skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Compositional simulation of hydrocarbon recovery from oil shale reservoirs with diverse initial saturations of fluid phases by various thermal processes

Journal Article · · Energy Exploration and Exploitation
 [1];  [1];  [2]
  1. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Earth Geosciences Div.
  2. Univ. of Houston, TX (United States). Dept. of Petroleum Engineering

We have studied the hydrocarbon production from oil shale reservoirs filled with diverse initial saturations of fluid phases by implementing numerical simulations of various thermal in-situ upgrading processes. We use our in-house fully functional, fully implicit, and non-isothermal simulator, which describes the in-situ upgrading processes and hydrocarbon recovery by multiphase-multicomponent systems. We have conducted two sets of simulation cases—five-spot well pattern problems and Shell In-situ Conversion Process (ICP) problems. In the five-spot well pattern problems, we have analyzed the effects of initial fluid phase that fills the single-phase reservoir and thermal processes by four cases—electrical heating in the single-phase-aqueous reservoir, electrical heating in the single-phase-gaseous reservoir, hot water injection in the single-phase-aqueous reservoir, and hot CO2-injection in the single-phase-gaseous reservoir. In the ICP problems, we have analyzed the effects of initial saturations of fluid phases that fill two-phase-aqueous-and-gaseous reservoir by three cases—initial aqueous phase saturations of 0.16, 0.44, and 0.72. Through the simulation cases, system response and production behavior including temperature profile, kerogen fraction profile, evolution of effective porosity and absolute permeability, phase production, and product selectivity are analyzed. In the five-spot well pattern problems, it is found that the hot water injection in the aqueous phase reservoir shows the highest total hydrocarbon production, but also shows the highest water-oil-mass-ratio. Productions of phases and components show very different behavior in the cases of electrical heating in the aqueous phase reservoir and the gaseous phase reservoir. In the ICP problems, it is found that the speed of kerogen decomposition is almost identical in the cases, but the production behavior of phases and components is very different. It is found that more liquid organic phase has been produced in the case with the higher initial saturation of aqueous phase by the less production of gaseous phase.

Research Organization:
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
USDOE Office of Science (SC)
Grant/Contract Number:
AC02-05CH11231
OSTI ID:
1482518
Journal Information:
Energy Exploration and Exploitation, Vol. 35, Issue 2; ISSN 0144-5987
Publisher:
SAGECopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 10 works
Citation information provided by
Web of Science

References (9)

An Overview of Oil Shale Resources book January 2010
New Challenges and Directions in Oil Shale Development Technologies book January 2010
A Practical Method for Modeling Fluid and Heat Flow in Fractured Porous Media journal February 1985
Oil Shale ICP - Colorado Field Pilots conference April 2013
Numerical Simulation of the In-Situ Upgrading of Oil Shale journal June 2010
Modification of the Kozeny-Carman Equation To Quantify Formation Damage by Fines in Clean, Unconsolidated Porous Media journal November 2014
A Comprehensive Simulation Model of Kerogen Pyrolysis for the In-situ Upgrading of Oil Shales journal October 2016
Numerical simulation of thermal and reaction fronts for oil shale upgrading journal May 2013
Geology and resources of some world oil-shale deposits report January 2006

Cited By (1)

Macro and Meso Characteristics of In-Situ Oil Shale Pyrolysis Using Superheated Steam journal August 2018