High Energy Density All-Solid-State Batteries: A Challenging Concept Towards 3D Integration
journal
April 2008
Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
journal
May 2014
3D Printing of Interdigitated Li-Ion Microbattery Architectures
journal
June 2013
Graphene Oxide-Based Electrode Inks for 3D-Printed Lithium-Ion Batteries
journal
February 2016
X-Ray Tomography of Porous, Transition Metal Oxide Based Lithium Ion Battery Electrodes
journal
March 2013
Three-Phase Multiscale Modeling of a LiCoO 2 Cathode: Combining the Advantages of FIB-SEM Imaging and X-Ray Tomography
journal
November 2014
Efficient Management of Parallelism in Object-Oriented Numerical Software Libraries
book
January 1997
The use of mathematical modeling in the design of lithium/polymer battery systems
journal
October 1995
Mathematical modeling of lithium-ion and nickel battery systems
journal
August 2002
Computational battery dynamics (CBD)—electrochemical/thermal coupled modeling and multi-scale modeling
journal
August 2002
Modeling of lithium-ion batteries
journal
June 2003
3-D Microbatteries
journal
February 2003
High power rechargeable batteries
journal
August 2012
Three-dimensional particle-resolved models of Li-ion batteries to assist the evaluation of empirical parameters in one-dimensional models
journal
March 2012
Simulation of diffusion-induced stress using reconstructed electrodes particle structures generated by micro/nano-CT
journal
July 2012
Effects of three-dimensional cathode microstructure on the performance of lithium-ion battery cathodes
journal
January 2013
Three-dimensional electrochemical Li-ion battery modelling featuring a focused ion-beam/scanning electron microscopy based three-phase reconstruction of a LiCoO2 cathode
journal
January 2014
Novel architecture of composite electrode for optimization of lithium battery performance
journal
June 2006
Effect of particle size on LiMnPO4 cathodes
journal
December 2007
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery
journal
April 2008
Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials
journal
May 2010
Modelling electrode material utilization in the trench model 3D-microbattery by finite element analysis
journal
September 2010
A three-dimensional meso-macroscopic model for Li-Ion intercalation batteries
journal
September 2016
3D direct writing fabrication of electrodes for electrochemical storage devices
journal
June 2017
A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing
journal
April 2017
3D printed functional nanomaterials for electrochemical energy storage
journal
August 2017
Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes
journal
January 2018
Challenges for Rechargeable Li Batteries
journal
February 2010
Three-Dimensional Battery Architectures
journal
October 2004
Materials Challenges and Opportunities of Lithium Ion Batteries
journal
January 2011
Triply Periodic Bicontinuous Cubic Microdomain Morphologies by Symmetries
journal
August 2001
Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries
journal
December 2014
High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes
journal
April 2013
A Pressure-Based Method for Unstructured Meshes
journal
March 1997
Validity of the Bruggeman relation for porous electrodes
journal
October 2013
Multifunctional Composites: Optimizing Microstructures for Simultaneous Transport of Heat and Electricity
journal
December 2002
Fabrication of High-Aspect-Ratio Electrode Arrays for Three-Dimensional Microbatteries
journal
August 2007
Analysis of Long-Range Interaction in Lithium-Ion Battery Electrodes
Mistry, Aashutosh; Juarez-Robles, Daniel; Stein, Malcolm
Journal of Electrochemical Energy Conversion and Storage, Vol. 13, Issue 3
https://doi.org/10.1115/1.4035198
journal
August 2016
Thermal-Electrochemical Modeling of Battery Systems
journal
January 2000
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
journal
January 1996
Governing Equations for Transport in Porous Electrodes
journal
January 1997
Micro-Macroscopic Coupled Modeling of Batteries and Fuel Cells
journal
January 1998
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
journal
January 1994
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
journal
January 1993
Optimization of Acetylene Black Conductive Additive and PVDF Composition for High-Power Rechargeable Lithium-Ion Cells
journal
January 2007
Cathode Performance as a Function of Inactive Material and Void Fractions
journal
January 2010
A Framework for Three-Dimensional Mesoscale Modeling of Anisotropic Swelling and Mechanical Deformation in Lithium-Ion Electrodes
journal
January 2014
Characterization of Electronic and Ionic Transport in Li 1- x Ni 0.33 Mn 0.33 Co 0.33 O 2 (NMC 333 ) and Li 1- x Ni 0.50 Mn 0.20 Co 0.30 O 2 (NMC 523 ) as a Function of Li Content
journal
January 2016
Mesoscale Effective Property Simulations Incorporating Conductive Binder
journal
January 2017
Morphological Influence in Lithium-Ion Battery 3D Electrode Architectures
journal
January 2015
Overcharge Performance of 3,7-Bis(trifluoromethyl)- N -ethylphenothiazine at High Concentration in Lithium-Ion Batteries
journal
October 2015
Micro-Scale Modeling of Li-Ion Batteries: Parameterization and Validation
journal
January 2012
Additive Manufacturing: Rethinking Battery Design
journal
January 2016
Three-dimensional electrodes and battery architectures
journal
July 2011
Review of Battery Systems for Electrically Powered Vehicles
conference
May 1968