Preliminary Desorption studies for HZ-PAN and AgZ-PAN
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
Adsorption of Kr and Xe on HZ-PAN and AgZ-PAN has been the studied extensively. Prior research focused on sorbent capacity and breakthrough of Kr and Xe, with desorption cycles completed in order to close material balances and prepare sorbents for further adsorption testing. This series of tests was designed to determine preliminary information about desorption to guide further research to optimize desorption cycles for each sorbent. A series of desorption tests were run using thermal and pressure swing operations. For AgZ-PAN, these tests indicated that both heat and carrier gas are likely necessary to removed adsorbed gases. However, vacuum pressure and heat may be sufficient to desorb gases from HZ-PAN, which should result in a cleaner Kr stream during desorption. Desorption optimization for both sorbents merits further study in order to make final waste form volume as small as possible.
- Research Organization:
- Idaho National Laboratory (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE Office of Nuclear Energy (NE)
- DOE Contract Number:
- AC07-05ID14517
- OSTI ID:
- 1468544
- Report Number(s):
- INL/EXT--17-43231-Rev000
- Country of Publication:
- United States
- Language:
- English
Similar Records
HZ-PAN and AgZ-PAN Desorption Characterization
Cycle Testing of AgZ-PAN and HZ-PAN
Pressure Swing and Thermal Swing Capacity Comparison for Kr and Xe using AgZ-PAN and HZ-PAN Sorbents
Technical Report
·
Mon Sep 03 00:00:00 EDT 2018
·
OSTI ID:1962370
Cycle Testing of AgZ-PAN and HZ-PAN
Technical Report
·
Thu May 24 00:00:00 EDT 2018
·
OSTI ID:1467488
Pressure Swing and Thermal Swing Capacity Comparison for Kr and Xe using AgZ-PAN and HZ-PAN Sorbents
Technical Report
·
Tue Aug 27 00:00:00 EDT 2013
·
OSTI ID:1107268