructure and mechanical properties of titanium and titanium alloys
|
journal
|
November 2014 |
Calciothermic reduction of titanium oxide and in-situ electrolysis in molten CaCl2
|
journal
|
June 2003 |
Production of Ti–6Al–4V billet through compaction of blended elemental powders by equal-channel angular pressing
|
journal
|
July 2012 |
The FFC Cambridge Process for Production of Low Cost Titanium and Titanium Powders
|
journal
|
May 2010 |
Diffusion during Powder Metallurgy Synthesis of Titanium Alloys
|
journal
|
April 2008 |
Determination of the kinetic pathway in the electrochemical reduction of titanium dioxide in molten calcium chloride
|
journal
|
October 2005 |
High cycle fatigue behaviour of Ti–6Al–4V fabricated by metal injection moulding technology
|
journal
|
March 2009 |
Microwave-assisted fabrication of titanium hollow spheres with tailored shell structures for various potential applications
|
journal
|
November 2012 |
Production of NiTi via the FFC Cambridge Process
|
journal
|
January 2008 |
Cold compaction study of Armstrong Process® Ti–6Al–4V powders
|
journal
|
December 2011 |
Titanium Powder from the TiRO™ Process
|
journal
|
August 2012 |
Investigation of Pressing and Sintering Processes of CP-Ti Powder Made by Armstrong Process
|
journal
|
May 2010 |
Effect of Hot-Isostatic-Pressing Parameters on the Microstructure and Properties of Powder Ti-6Al-4V Hot-Isostatically-Pressed Samples
|
journal
|
February 2010 |
Review of effect of oxygen on room temperature ductility of titanium and titanium alloys
|
journal
|
August 2014 |
Understanding competing fatigue mechanisms in powder metallurgy Ti–6Al–4V alloy: Role of crack initiation and duality of fatigue response
|
journal
|
April 2015 |
Effect of atmosphere on microwave heating of titanium powder
|
journal
|
September 2011 |
Advances in titanium metal injection molding
|
journal
|
May 2007 |
Microstructure and mechanical properties of hot isostatically pressed Ti–6Al–4V alloy
|
journal
|
August 2014 |
Microwave Sintering and Melting of Titanium Powder for Low-Cost Processing
|
journal
|
May 2010 |
The electro-deoxidation of dense titanium dioxide precursors in molten calcium chloride giving a new reaction pathway
|
journal
|
March 2011 |
Particle shape modification and related property improvements
|
journal
|
March 2008 |
Powder sintering and shape-memory behaviour of NiTi compacts synthesized from Ni and TiH2
|
journal
|
October 2004 |
Calciothermic reduction of TiO2 and in situ electrolysis of CaO in the molten CaCl2
|
journal
|
February 2005 |
Metal injection moulding of gamma titanium aluminide alloy powder
|
journal
|
May 2006 |
Development of Recycled TiH<sub>2</sub> Feedstock for Powder Injection Molding
|
journal
|
July 2011 |
Solid oxide membrane technology for environmentally sound production of titanium
|
journal
|
June 2008 |
Evaluation of Low Cost Titanium Alloy Products
|
journal
|
April 2009 |
Void formation, void growth and tensile fracture in Ti-6AI-4V
|
journal
|
June 1978 |
Plasma power can make better powders
|
journal
|
May 2004 |
Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy
|
journal
|
May 2012 |
Dehydrogenation debinding process of MIM titanium alloys by TiH 2 powder
|
journal
|
September 2006 |
Design of powder metallurgy titanium alloys and composites
|
journal
|
February 2006 |
Microwave Sintering of Titanium
|
journal
|
May 2010 |
Nanostructured Ti Consolidated via Spark Plasma Sintering
|
journal
|
November 2010 |
Characteristics of Powder-Rolled and Sintered Sheets Made from HDH Ti Powders
|
journal
|
August 2012 |
A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing
|
journal
|
November 2016 |
There is Low Cost Titanium Componentry Today
|
journal
|
May 2013 |
Effects of thermomechanical treatment on microstructure and mechanical properties of blended elemental Ti-6Al-4V compacts
|
journal
|
June 1988 |
Swelling during sintering of titanium alloys based on titanium hydride powder
|
journal
|
March 2010 |
Trace Carbon in Biomedical Beta-Titanium Alloys: Recent Progress
|
journal
|
August 2015 |
Metal injection molding of titanium
|
book
|
January 2015 |
Metal Injection Moulding of Titanium and Titanium-Aluminides
|
journal
|
August 2012 |
Optimization of Blended-Elemental Powder-Based Titanium Alloy Extrusions for Aerospace Applications
|
journal
|
September 2012 |
The investigation of die-pressing and sintering behavior of ITP CP-Ti and Ti-6Al-4V powders
|
journal
|
November 2012 |
The influence of grain size on the high cycle fatigue crack initiation of a metastable beta Ti alloy
|
journal
|
June 1977 |
In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti–6Al–4V by yttrium hydride
|
journal
|
January 2013 |
Microstructure and mechanical behavior of metal injection molded Ti–Nb binary alloys as biomedical material
|
journal
|
December 2013 |
Producing lower-cost titanium for automotive applications
|
journal
|
September 1998 |
Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process
|
journal
|
August 1996 |
Titanium powders from the hydride–dehydride process
|
book
|
January 2015 |
Titanium and Titanium Alloy via Sintering of TiH<sub>2</sub>
|
journal
|
May 2010 |
A new concept for producing Ti sponge: Calciothermic reduction
|
journal
|
February 2002 |
The effect of molten salt on oxygen removal from titanium and its alloys using calcium
|
journal
|
December 2016 |
Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methods
|
journal
|
February 2013 |
Progress in Titanium Metal Powder Injection Molding
|
journal
|
August 2013 |
Mechanical properties of a TiAl6V4 alloy processed by powder metallurgy
|
journal
|
February 1993 |
Preparation method of Ti powder with oxygen concentration of <1000 ppm using Ca
|
journal
|
December 2012 |
Application of metal injection molding to titanium and titanium hydride powders. [射出成形法のチタンおよびチタン水素化物粉末への応用]
|
journal
|
January 1990 |
Hydrogen sintering of titanium and its alloys
|
book
|
January 2015 |
Fabrication of near-net-shape cost-effective titanium components by use of prealloyed powders and hot isostatic pressing
|
book
|
January 2015 |
Reduction of TiO<SUB>2</SUB> in Molten CaCl<SUB>2</SUB> by Ca Deposited during CaO Electrolysis
|
journal
|
January 2004 |
Plasma atomization: A new process for the production of fine, spherical powders
|
journal
|
June 1996 |
Properties of electrolytic and reduced titanium powders and sinterability of porous compacts from such powders
|
journal
|
May 1968 |
Influence of thermomechanical processing on low cycle fatigue of prealloyed Ti-6AI-4V powder compacts
|
journal
|
December 1983 |
Electrochemical Near-Net-Shape Production Via the FFC Cambridge Process --- Dedication to the Special Session for the 2012 Max Bredig Award
|
journal
|
March 2013 |
Titanium Powder Metallurgy for Automotive Components
|
journal
|
January 2002 |
Microwave Sintering – A Novel Approach to Powder Technology
|
journal
|
January 2010 |
Titanium sheet fabrication from powder
|
book
|
January 2015 |
The automotive application of discontinuously reinforced TiB-Ti composites
|
journal
|
May 2004 |
Observations on microstructurally sensitive fatigue crack growth in a widmanstätten Ti-6Al-4V alloy
|
journal
|
November 1977 |
Application of injection molding to Ti-5wt%Co and Ti-6wt%Al-4wt%V mixed powders. [射出成形法のTi‐5wt%CoおよびTi‐6wt%Al‐4wt%V合金粉末への応用]
|
journal
|
January 1990 |
Fast densification and deformation of titanium powder
|
journal
|
September 2005 |
Extraction of titanium from different titania precursors by the FFC Cambridge process
|
journal
|
August 2006 |