skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Relating Structural and Microstructural Evolution to the Reactivity of Cellulose and Lignin during Alkaline Thermal Treatment with Ca(OH)2 for Sustainable Energy Production Integrated with CO2 Capture

Journal Article · · ACS Sustainable Chemistry & Engineering
 [1]; ORCiD logo [1];  [2]; ORCiD logo [1]
  1. Univ. of Wisconsin, Madison, WI (United States). Dept. of Civil and Environmental Engineering. Grainger Inst. for Engineering
  2. Argonne National Lab. (ANL), Argonne, IL (United States). X-Ray Science Division. Advanced Photon Source

The transition toward a low carbon economy necessitates the implementation of a wide range of negative emissions technologies, including bioenergy integrated with CO2 capture and storage. Advancing large-scale or modular technologies for bioenergy with carbon capture and storage requires a fundamental understanding of chemo-morphological coupling in these material systems. In this context, integrated chemical pathways such as alkaline thermal treatment (ATT) of biomass which involves the production of bio-H2 while converting and storing CO2 as solid carbonates provides promising potential for integrating bioenergy with carbon capture and storage. We elucidate the structural and morphological changes when biomass feedstocks such as cellulose and lignin are reacted with calcium hydroxide to capture, convert, and store CO2 as calcium carbonate while producing energy carrier such as H2. These structural and morphological changes were monitored using synchrotron based in operando multiscale X-ray scattering measurements. Enhanced CO2 capture at temperatures above 375 °C was evident from the significant growth of the calcium carbonate phase at these conditions. Increase in the surface area and porosity of cellulose was noted compared to lignin due to the relatively fast decomposition of cellulose. Pore–solid interfaces in Ca(OH)2 + cellulose system became smoother in the temperature range of 500–700 °C compared to Ca(OH)2 + lignin system, where the interfaces became rougher. Enhanced roughness of the pore–solid interfaces in the presence of lignin is attributed to the simultaneous slow decomposition of lignin and formation of calcium carbonate.

Research Organization:
Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Wisconsin, Madison, WI (United States)
Sponsoring Organization:
USDOE Office of Science (SC); Wisconsin Alumni Research Foundation (United States)
Grant/Contract Number:
AC02-06CH11357
OSTI ID:
1510000
Journal Information:
ACS Sustainable Chemistry & Engineering, Vol. 7, Issue 5; ISSN 2168-0485
Publisher:
American Chemical Society (ACS)Copyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 8 works
Citation information provided by
Web of Science