Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Amorphous MoS 3 Infiltrated with Carbon Nanotubes as an Advanced Anode Material of Sodium‐Ion Batteries with Large Gravimetric, Areal, and Volumetric Capacities

Journal Article · · Advanced Energy Materials
 [1];  [1];  [1];  [2];  [1];  [3];  [1];  [4];  [1];  [1];  [1];  [3];  [1];  [1];  [1];  [1];  [2]
  1. Institute of Functional Nano and Soft Materials (FUNSOM) Jiangsu Key Laboratory for Carbon‐Based Functional Materials and Devices Soochow University Suzhou 215123 China
  2. Chemical Sciences and Engineering Division Argonne National Laboratory Lemont IL 60439 USA
  3. Department of Chemistry Dalhousie University Halifax NS B3H 4R2 Canada
  4. Department of Chemical Engineering University of Waterloo Ontario N2L 3G1 Canada
+ Show Author Affiliations

The search for earth‐abundant and high‐performance electrode materials for sodium‐ion batteries represents an important challenge to current battery research. 2D transition metal dichalcogenides, particularly MoS 2 , have attracted increasing attention recently, but few of them so far have been able to meet expectations. In this study, it is demonstrated that another phase of molybdenum sulfide—amorphous chain‐like MoS 3 —can be a better choice as the anode material of sodium‐ion batteries. Highly compact MoS 3 particles infiltrated with carbon nanotubes are prepared via the facile acid precipitation method in ethylene glycol. Compared to crystalline MoS 2 , the resultant amorphous MoS 3 not only exhibits impressive gravimetric performance—featuring excellent specific capacity (≈615 mA h g −1 ), rate capability (235 mA h g −1 at 20 A g −1 ), and cycling stability but also shows exceptional volumetric capacity of ≈1000 mA h cm −3 and an areal capacity of >6.0 mA h cm −2 at very high areal loadings of active materials (up to 12 mg cm −2 ). The experimental results are supported by density functional theory simulations showing that the 1D chains of MoS 3 can facilitate the adsorption and diffusion of Na + ions. At last, it is demonstrated that the MoS 3 anode can be paired with an Na 3 V 2 (PO 4 ) 3 cathode to afford full cells with great capacity and cycling performance.

Sponsoring Organization:
USDOE
Grant/Contract Number:
AC02-06CH11357
OSTI ID:
1401718
Journal Information:
Advanced Energy Materials, Journal Name: Advanced Energy Materials Journal Issue: 5 Vol. 7; ISSN 1614-6832
Publisher:
Wiley Blackwell (John Wiley & Sons)Copyright Statement
Country of Publication:
Germany
Language:
English

References (60)

From Bulk to Monolayer MoS2: Evolution of Raman Scattering journal January 2012
Layered SnS 2 -Reduced Graphene Oxide Composite - A High-Capacity, High-Rate, and Long-Cycle Life Sodium-Ion Battery Anode Material journal March 2014
Solution-Processed Two-Dimensional Metal Dichalcogenide-Based Nanomaterials for Energy Storage and Conversion journal April 2016
Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries journal May 2012
Superior Electrochemical Performance and Storage Mechanism of Na 3 V 2 (PO 4 ) 3 Cathode for Room-Temperature Sodium-Ion Batteries journal October 2012
The First Report on Excellent Cycling Stability and Superior Rate Capability of Na 3 V 2 (PO 4 ) 3 for Sodium Ion Batteries journal November 2012
Ultrathin MoS 2 Nanosheets as Anode Materials for Sodium-Ion Batteries with Superior Performance journal December 2014
Nanoflake-Assembled Hierarchical Na 3 V 2 (PO 4 ) 3 /C Microflowers: Superior Li Storage Performance and Insertion/Extraction Mechanism journal February 2015
Ni 3+ -Induced Formation of Active NiOOH on the Spinel Ni-Co Oxide Surface for Efficient Oxygen Evolution Reaction journal February 2015
MoS 2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium-Ion Batteries journal December 2015
MoS 2 Nanoflowers with Expanded Interlayers as High-Performance Anodes for Sodium-Ion Batteries journal September 2014
Single-Layered Ultrasmall Nanoplates of MoS 2 Embedded in Carbon Nanofibers with Excellent Electrochemical Performance for Lithium and Sodium Storage journal January 2014
Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance journal September 2014
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage journal February 2015
Water-Soluble MoS 3 Nanoparticles for Photocatalytic H 2 Evolution journal March 2015
An Advanced MoS 2 /Carbon Anode for High-Performance Sodium-Ion Batteries journal September 2014
Thermal decomposition of (NH4)2MoO2S2, (NH4)2MoS4, (NH4)2WO2S2 and (NH4)2WS4 journal June 1973
Amorphous molybdenum trisulfide: A new lithium battery cathode journal November 1979
Comparative IR and Raman studies of various amorphous MoS3 and LixMoS3 phases journal July 1989
High mass loading, binder-free MXene anodes for high areal capacity Li-ion batteries journal May 2015
Ab initio characterization of layered MoS2 as anode for sodium-ion batteries journal December 2014
Prospects for reducing the processing cost of lithium ion batteries journal February 2015
Enhanced photoelectrochemical hydrogen production using silicon nanowires@MoS3 journal November 2013
Hierarchical nanotubes assembled from MoS 2 -carbon monolayer sandwiched superstructure nanosheets for high-performance sodium ion batteries journal April 2016
Two-Dimensional Transition Metal Dichalcogenide Monolayers as Promising Sodium Ion Battery Anodes journal November 2015
Sn 4+ Ion Decorated Highly Conductive Ti 3 C 2 MXene: Promising Lithium-Ion Anodes with Enhanced Volumetric Capacity and Cyclic Performance journal January 2016
A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative Electrodes journal February 2016
Electrical, Mechanical, and Capacity Percolation Leads to High-Performance MoS 2 /Nanotube Composite Lithium Ion Battery Electrodes journal May 2016
Effective Liquid-Phase Exfoliation and Sodium Ion Battery Application of MoS 2 Nanosheets journal May 2014
Capacitive Energy Storage in Nanostructured Carbon–Electrolyte Systems journal June 2012
Research Development on Sodium-Ion Batteries journal October 2014
Growth and Activation of an Amorphous Molybdenum Sulfide Hydrogen Evolving Catalyst journal August 2013
Engineering the Composition and Crystallinity of Molybdenum Sulfide for High-Performance Electrocatalytic Hydrogen Evolution journal November 2014
Modeling the Structure of Amorphous MoS 3 :  A Neutron Diffraction and Reverse Monte Carlo Study journal January 2004
Evidence from in Situ X-ray Absorption Spectroscopy for the Involvement of Terminal Disulfide in the Reduction of Protons by an Amorphous Molybdenum Sulfide Electrocatalyst journal December 2014
Synergistic Na-Storage Reactions in Sn 4 P 3 as a High-Capacity, Cycle-stable Anode of Na-Ion Batteries journal March 2014
Carbon-Coated Na 3 V 2 (PO 4 ) 3 Embedded in Porous Carbon Matrix: An Ultrafast Na-Storage Cathode with the Potential of Outperforming Li Cathodes journal March 2014
Mesoporous Amorphous FePO 4 Nanospheres as High-Performance Cathode Material for Sodium-Ion Batteries journal May 2014
MoS 2 /Graphene Composite Paper for Sodium-Ion Battery Electrodes journal January 2014
Self-assembly of hierarchical MoSx/CNT nanocomposites (2 journal July 2013
Amorphous molybdenum sulfide films as catalysts for electrochemical hydrogen production in water journal January 2011
Lithium ion battery applications of molybdenum disulfide (MoS 2 ) nanocomposites journal January 2014
Reversible sodium storage via conversion reaction of a MoS 2 –C composite journal January 2014
A high tap density secondary silicon particle anode fabricated by scalable mechanical pressing for lithium-ion batteries journal January 2015
Electrochemical properties of all-solid-state lithium batteries with amorphous MoS 3 electrodes prepared by mechanical milling journal January 2015
Nanostructured CuP 2 /C composites as high-performance anode materials for sodium ion batteries journal January 2015
Iron-based sodium-ion full batteries journal January 2016
Model oxide supported MoS2 HDS catalysts: structure and surface properties journal January 2011
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems journal January 2012
Hydrogen evolution catalyzed by MoS3 and MoS2 particles journal January 2012
Conversion reactions for sodium-ion batteries journal January 2013
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage journal January 2013
Real-space multiple-scattering calculation and interpretation of x-ray-absorption near-edge structure journal September 1998
ATHENA , ARTEMIS , HEPHAESTUS : data analysis for X-ray absorption spectroscopy using IFEFFIT journal June 2005
WinXAS a Program for X-ray Absorption Spectroscopy Data Analysis under MS-Windows journal March 1998
True Performance Metrics in Electrochemical Energy Storage journal November 2011
Amorphous Molybdenum Sulfide Electrodes for Nonaqueous Electrochemical Cells journal January 1987
A Rechargeable All-Solid-State Sodium Cell with Polymer Electrolyte journal January 1985
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes journal November 2015
Thick Electrodes for High Energy Lithium Ion Batteries journal January 2015

Similar Records

Related Subjects