Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Foaming during nuclear waste melter feeds conversion to glass: Application of evolved gas analysis

Journal Article · · International Journal of Applied Glass Science
DOI:https://doi.org/10.1111/ijag.12353· OSTI ID:1433558
 [1];  [1];  [1];  [2];  [2];  [2];  [3];  [2]
  1. Laboratory of Inorganic Materials Joint Workplace of the University of Chemistry and Technology Prague Prague Czech Republic, The Institute of Rock Structure and Mechanics of the ASCR, v.v.i. Prague Czech Republic
  2. Pacific Northwest National Laboratory Richland WA USA
  3. Office of River Protection U.S. Department of Energy Richland WA USA
Abstract

During the final stages of batch‐to‐glass conversion in a waste‐glass melter, gases evolving in the cold cap produce primary foam, the formation and collapse of which control the glass production rate via its effect on heat transfer to the reacting batch. We performed quantitative evolved gas analysis (EGA) for several HLW melter feeds with temperatures ranging from 100 to 1150°C, the whole temperature span in a cold cap. EGA results were supplemented with visual observation of batch‐to‐glass transition using the feed expansion tests. Upon heating, most of the gases—mainly H 2 O, CO 2 , NO, NO 2 , N 2 , and O 2 —evolve at temperatures below 700°C and escape directly to the atmosphere through open porosity. However, as open porosity closes when enough glass‐forming melt appears at ~720°C, the residual gas evolution leads to the formation of primary foam. We found that primary foaming is mostly caused by the decomposition of residual carbonates, though oxygen evolution from iron‐redox reaction can also play a role. We also show that the gas evolution shifts to a higher temperature when the heating rate increases. The implications for the mathematical modeling of foam layer in the cold cap are presented.

Sponsoring Organization:
USDOE
Grant/Contract Number:
AC05-76RL01830
OSTI ID:
1433558
Alternate ID(s):
OSTI ID: 1557161
Journal Information:
International Journal of Applied Glass Science, Journal Name: International Journal of Applied Glass Science Journal Issue: 4 Vol. 9; ISSN 2041-1286
Publisher:
Wiley-BlackwellCopyright Statement
Country of Publication:
United States
Language:
English

References (30)

Advances in JHCM HLW Vitrification Technology at VSL through Scaled Melter Testing book January 2013
Model for a steady state foam blanket journal January 1990
Possibilities of progress in glass melting journal August 1985
Melt foaming, foam stability and redox in nuclear waste vitrification journal July 1986
On the structure and radiation chemistry of iron phosphate glasses: New insights from electron spin resonance, Mössbauer, and evolved-gas mass spectroscopy journal May 1998
Balance of oxygen throughout the conversion of a high-level waste melter feed to glass journal November 2017
Cluster formation of silica particles in glass batches during melting journal June 2010
Nuclear waste vitrification efficiency: Cold cap reactions journal December 2012
Effect of glass composition on activation energy of viscosity in glass-melting-temperature range journal August 2012
Reaction of soda–lime–silica glass melt with water vapour at melting temperatures journal May 2015
Mathematical modeling of cold cap journal October 2012
Model for the conversion of nuclear waste melter feed to glass journal February 2014
Effect of melter feed foaming on heat flux to the cold cap journal December 2017
Application of evolved gas analysis to cold-cap reactions of melter feeds for nuclear waste vitrification journal September 2014
Reaction Kinetics in Differential Thermal Analysis journal November 1957
Ferrate Treatment for Removing Chromium from High-Level Radioactive Tank Waste journal January 2001
Rhenium Solubility in Borosilicate Nuclear Waste Glass: Implications for the Processing and Immobilization of Technetium-99 journal October 2012
High Temperature Properties and Decomposition of Inorganic Salts Part 3, Nitrates and Nitrites journal July 1972
Control of Radioactive Waste Glass Melters: II, Residence Time and Melt Rate Limitations journal October 1990
Foaming in Glass Melts Produced by Sodium Sulfate Decomposition under Ramp Heating Conditions journal November 1992
Gas Release and Foam Formation During Melting and Fining of Glass journal January 2006
Nuclear Waste Vitrification in the United States: Recent Developments and Future Options: Nuclear Waste Vitrification in the United States. journal September 2010
Melter Feed Reactions at   700°C for Nuclear Waste Vitrification journal July 2015
One‐Dimensional Cold Cap Model for Melters with Bubblers journal July 2015
A Method for Determining Bulk Density, Material Density, and Porosity of Melter Feed During Nuclear Waste Vitrification journal September 2015
Conversion of Nuclear Waste to Molten Glass: Cold-Cap Reactions in Crucible Tests journal May 2016
Effects of heating rate, quartz particle size, viscosity, and form of glass additives on high‐level waste melter feed volume expansion journal October 2016
X‐ray tomography of feed‐to‐glass transition of simulated borosilicate waste glasses journal May 2017
Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion journal July 2017
The effects of melting reactions on laboratory-scale waste vitrification journal August 1995

Similar Records

Foaming during Nuclear Waste Melter Feeds Conversion to Glass: Application of Evolved Gas Analysis
Journal Article · Mon Oct 01 00:00:00 EDT 2018 · International Journal of Applied Glass Science · OSTI ID:1557161

Balance of oxygen throughout the conversion of a high-level waste melter feed to glass
Journal Article · Sun Jul 02 20:00:00 EDT 2017 · Ceramics International · OSTI ID:1368408

One-dimensional cold cap model for melters with bubblers
Journal Article · Mon Jul 27 20:00:00 EDT 2015 · Journal of the American Ceramic Society · OSTI ID:1259504

Related Subjects