Preliminary Collab Fracture Characterization Results from Flow and Tracer Testing Efforts
- Idaho National Laboratory
- Stanford
- PNNL
- LBNL
The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine, where hydraulic fractures were created at an injection well drilled sub-horizontal from the drift. Ten tracer tests were conducted to characterize fracture flow pathways during the second hydraulic characterization test for 164’ Notch (October 24th to November 14th, 2018) during steady state injection of 400 ml/min at the injection well. Injected tracers include DNA, C-dots (fluorescein nano particles), fluorescein, rhodamine-b, sodium chloride, lithium bromide and cesium iodine. The tracers have been detected in three flowing wells located about 7.5 to 9 meters away from the injection interval. The tracer breakthrough curves from these locations have been adjusted to account for the residence time in the injection and production tubing. At the time of writing this paper, only the fluorescent C-dots, rhodamine-b and chloride have been analyzed for concentration vs time/volume at the production wells. Results from early testing have been re-analyzed as to the; amount and location of injected water recovery and the mass of tracer recovered.
- Research Organization:
- Idaho National Laboratory (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE Office of Energy Efficiency and Renewable Energy (EERE)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1494917
- Report Number(s):
- INL/CON-18-51813-Rev000
- Country of Publication:
- United States
- Language:
- English
Similar Records
EGS Collab Testbed 1: Tracer data tests
Fracture Tracer Injection Response to Pressure Perturbations at an Injection Well