Physical and electrical properties of melt-spun Fe-Si (3–8 wt%) soft magnetic ribbons

Overman, Nicole R.; Jiang, Xiujuan; Kukkadapu, Ravi K.; Clark, Trevor; Roosendaal, Timothy J.; Coffey, Gregory; Shield, Jeffrey E.; Mathaudhu, Suveen N.

doi:10.1016/J.MATCHAR.2017.12.019

Physical and electrical properties of melt-spun Fe-Si (3–8 wt%) soft magnetic ribbons

Journal Article · Tue Dec 12 23:00:00 EST 2017 · Materials Characterization

DOI:https://doi.org/10.1016/J.MATCHAR.2017.12.019· OSTI ID:1413521

Overman, Nicole R. ^[1]; Jiang, Xiujuan ^[1]; Kukkadapu, Ravi K. ^[1]; ^[2]; Roosendaal, Timothy J. ^[1]; Coffey, Gregory ^[1]; Shield, Jeffrey E. ^[3]; Mathaudhu, Suveen N. ^[4]

Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Univ. of California, Riverside, CA (United States)
Univ. of Nebraska, Lincoln, NE (United States)
Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Univ. of California, Riverside, CA (United States)

Fe-Si alloys ranging from 3 to 8 wt% Si were rapidly solidified using melt spinning. Wheel speeds of 30 m/s and 40 m/s were employed to vary cooling rates. Mössbauer spectroscopic studies indicated the Si content significantly influenced the number of Fe sites, relative abundance of various Fe species, and internal magnetic fields/structural environments. Wheel speed altered Fe speciation only in the 3 wt% sample. Scanning electron microscopy confirmed that increasing the wheel speed refined both the ribbon thickness and grain size. Electron backscatter diffraction results suggest tailoring melt spinning process parameters and alloy chemistry may offer the ability to manipulate {001} texture development. In conclusion, electrical resistivity measurements were observed to increase in response to elevated Si content. Increased hardness was correlated to elevated Si content and wheel speed.

View Accepted Manuscript (DOE)

Research Organization:: Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

Sponsoring Organization:: USDOE

Grant/Contract Number:: AC05-76RL01830

OSTI ID:: 1413521

Report Number(s):: PNNL-SA--129219; PII: S1044580317326487

Journal Information:: Materials Characterization, Journal Name: Materials Characterization Vol. 136; ISSN 1044-5803

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (41)

Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient Gutfleisch, Oliver; Willard, Matthew A.; Brück, Ekkes Advanced Materials, Vol. 23, Issue 7 https://doi.org/10.1002/adma.201002180	journal	December 2010
Lattice parameters of FeSi alloy single crystals Polcarová, M.; Kadečková, S.; Br??dler, J. Physica Status Solidi (a), Vol. 106, Issue 1 https://doi.org/10.1002/pssa.2211060103	journal	March 1988
On the interpretation of the mössbauer spectra of ordered FeSi alloys Rixecker, G.; Schaaf, P.; Gonser, U. Physica Status Solidi (a), Vol. 139, Issue 2 https://doi.org/10.1002/pssa.2211390205	journal	October 1993
Production of Al-(12?25) wt% Si alloys by rapid solidification: melt spinning versus centrifugal atomization Todeschini, P.; Champier, G.; Samuel, F. H. Journal of Materials Science, Vol. 27, Issue 13 https://doi.org/10.1007/BF01151831	journal	January 1992
Yttria-zirconia: Effect of microstructure on conductivity Badwal, S. P. S.; Drennan, J. Journal of Materials Science, Vol. 22, Issue 9 https://doi.org/10.1007/BF01161187	journal	September 1987
The effects of grain size on the magnetic properties of nonoriented electrical steel sheets Shiozaki, M.; Kurosaki, Y. Journal of Materials Engineering, Vol. 11, Issue 1 https://doi.org/10.1007/BF02833752	journal	March 1989
Effect of Planar Flow Melt Spinning Parameters on Ribbon Formation in Soft Magnetic Fe68.5Si18.5B9Nb3Cu1 Alloy Srinivas, M.; Majumdar, B.; Phanikumar, G. Metallurgical and Materials Transactions B, Vol. 42, Issue 2 https://doi.org/10.1007/s11663-011-9476-7	journal	February 2011
Voigt-based methods for arbitrary-shape static hyperfine parameter distributions in Mössbauer spectroscopy Rancourt, D. G.; Ping, J. Y. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 58, Issue 1 https://doi.org/10.1016/0168-583X(91)95681-3	journal	May 1991
Ordering influence on magnetic properties of rapidly quenched Fe-6.5 wt% Si Bouchara, D.; Fagot, M.; Degauque, J. Journal of Magnetism and Magnetic Materials, Vol. 83, Issue 1-3 https://doi.org/10.1016/0304-8853(90)90554-4	journal	January 1990
New nanocrystalline high-remanence Nd-Fe-B alloys by rapid solidification Manaf, A.; Buckley, R. A.; Davies, H. A. Journal of Magnetism and Magnetic Materials, Vol. 128, Issue 3 https://doi.org/10.1016/0304-8853(93)90475-H	journal	December 1993
Mechanism of mechanical alloying phase formation and related magnetic and mechanical properties in the FeSi system Abdellaoui, M.; Barradi, T.; Gaffet, E. Journal of Alloys and Compounds, Vol. 198, Issue 1-2 https://doi.org/10.1016/0925-8388(93)90159-K	journal	August 1993
Magnetic hyperfine temperature dependence in Fe–Si crystalline alloys Randrianantoandro, N.; Gaffet, E.; Mira, J. Solid State Communications, Vol. 111, Issue 6 https://doi.org/10.1016/S0038-1098(99)00209-4	journal	July 1999
Effect of grain size and microstructures on resistivity of Mn–Co–Ni thermistor Hosseini, M.; Yasaei, B. Ceramics International, Vol. 24, Issue 7 https://doi.org/10.1016/S0272-8842(97)00054-0	journal	September 1998
Present status of amorphous soft magnetic alloys Hasegawa, Ryusuke Journal of Magnetism and Magnetic Materials, Vol. 215-216 https://doi.org/10.1016/S0304-8853(00)00126-8	journal	June 2000
Magnetic properties of Si rich Fe100–xSix rapidly quenched alloys Sato Turtelli, R.; Grössinger, R.; de Morais, E. Journal of Magnetism and Magnetic Materials, Vol. 177-181 https://doi.org/10.1016/S0304-8853(97)00784-1	journal	January 1998
Microstructure and soft magnetic properties of nanocrystalline Fe–Si powders Ding, J.; Li, Y.; Chen, L. F. Journal of Alloys and Compounds, Vol. 314, Issue 1-2 https://doi.org/10.1016/S0925-8388(00)01234-2	journal	January 2001
Ordered phases and texture in spray-formed Fe–5wt%Si Cava, R. D.; Botta, W. J.; Kiminami, C. S. Journal of Alloys and Compounds, Vol. 509 https://doi.org/10.1016/j.jallcom.2010.11.184	journal	June 2011
Mechanical properties of a FeCuSiB alloy with amorphous and/or crystalline structures Sun, Y. Y.; Song, M.; Liao, X. Z. Journal of Alloys and Compounds, Vol. 509, Issue 23 https://doi.org/10.1016/j.jallcom.2011.03.103	journal	June 2011
Effects of order–disorder reactions on rapidly quenched Fe–6.5%Si alloy Lima, Claudio Cassio; da Silva, Mário Cezar Alves; Sobral, Maria Dorotéia Costa Journal of Alloys and Compounds, Vol. 586 https://doi.org/10.1016/j.jallcom.2012.09.074	journal	February 2014
Production of high silicon steel for electrical applications by thermomechanical processing Ros-Yañez, T.; Houbaert, Y.; Fischer, O. Journal of Materials Processing Technology, Vol. 143-144 https://doi.org/10.1016/j.jmatprotec.2003.10.002	journal	December 2003
Magnetic properties of high silicon iron sheet fabricated by direct powder rolling Li, Ran; Shen, Qiang; Zhang, Lianmeng Journal of Magnetism and Magnetic Materials, Vol. 281, Issue 2-3 https://doi.org/10.1016/j.jmmm.2004.04.098	journal	October 2004
The effect of Si and Al concentration gradients on the mechanical and magnetic properties of electrical steel Barros, J.; Ros-Yañez, T.; Vandenbossche, L. Journal of Magnetism and Magnetic Materials, Vol. 290-291 https://doi.org/10.1016/j.jmmm.2004.11.547	journal	April 2005
Determining the effect of grain size and maximum induction upon coercive field of electrical steels Landgraf, Fernando José Gomes; da Silveira, João Ricardo Filipini; Rodrigues-Jr., Daniel Journal of Magnetism and Magnetic Materials, Vol. 323, Issue 18-19 https://doi.org/10.1016/j.jmmm.2011.03.034	journal	October 2011
Production and annealing of nanocrystalline Fe–Si and Fe–Si–Al alloy powders Zuo, B.; Saraswati, N.; Sritharan, T. Materials Science and Engineering: A, Vol. 371, Issue 1-2 https://doi.org/10.1016/j.msea.2003.11.046	journal	April 2004
Magnetic properties evaluation of spray formed and rolled Fe–6.5wt.% Si–1.0wt.% Al alloy Kasama, A. H.; Bolfarini, C.; Kiminami, C. S. Materials Science and Engineering: A, Vol. 449-451 https://doi.org/10.1016/j.msea.2006.02.318	journal	March 2007
Disordering induced work softening of Fe–6.5wt%Si alloy during warm deformation Li, Hui; Liang, Y. F.; Yang, W. Materials Science and Engineering: A, Vol. 628 https://doi.org/10.1016/j.msea.2015.01.058	journal	March 2015
Study of order-disorder effect on magnetic properties of rapidly quenched Fe-6.5 wt% Si alloys Faudot, F.; Rialland, J. F.; Bigot, J. Physica Scripta, Vol. 39, Issue 2 https://doi.org/10.1088/0031-8949/39/2/013	journal	February 1989
Mössbauer Study of Ordering in FeSi Alloys Häggström, L.; Grånäs, L.; Wäppling, R. Physica Scripta, Vol. 7, Issue 3 https://doi.org/10.1088/0031-8949/7/3/005	journal	March 1973
Internal Magnetic Fields, Isomer Shifts, and Relative Abundances of the Various Fe Sites in FeSi Alloys Stearns, M. B. Physical Review, Vol. 129, Issue 3 https://doi.org/10.1103/PhysRev.129.1136	journal	February 1963
Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets Herzer, G. IEEE Transactions on Magnetics, Vol. 26, Issue 5, p. 1397-1402 https://doi.org/10.1109/20.104389	journal	January 1990
Ribbon-form silicon-iron alloy containing around 6.5 percent silicon Arai, K.; Tsuya, N. IEEE Transactions on Magnetics, Vol. 16, Issue 1 https://doi.org/10.1109/TMAG.1980.1060560	journal	January 1980
Effect of atomic order on the electrical and magnetic properties of Fe/sub 100-x/Si/sub x/ (6 Ruiz, D.; Ros-Yanez, T.; Ortega, L. IEEE Transactions on Magnetics, Vol. 41, Issue 10 https://doi.org/10.1109/TMAG.2005.854723	journal	October 2005
Structural and Magnetic Properties of ${\hbox{Fe}}_{100\hbox{-}{\rm x}}{\hbox{Si}}_{\rm x}$ ($0\le x \le 40$) Nanocrystalline Alloy Powders Shyni, P. C.; Perumal, A. IEEE Transactions on Magnetics, Vol. 50, Issue 1 https://doi.org/10.1109/TMAG.2013.2278555	journal	January 2014
Elements of X-Ray Diffraction Cullity, B. D.; Weymouth, John W. American Journal of Physics, Vol. 25, Issue 6 https://doi.org/10.1119/1.1934486	journal	September 1957
Fluid Mechanics of spin Casting of Metals Steen, Paul H.; Karcher, Christian Annual Review of Fluid Mechanics, Vol. 29, Issue 1 https://doi.org/10.1146/annurev.fluid.29.1.373	journal	January 1997
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583 https://doi.org/10.1557/JMR.1992.1564	journal	June 1992
High Saturation Magnetization and Soft Magnetic Properties of bcc Fe–Zr–B and Fe–Zr–B–M (M=Transition Metal) Alloys with Nanoscale Grain Size Suzuki, K.; Makino, A.; Kataoka, N. Materials Transactions, JIM, Vol. 32, Issue 1 https://doi.org/10.2320/matertrans1989.32.93	journal	January 1991
Efficient Generation of Cube-on-Face Crystallographic Texture in Iron and its Alloys Sung, Jin Kyung; Lee, Dong Nyung; Wang, Duck Hyun ISIJ International, Vol. 51, Issue 2 https://doi.org/10.2355/isijinternational.51.284	journal	January 2011
Experimental and Thermodynamic Studies of the Fe–Si Binary System Ohnuma, Ikuo; Abe, Shinya; Shimenouchi, Shota ISIJ International, Vol. 52, Issue 4 https://doi.org/10.2355/isijinternational.52.540	journal	January 2012
Effects of Manufacturing Parameters in Planar Flow Casting Process on Ribbon Formation and Puddle Evolution of Fe–Si–B Alloy Su, Yu-Guang; Chen, Falin; Wu, Chung-Yung ISIJ International, Vol. 55, Issue 11 https://doi.org/10.2355/isijinternational.ISIJINT-2015-349	journal	January 2015
Silicon-substituted magnetite and accompanying iron oxides and hydroxides from the Kumano mine, Yamaguchi Prefecture, Japan: Reexamination of the so-called maghemite (γ-Fe2O3) Ohkawa, Makio; Miyahara, Masaaki; Ohta, Eri Journal of Mineralogical and Petrological Sciences, Vol. 102, Issue 3 https://doi.org/10.2465/jmps.050706	journal	January 2007

Cited By (2)

Microwave absorption properties of easy-plane anisotropy Fe–Si powders with surface modification in the frequency range of 0.1–4 GHz Duan, Benfang; Zhang, Junming; Wang, Guowu Journal of Materials Science: Materials in Electronics, Vol. 30, Issue 14 https://doi.org/10.1007/s10854-019-01764-5	journal	June 2019
Structure and elasticity of cubic Fe-Si alloys at high pressures Edmund, E.; Antonangeli, D.; Decremps, F. Physical Review B, Vol. 100, Issue 13 https://doi.org/10.1103/physrevb.100.134105	journal	October 2019

Similar Records

Physical and electrical properties of melt-spun Fe-Si (3–8 wt.%) soft magnetic ribbons

Journal Article · Wed Jan 31 23:00:00 EST 2018 · Materials Characterization · OSTI ID:1430417

Physical and electrical properties of melt-spun Fe-Si (3–8 wt.%) soft magnetic ribbons

Journal Article · Wed Feb 14 23:00:00 EST 2018 · Materials Characterization · OSTI ID:22804892

Investigation of structural and magnetic properties of rapidly-solidified iron-silicon alloys at ambient and elevated temperatures

Journal Article · Mon Jan 08 23:00:00 EST 2018 · Journal of Alloys and Compounds · OSTI ID:1416968

Related Subjects

36 MATERIALS SCIENCE
Fe-Si
Magnetization
Melt-spinning
Microstructure
Soft magnet

Physical and electrical properties of melt-spun Fe-Si (3–8 wt%) soft magnetic ribbons

Citation Formats

References (41)

Cited By (2)

Similar Records

Related Subjects