Producing KDP and DKDP crystals for the NIF laser
- LLNL
The cost and physics requirements of the NIF have established two important roles for potassium dihydrogen phosphate (KDP) crystals. 1. To extract more laser energy per unit of flashlamp light and laser glass, the NIF has adopted a multipass architecture as shown in Figure 1. Light is injected in the transport spatial filter, first traverses the power amplifiers, and then is directed to main amplifiers, where it makes four passes before being redirected through the power amplifiers towards the target. To enable the multipass of the main amplifiers, a KDP-containing Pockels cell rotates the polarization of the beam to make it either transmit through or reflect off a polarizer held at Brewster's angle within the main laser cavity. If transmitted, the light reflects off a mirror and makes another pass through the cavity. If reflected, it proceeds through the power amplifier to the target. the original seed crystal as the pyramid faces grow. Unfortunately, this pyramidal growth is very slow, and it takes about two years to grow a crystal to NIF size. To provide more programmatic flexibility and reduce costs in the long run, we have developed an alternative technology commonly called rapid growth. Through a combination of higher temperatures and higher supersaturation of the growth solution, a NIF-size boule can be grown in 1 to 2 months from a small ''point'' seed. However, growing boules of adequate size is not sufficient. Care must be taken to prevent inclusions of growth solution and incorporation of atomically substituted 2. Implosions for ICF work far better at shorter wavelengths due to less generation of hot electrons, which preheat the fuel and make it harder to compress. Compromising between optic lifetime and implosion efficiency, both Nova and the NIF operate at a tripled frequency of the 1053-nm fundamental frequency of a neodymium glass laser. This tripling is accomplished by two crystals, one made of KDP and one made of deuterated KDP (DKDP). The first one mixes two 1053-nm photons to make 526-nm light, and the second one combines a residual 1053-nm photon with a 526-nm photon to make 351-nm light.
- Research Organization:
- Lawrence Livermore National Lab., CA (US)
- Sponsoring Organization:
- USDOE Office of Defense Programs (DP) (US)
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 14145
- Report Number(s):
- UCRL-ID-135590; 39DP02000; 39DP02000
- Country of Publication:
- United States
- Language:
- English
Similar Records
The effect of multiple wavelengths on Laser-induced damage in DKDP crystals
Analysis of 1w Bulk Laser Damage in KDP
Differences in Bulk Damage Probability Distributions Between Tripler and Z-Cuts of KDP and DKDP at 355 nm
Journal Article
·
Mon Jul 11 00:00:00 EDT 2005
· Optics Letters
·
OSTI ID:886927
Analysis of 1w Bulk Laser Damage in KDP
Journal Article
·
Mon Apr 11 00:00:00 EDT 2011
· Applied Optics
·
OSTI ID:1022889
Differences in Bulk Damage Probability Distributions Between Tripler and Z-Cuts of KDP and DKDP at 355 nm
Conference
·
Sun Dec 10 23:00:00 EST 2000
·
OSTI ID:15013173