Barrier Foil Heating Simulations Using LASNEX
It is necessary to place a barrier foil in front of the X-ray converter target to prevent the backstreaming ions. This research note presents the simulations of foil heating using the latest EOS tables. LASNEX simulations are carried out using both DARHT-II and ETA-II beam parameters. Results for all the foils studied here, using the DARHT-II beam parameters, show that the integrated line density along the axis at the end of the 4th pulse remains essentially unchanged even if the foils are heated by beams with relatively small beam spot sizes. The temperature can reach up to 3000 C on graphite foil but can only reach several hundred degree Celsius on Mylar foil. Simulations also show that ETA-II beam can create a ''burn-through'' hole on all the foils except graphite and diamond foils, which may require pre-heat. The threshold beam spot size required for hole formation will be compared with LASNEX simulation for the purpose of code verification.
- Research Organization:
- Lawrence Livermore National Lab., CA (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 15004651
- Report Number(s):
- UCRL-ID-147750
- Country of Publication:
- United States
- Language:
- English
Similar Records
Hydrodynamic Expansion of Pellicles Caused by e-Beam Heating
Hydrodynamic Modeling of a Multi-Pulse X-Ray Converter Target for DARHT - II
Downstream System for the Second Axis of the DARHT Facility
Technical Report
·
Mon Jan 31 23:00:00 EST 2000
·
OSTI ID:792635
Hydrodynamic Modeling of a Multi-Pulse X-Ray Converter Target for DARHT - II
Conference
·
Thu Jun 28 00:00:00 EDT 2001
·
OSTI ID:15005028
Downstream System for the Second Axis of the DARHT Facility
Conference
·
Mon Jul 15 00:00:00 EDT 2002
·
OSTI ID:15013574