Optimal feed flow sequence for multi-effect distillation system integrated with supercritical carbon dioxide Brayton cycle for seawater desalination

Journal Article · Mon Jun 04 00:00:00 EDT 2018 · Journal of Cleaner Production

DOI:https://doi.org/10.1016/j.jclepro.2018.06.009· OSTI ID:1457663

Sharan, Prashant ^[1]; Neises, Ty ^[1]; Turchi, Craig ^[1]

---

1. National Renewable Energy Lab. (NREL), Golden, CO (United States)

Multi-effect distillation is often integrated with a Rankine power cycle for cogeneration (simultaneous production of power and desalinated water). Such integration increases the condenser operating pressure for the Rankine cycle (and increases the heat-rejection temperature) to produce desalinated water, resulting in decreased power-plant efficiency. The supercritical carbon dioxide Brayton cycle has a higher efficiency compared to the Rankine cycle. The waste heat rejected from supercritical carbon dioxide Brayton cycle is at sufficiently hot temperature to have feasible energy integration with multi-effect distillation system. The paper introduces the novel concept of cogeneration without being a parasitic load to the power cycle. For the illustrative example considered, integrating 4-effect distillation system with a 115 MWe power plant can produce 3041 m3 of distillate per day at 1.06 $/m3, at a constant power plant efficiency of 49.2%. The pattern in which feed enters the desalination system often dictates its energy consumption. The two most commonly used feed configurations for multi-effect distillation system are parallel/cross feed and forward feed. With steam as a heat source (i.e., a latent heat source), parallel/cross feed is the most energy-efficient feed configuration. The other objective of this paper is to identify the optimal feed flow configuration for multi-effect distillation system integrated with a supercritical carbon dioxide power cycle (i.e., a sensible heat source). For the simplified network, forward feed is the best feed configuration, which yields a 7.5% increase in distillate production at 2.6% reduced distillate cost. Additionally, different methods for reducing the brine discharge are studied, which can help to achieve zero liquid discharge. Result show increasing the maximum brine concentration gives superior results compared to brine recycling. The system modelling is done using the principle of process integration, and an analytical methodology for cogeneration is derived.

• Research Organization: National Renewable Energy Laboratory (NREL), Golden, CO (United States)
• Sponsoring Organization: USDOE; USDOE National Renewable Energy Laboratory (NREL), Laboratory Directed Research and Development (LDRD) Program
• Grant/Contract Number: AC36-08GO28308
• OSTI ID: 1457663
• Alternate ID(s): OSTI ID: 1582997
• Report Number(s): NREL/JA--5500-70846
• Journal Information: Journal of Cleaner Production, Journal Name: Journal of Cleaner Production Journal Issue: C Vol. 196; ISSN 0959-6526
• Publisher: Elsevier
• Country of Publication: United States
• Language: English

Related Subjects

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION
Brayton cycle
brine recycling
multi-effect distillation
process integration
supercritical carbon dioxide