Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Surveillance data on neutron embrittlement of modern low-sensitivity steel

Book ·
OSTI ID:139993
; ; ; ;  [1]
  1. Univ. of Ljubljana (Slovenia). Jozef Stefan Inst.
The reactor pressure vessel of the Krsko Nuclear Power Plant, a two-loop 632-MWe pressurized water reactor, is made of SA 533 grade B class 1 steel plate welded by wire type B-4 Linde 0091. Copper content of both metals is low. Results of impact testing of reactor pressure vessel specimens from the first two withdrawn surveillance capsules are reported. Neutron exposure of the capsules was near 1 and 3 {center_dot} 10{sup 19} ncm{sup {minus}2} E > 1 MeV, respectively. The exposure rate was around 1.5 {center_dot} 10{sup 11} n s {sup {minus}1} cm{sup {minus}2} E > 1 MeV. Measured shifts in nil ductility temperature and impact upper shelf energy are compared with predictions of Nuclear Regulatory Commission (NRC) Regulatory Guide RG 1.99 Rev. 2. Nil ductility temperature shifts are in good agreement for base metal, whereas they are underpredicted for weld. Small or negligible upper shelf energy shifts were observed. Instrumented impact testing data are analyzed. Results are compared with a recent analysis of instrumented data from the power reactor embrittlement database.
OSTI ID:
139993
Report Number(s):
CONF-9009544--; ISBN 0-8031-1478-8
Country of Publication:
United States
Language:
English