Quantitative tomography simulations and reconstruction algorithms
X-ray, neutron and proton transmission radiography and computed tomography (CT) are important diagnostic tools that are at the heart of LLNLs effort to meet the goals of the DOE's Advanced Radiography Campaign. This campaign seeks to improve radiographic simulation and analysis so that radiography can be a useful quantitative diagnostic tool for stockpile stewardship. Current radiographic accuracy does not allow satisfactory separation of experimental effects from the true features of an object's tomographically reconstructed image. This can lead to difficult and sometimes incorrect interpretation of the results. By improving our ability to simulate the whole radiographic and CT system, it will be possible to examine the contribution of system components to various experimental effects, with the goal of removing or reducing them. In this project, we are merging this simulation capability with a maximum-likelihood (constrained-conjugate-gradient-CCG) reconstruction technique yielding a physics-based, forward-model image-reconstruction code. In addition, we seek to improve the accuracy of computed tomography from transmission radiographs by studying what physics is needed in the forward model. During FY 2000, an improved version of the LLNL ray-tracing code called HADES has been coupled with a recently developed LLNL CT algorithm known as CCG. The problem of image reconstruction is expressed as a large matrix equation relating a model for the object being reconstructed to its projections (radiographs). Using a constrained-conjugate-gradient search algorithm, a maximum likelihood solution is sought. This search continues until the difference between the input measured radiographs or projections and the simulated or calculated projections is satisfactorily small. We developed a 2D HADES-CCG CT code that uses full ray-tracing simulations from HADES as the projector. Often an object has axial symmetry and it is desirable to reconstruct into a 2D r-z mesh with a limited number of projections. The physics (e.g., scattering and detector response) required in the HADES code is determined from Monte Carlo simulations. The current version of HADES-CCG reconstructs into a volume-density mesh made of one material and assumes a monochromatic source.
- Research Organization:
- Lawrence Livermore National Lab., CA (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 15005122
- Report Number(s):
- UCRL-ID-141591
- Country of Publication:
- United States
- Language:
- English
Similar Records
HADES-CCG, a new tomographic reconstruction tool
HADES, A Code for Simulating a Variety of Radiographic Techniques
Concluding Report: Quantitative Tomography Simulations and Reconstruction Algorithms
Conference
·
Thu Sep 07 00:00:00 EDT 2000
·
OSTI ID:15004015
HADES, A Code for Simulating a Variety of Radiographic Techniques
Conference
·
Thu Oct 28 00:00:00 EDT 2004
·
OSTI ID:15014531
Concluding Report: Quantitative Tomography Simulations and Reconstruction Algorithms
Technical Report
·
Thu Jan 31 23:00:00 EST 2002
·
OSTI ID:15002511