Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

GEOTEMP2. Advanced Wellbore Thermal Simulator

Technical Report ·
OSTI ID:139053
 [1]; ;  [2]
  1. Enertech Engineering and Research Co., Houston, TX (United States)
  2. Sandia National Labs., Albuquerque, NM (United States)

GEOTEMP2, which is based on the earlier GEOTEMP program, is a wellbore thermal simulator designed for geothermal well drilling and production applications. The code treats natural and forced convection and conduction within the wellbore and heat conduction within the surrounding rock matrix. A variety of well operations can be modeled including injection, production, forward and reverse circulation with gas or liquid, gas or liquid drilling, and two-phase steam injection and production. Well completion with several different casing sizes and cement intervals can be modeled. The code allows variables, such as flow rate, to change with time enabling a realistic treatment of well operations. Provision is made in the flow equations to allow the flow areas of the tubing to vary with depth in the wellbore. Multiple liquids can exist in GEOTEMP2 simulations. Liquid interfaces are tracked through the tubing and annulus as one liquid displaces another. GEOTEMP2, however, does not attempt to simulate displacement of liquids with a gas or two-phase steam or vice versa. This means that it is not possible to simulate an operation where the type of drilling fluid changes, e.g. mud going to air. GEOTEMP2 was designed primarily for use in predicting the behavior of geothermal wells, but it is flexible enough to handle many typical drilling, production, and injection problems in the oil industry as well. However, GEOTEMP2 does not allow the modeling of gas-filled annuli in production or injection problems. In gas or mist drilling, no radiation losses are included in the energy balance. No attempt is made to model flow in the formation. Average execution time is 50 CP seconds on a CDC CYBER170. This edition of GEOTEMP2 is designated as Version 2.0 by the contributors.

Research Organization:
Sandia National Labs., Albuquerque, NM (United States)
Sponsoring Organization:
USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
139053
Report Number(s):
ESTSC--000291C017000; NESC--9771
Country of Publication:
United States
Language:
English

Similar Records

Advanced Wellbore Thermal Simulator
Software · Tue Mar 03 19:00:00 EST 1992 · OSTI ID:code-12100

Advanced wellbore thermal simulator GEOTEMP2 user manual
Technical Report · Wed Oct 31 23:00:00 EST 1984 · OSTI ID:6248257

Advanced wellbore thermal simulator: GEOTEMP2 user manual
Technical Report · Sun Jan 31 23:00:00 EST 1982 · OSTI ID:5200840